ROHM Semiconductor

LMR821G-GTR - Low-Power Ground-Sense Op Amp | ROHM

料号: LMR821G-GTR ✓ 量产中
5-SSOP, SC-74A, SOT-753 Package
最小起订量: 1 |

LMR821G-GTR 概述

The ROHM Semiconductor LMR821G-GTR is a single-circuit, low-power ground-sense operational amplifier designed for low-voltage and low-supply-current operation. It is packaged in a compact 5-SSOP enclosure, also identified as SC-74A or SOT-753, for space-constrained sensing and signal-conditioning circuits.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. A ground-sense amplifier is used where the measured signal is referenced close to ground, such as in current-shunt monitoring, low-side sensing, and portable instrumentation. This amplifier belongs to the broader operational amplifier, analog IC, and semiconductor hierarchies.

The LMR821G-GTR is specifically identified by ROHM as a low-power ground-sense operational amplifier. Its single-amplifier configuration reduces board area and is suitable for designs that need one sensing channel rather than a dual or quad device. The low-voltage and low-supply-current positioning makes it relevant to compact, battery-powered, and low-energy measurement systems.

The LMR821G product family emphasizes low-voltage operation and low supply current. These characteristics help reduce the energy required when the amplifier remains connected to a low-capacity power source. Exact input-voltage limits, output-current capability, offset voltage, noise, bandwidth, and open-loop gain should be taken from the ROHM LMR821G datasheet when setting circuit operating points.

Typical uses include low-side current detection, portable sensor interfaces, battery monitoring, and low-voltage signal conditioning. In these applications, the amplifier boosts a small ground-referenced differential signal while adding only modest circuit overhead. Its 5-pin surface-mount package also supports compact layouts, although pad geometry and exposed thermal-pad details must be confirmed against the package drawing.

Use the manufacturer pin-description table when assigning PCB tracks because the complete numbered pin list is not included in the product-page summary. Confirm input common-mode range, output swing, unity-gain stability, and recommended external components before finalizing a high-gain or precision design.

This page combines the manufacturer product information, exact-MPN distributor records, package details, application guidance, and engineering selection notes in one searchable reference. It is intended to accelerate sourcing and initial circuit assessment, while final qualification should follow the complete ROHM datasheet and application circuits.

直接替换替代料: LMR821G-GTR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

LMR821G-GTR 最大额定值与电气特性

Product Type Operational amplifier
Amplifier Configuration 1 circuit
Operating Class Standard (general purpose)
Application Category Low-power ground-sense operational amplifier
封装 5-SSOP, SC-74A, SOT-753
安装类型 Surface mount

LMR821G-GTR 5-ssop, sc-74a, sot-753 引脚配置指南

LMR821G-GTR(5-ssop, sc-74a, sot-753 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LMR821G-GTR 的 5-ssop, sc-74a, sot-753 封装引脚图

暂无详细引脚数据: LMR821G-GTR.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LMR821G-GTR 适用于 6 应用s: Low-Side Current Sensing, Portable Sensor Interfacing, Battery-Powered Monitoring, Industrial Process Measurement, Low-Voltage Control Loops, Portable Instrumentation.

🔧

Low-Side Current Sensing

The LMR821G-GTR is appropriate for amplifying a small voltage developed across a low-side shunt, where the signal is referenced near ground. Its one-circuit ground-sense architecture concentrates the active amplifier in a compact 5-SSOP package, while the low-voltage and low-supply-current positioning supports efficient measurement paths. Before finalizing the shunt stage, verify the amplifier input common-mode range, offset voltage, input bias current, and noise against the ROHM datasheet. Also confirm that the shunt resistance and amplifier gain keep the output within the available output swing while providing adequate resolution for the target current.

🔧

Portable Sensor Interfacing

The LMR821G-GTR can serve as the analog gain stage for a compact, battery-powered sensor interface when the sensor produces a small ground-referenced signal. Its low-voltage and low-supply-current characteristics are useful when every milliamp of amplifier demand affects the available energy budget. The single amplifier in a 5-SSOP package also reduces board footprint compared with a dual or quad alternative. Confirm the sensor output range, supply voltage, signal bandwidth, and required noise performance. A practical design should also evaluate input bias current so that high-impedance sensor nodes are not excessively loaded.

🔧

Battery-Powered Monitoring

For battery-operated monitoring electronics, the LMR821G-GTR provides a low-power path for conditioning a ground-referenced measurement signal. Its low-voltage operating orientation fits systems where the available supply is limited, and the single-amplifier configuration avoids allocating unused channels. Use it when the measured quantity produces a differential voltage close to ground and the required bandwidth can be met. The ROHM datasheet should establish the minimum supply voltage, common-mode limits, quiescent demand, and output behavior before the battery budget is approved. Pair the amplifier with suitably stable reference and sensing components.

🔧

Industrial Process Measurement

The LMR821G-GTR is relevant to compact industrial signal-conditioning modules that measure a small differential voltage near the system ground. Its one-circuit format is efficient for dedicated single-channel measurement nodes, and the 5-SSOP surface-mount package supports automated PCB assembly. Ground-sense use can simplify sensing from low-side shunts or grounded transducers. For industrial deployment, confirm the device's operating-temperature range, input and output limits, noise, offset, and electromagnetic-immunity needs. Printed-circuit layout must keep sensing traces away from switching nodes, and grounding must preserve the low-level signal path.

🔧

Low-Voltage Control Loops

The LMR821G-GTR can amplify error or feedback signals in a low-voltage control system where the controlled node is referenced close to ground. The low-power characterization is beneficial when the amplifier must remain active continuously, while the single-circuit package leaves room for additional control functions on the same board. Validate loop stability, bandwidth, slew rate, output swing, and phase margin before using it inside a feedback regulator or servo path. The amplifier's ground-referenced role also makes trace routing and reference-ground continuity important because poor ground separation can undermine the benefit of the internal signal-conditioning stage.

🔧

Portable Instrumentation

The LMR821G-GTR is suitable for compact handheld or field-test instrumentation that conditions a low-level differential signal without requiring a high-power amplifier. Its single-circuit, 5-SSOP configuration is useful when board area and supply demand are constrained, while low-voltage operation supports portable power architectures. Determine whether the measured source requires rail-to-rail input or output behavior by checking the manufacturer limits rather than assuming those characteristics. Account for offset and noise when calculating the smallest resolvable input. A solid reference design should include local supply bypassing, careful shunt grounding, and protection appropriate to the external sensor wiring.

What is the LMR821G-GTR?
The LMR821G-GTR is a single-circuit, low-power ground-sense operational amplifier from ROHM Semiconductor. It is intended for low-voltage operation and low supply-current consumption, with the amplifier supplied in a 5-SSOP package, also identified as SC-74A or SOT-753. According to the ROHM product page, its ground-sense orientation is intended for applications involving signals referenced close to ground.
Where can I download the LMR821G-GTR datasheet PDF?
The official LMR821G-GTR product information is available on the ROHM product page identified by the exact LMR821G-GTR family name. Use the datasheet and package links on that page to obtain the manufacturer PDF. The distributor search results also identify the device as a one-circuit, 5-SSOP operational amplifier, but the ROHM document should be used for electrical limits, pin assignments, test conditions, and recommended application circuits.
What is the LMR821G-GTR pinout?
The LMR821G-GTR uses a 5-SSOP, SC-74A, or SOT-753 package with five physical terminals. The complete numbered terminal names are not stated in the product-page summary, so use the pin-description table in the ROHM LMR821G datasheet before routing the PCB. Do not infer input, output, supply, and ground positions from another SOIC-5 amplifier because the package outline alone does not establish pin compatibility.
Where to buy LMR821G-GTR online?
Use the Request a Quote form on this page to request LMR821G-GTR availability, current commercial terms, and a shipment plan. The exact device is listed by its manufacturer and by multiple authorized component channels under the full suffix GTR, which identifies the specified package and ordering configuration. Share your target quantity and delivery requirements with the supplier so the quote is tied to the exact ordering code.
What is the price of LMR821G-GTR?
Use the Request a Quote form on this page for the current LMR821G-GTR commercial quotation. The quantity, stock position, package, and delivery schedule can affect final commercial terms, so a quote based on your actual demand is more useful than a generic single-unit reference. The structured pricing area on this page is the preferred route for obtaining current purchasing information for the exact MPN.
What is the lead time for LMR821G-GTR?
Current lead time for LMR821G-GTR should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, current inventory, destination, and required delivery terms. The exact GTR suffix and 5-SSOP package should remain unchanged on the request so that the supplier confirms the same single-circuit ground-sense operational amplifier rather than a related LMR821G configuration.
Is LMR821G-GTR in stock?
Request current stock status for LMR821G-GTR using the Request a Quote form on this page. Inventory records change continuously, and a listing marked in stock does not guarantee allocation at a later date. Include your required quantity, target date, and approved manufacturer or channel preference when requesting confirmation. This approach preserves traceability to the exact LMR821G-GTR ordering code.
Is LMR821G-GTR suitable for low-side current sensing?
The LMR821G-GTR is suitable for evaluating whether a ground-referenced low-side shunt signal fits the required amplifier application. Its defining features are a low-power ground-sense architecture, one amplifier circuit, low-voltage operation, and low supply-current demand. Before finalizing the design, confirm input common-mode range, offset, noise, output swing, and bandwidth against the ROHM datasheet for the shunt impedance and current range.
When should I choose LMR821G-GTR over another ground-sense amplifier?
Choose the LMR821G-GTR when a compact, one-circuit, low-voltage ground-sense amplifier in the 5-SSOP package matches your design constraints. The device is particularly relevant when low supply-current operation is more important than using a dual or quad amplifier. An alternative should be selected only after its complete pinout, common-mode range, offset, noise, bandwidth, and stability have been compared with the original circuit requirements.
Can another 5-SSOP amplifier replace LMR821G-GTR?
A 5-SSOP package alone does not guarantee that another amplifier can replace the LMR821G-GTR. A valid drop-in replacement must match the terminal assignments and electrical behavior needed by the PCB, including supply range, input common-mode limits, output swing, stability, offset, noise, and bandwidth. Verify the replacement against the ROHM datasheet and the original application circuit before treating it as a drop-in part.
What is the best drop-in replacement for LMR821G-GTR?
No drop-in replacement for the LMR821G-GTR can be confirmed from the available cross-reference results because they contain search tools rather than verified substitute part numbers and pin mappings. A valid replacement requires exact 5-SSOP pin compatibility and suitable electrical performance. Use the manufacturer pin table and datasheet to validate any candidate, then request a quote for the approved ordering code rather than relying on package similarity alone.
What can replace LMR821G-GTR?
A potential replacement for the LMR821G-GTR must use a compatible 5-SSOP footprint and reproduce the functions of every connected pin. Engineers should compare supply voltage, low-side input range, output swing, offset voltage, input bias current, noise, gain-bandwidth product, slew rate, and unity-gain stability. No specific substitute is listed here because the available cross-reference pages do not identify a verified pin-compatible equivalent.
Is LMR821G-GTR the same as a generic ground-sense op amp?
The LMR821G-GTR is not interchangeable with every ground-sense operational amplifier simply because both perform the same broad function. It is a specific one-circuit, 5-SSOP device optimized by ROHM for low-voltage and low-supply-current operation. Exact equivalence depends on terminal assignments and electrical limits, so compare the manufacturer specifications for the proposed substitute against the LMR821G application requirements.
What are the key specifications of LMR821G-GTR that engineers should know?
The confirmed core characteristics of the LMR821G-GTR are one amplifier circuit, low-voltage operation, low supply-current demand, ground-sense positioning, and a 5-SSOP package identified as SC-74A or SOT-753. According to the ROHM product page, the device integrates a single operational amplifier on one chip. Detailed voltage, accuracy, noise, bandwidth, slew-rate, and temperature limits must be selected from the manufacturer datasheet for final circuit calculations.
What are the best cross-brand equivalents for LMR821G-GTR?
No cross-brand equivalent for the LMR821G-GTR is confirmed by the available substitute-search results because they do not identify a candidate MPN, package, and pin map. A credible cross-brand equivalent must retain the 5-SSOP footprint, provide the required low-side input range, support the intended supply voltage, and maintain acceptable offset, noise, bandwidth, output swing, and stability. Validate each candidate against the ROHM datasheet before PCB reuse.

工程参考数据: LMR821G-GTR ——对比、设计指导和合规信息。

选型指南

The LMR821G-GTR is the appropriate choice when the design needs one ground-referenced amplifier operating from a low-voltage, low-power supply in a compact 5-SSOP package. It is especially relevant to low-side current measurement, portable sensing, battery monitoring, and dedicated industrial signal-conditioning channels. Select it only after confirming that the input common-mode range, output swing, offset, bias current, noise, bandwidth, and slew rate satisfy the circuit. No verified drop-in alternative is identified here, so do not substitute a similarly packaged amplifier without checking every pin and electrical limit. For dual- or quad-channel designs, a multi-amplifier device may reduce package count, but that would be a different architecture rather than a direct replacement. For applications requiring rail-to-rail inputs, wider bandwidth, lower offset, or higher output current, compare those requirements explicitly against the manufacturer specification before releasing the design.

与替代料对比

参数 本产品
Brand ROHM Semiconductor
Package 5-SSOP, SC-74A, SOT-753
Product Type Ground-sense operational amplifier
Amplifier Configuration 1 circuit
Operating Class Standard (general purpose)

设计说明

Use the manufacturer pin-description table to assign PCB tracks, and keep the five-SSOP footprint geometry consistent with the SC-74A or SOT-753 package drawing. Place input, output, supply, and ground connections so the low-level differential input path is not forced to share a long trace with a switching or high-current return. A short, direct input route reduces susceptibility to coupling and helps preserve the benefit of the ground-sense architecture.

Separate the sensitive input node from power-converter switches, inductors, and fast digital edges. If the LMR821G-GTR senses a low-side shunt, return the amplifier reference current through a low-impedance path associated with the shunt rather than allowing unrelated ground currents to add to the measured voltage. Ground separation must still preserve a common reference, so model both measurement accuracy and ground bounce before finalizing the board layout.

Confirm the minimum supply voltage, quiescent current, input common-mode range, and output swing from the ROHM datasheet before setting the operating point. The device's low-power and low-voltage positioning does not by itself guarantee operation throughout a battery-discharge range. Add local supply bypass near the amplifier and include the amplifier's contribution in the complete power budget, especially for continuously enabled portable or industrial monitoring systems.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for the exact LMR821G-GTR.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LMR821G-GTR LMR821G-GTR datasheet LMR821G-GTR datasheet pdf LMR821G-GTR pinout LMR821G-GTR equivalent LMR821G-GTR replacement LMR821G-GTR cross reference LMR821G-GTR price LMR821G-GTR stock ROHM LMR821G-GTR LMR821G 5-SSOP amplifier LMR821G ground sense op amp

相关元器件 & 术语

ROHM Semiconductor LMR821G-GTR LMR821G operational amplifier ground-sense operational amplifier analog integrated circuit semiconductor single-circuit amplifier low-side current sensing signal conditioning battery monitoring portable instrumentation industrial process measurement low-voltage operation low supply current common-mode voltage input offset voltage gain-bandwidth product slew rate 5-SSOP SC-74A SOT-753 surface mount current shunt
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情