LPC11E11FHN33/101 - 50MHz Arm Cortex-M0 MCU | NXP
料号: LPC11E11FHN33/101 ✓ 量产中LPC11E11FHN33/101 概述
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one package. The LPC11E1x family belongs to the ARM Cortex-M0 > 32-bit microcontroller > embedded processor > semiconductor hierarchy. Designed for cost-sensitive applications that replace 8-bit and 16-bit devices, it combines a simple instruction set, reduced code size, and low-power operation without requiring an external memory interface.
Key features include a 50 MHz maximum CPU frequency, 8 KB flash for firmware, 4 KB SRAM for working data, and 512 bytes of EEPROM for nonvolatile parameters. The device provides 28 I/O pins and uses an internal oscillator, allowing a compact implementation with fewer external support components. Its 32-HVQFN package also reduces board area compared with leaded packages, although the exposed pad and fine-pitch land pattern require careful PCB layout.
The LPC11E1x architecture combines a 32-bit Arm Cortex-M0 processor with low-cost integrated resources suitable for simple control systems. Its family description identifies scalable entry-level devices operating on Cortex-M0 or Cortex-M0+ cores at frequencies up to 50 MHz. Peripheral support includes communication-oriented functions such as USART, while the 28 available I/O pins allow digital sensors, switches, indicators, and actuators to be connected without a large external interface.
Typical applications include industrial sensor nodes, compact motor and valve controllers, building equipment interfaces, low-power IoT endpoints, LED control systems, and small appliance controllers. It is particularly suitable when 8 KB of flash and 4 KB of SRAM are sufficient but a more capable 32-bit processor, removable logic, or UART connectivity is desired. The target MPN is supplied in tray packaging according to its ordering information.
For PCB implementation, assign every package pin from the manufacturer's pin-description table and preserve the exposed-pad connection specified by the land pattern. Place decoupling capacitors close to the supply pins and route high-current outputs away from sensitive analog or communication traces. Confirm oscillator, reset, programming, and peripheral settings in the device configuration before releasing the design for production.
This page consolidates the verified device specifications, package information, family-level comparisons, sourcing fields, and practical integration guidance. It also distinguishes documented electrical characteristics from parameters that still require confirmation against the manufacturer datasheet, helping engineers evaluate the LPC11E11FHN33/101 before board-level design begins.
直接替换替代料: LPC11E11FHN33/101 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LPC11E11FHN33/101 (相同外形与封装尺寸) ——差异在于 Package, Product Type, SRAM.
该产品暂无直接替换替代料。
请求替代料LPC11E11FHN33/101 最大额定值与电气特性
| Product Type | 32-bit microcontroller (MCU) |
| Processor Core | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 8 KB (8K x 8) |
| SRAM | 4 KB (4K x 8) |
| EEPROM | 512 bytes |
| Number of I/O Pins | 28 |
| 封装 | 32-HVQFN (7x7 mm) with exposed pad |
| Oscillator Type | Internal |
| Packaging | Tray |
| Architecture | ARM Cortex-M0/M0+ scalable entry-level MCU family |
| 接口 | USART |
| Program Memory Type | Flash |
LPC11E11FHN33/101 32-hvqfn (7x7 mm) with exposed pad 引脚配置指南
LPC11E11FHN33/101(32-hvqfn (7x7 mm) with exposed pad 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: LPC11E11FHN33/101.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LPC11E11FHN33/101 适用于 6 应用s: Industrial Sensor and Condition Monitoring, Low-Power IoT Endpoint Control, Compact Motor and Valve Controller, Building Equipment Interface Module, LED Lighting Control, Small Appliance and Embedded Control.
Industrial Sensor and Condition Monitoring
The LPC11E11FHN33/101 fits compact sensor nodes that collect digital measurements and forward status data through USART. Its Arm Cortex-M0 core operates at up to 50 MHz, while 8 KB of flash can hold the application firmware and 4 KB of SRAM provides working space for sampling and control state. The 28 I/O pins support digital sensors, switches, and local indicators without requiring an external memory bus. The internal oscillator reduces external component count when its accuracy is sufficient for the measurement task. For production equipment, verify the required temperature range, EMC behavior, and qualification level before release. Use the manufacturer pin table to assign communications, debug, and unused I/O functions on the 32-HVQFN layout.
推荐
Low-Power IoT Endpoint Control
The LPC11E11FHN33/101 is suitable for low-power IoT endpoints that perform local control before transferring information over a serial link. The Cortex-M0 processor provides 32-bit execution at up to 50 MHz, while 4 KB of SRAM supports modest protocol buffers and 8 KB of flash accommodates compact firmware. Its 28 I/O pins can operate relays, indicators, or digital sensors, and USART provides a straightforward connection to a communications module. The internal oscillator helps minimize board area. The design must remain within the exact memory budget and should use low-power operating modes only after their wake-up behavior has been checked in the datasheet. A transistor driver or interface IC may be required for loads that exceed GPIO limits.
推荐
Compact Motor and Valve Controller
The LPC11E11FHN33/101 can serve as the supervisory controller in a small motor, valve, or actuator module where control logic must coexist with limited board space. Its 50 MHz Arm Cortex-M0 core can execute deterministic state-machine tasks, and its 28 I/O pins provide control signals, switch inputs, and status outputs. The 4 KB of SRAM is adequate for compact command and motion-state structures when the workload is deliberately bounded. Use timer and peripheral assignments from the manufacturer documentation, and add suitable transistor or gate-driver circuitry for inductive and high-current loads. The exposed pad requires a properly designed thermal path under sustained switching activity. Validate timing, output current, and protection requirements against the complete electrical characteristics before fabrication.
推荐
Building Equipment Interface Module
The LPC11E11FHN33/101 fits building-equipment interface modules that translate switch activity or sensor inputs into a central control message. Its 28 I/O pins provide ample digital connectivity for contact inputs, alarm outputs, and status LEDs, while USART supports communication with a room controller or service interface. At up to 50 MHz, the Cortex-M0 core provides more headroom than a basic 8-bit controller without requiring the memory footprint of a higher-end MCU. The 8 KB flash limit favors concise firmware and a well-structured bootloader. For isolated, low-voltage building wiring, add the appropriate protection network and galvanic isolation rather than routing external wiring directly to GPIO. Confirm operating-temperature and regulatory requirements for the intended installation environment.
推荐
LED Lighting Control
The LPC11E11FHN33/101 is appropriate for compact LED controllers that implement lighting sequences, button logic, status reporting, and local dimming decisions. Its 28 I/O pins allow multiple channels and control signals, while the 50 MHz processor supports timing tasks and communication handling. The device's 8 KB flash and 4 KB SRAM are suitable for a focused lighting state machine, not a large graphical user interface. A dedicated LED driver or constant-current stage should handle the light load, while the microcontroller controls enable, dimming commands, and fault inputs. Keep sensitive PWM or analog timing traces short and isolate high-current LED paths from digital signals. Validate the controller's PWM resolution, update rate, and maximum channel count against the application requirements.
推荐
Small Appliance and Embedded Control
The LPC11E11FHN33/101 can replace an 8-bit controller in a small appliance or embedded system requiring 32-bit logic, more GPIO, and serial diagnostics. Its 8 KB flash stores focused control code, 4 KB of SRAM handles intermediate data, and the 50 MHz Arm Cortex-M0 core improves responsiveness for multitasking-style firmware. The 32-HVQFN package reduces occupied PCB area in a densely populated appliance controller, although fine-pitch assembly and exposed-pad soldering require disciplined PCB design. Use USART for service logging or an external module, and route motor, heater, and mains-adjacent interfaces through rated protection circuits. Confirm reset behavior, brownout requirements, operating temperature, and appliance safety requirements before production release.
推荐
推荐产品汇总
工程参考数据: LPC11E11FHN33/101 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LPC1111FHN33 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (7x7 mm) with exposed pad | 32-HVQFN family package; verify exact drawing |
| Processor Core | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
关键差异点
- Provides EEPROM alongside flash and SRAM (对比 LPC1111FHN33)
- Uses a compact 7x7 mm leadless package (对比 LPC1111FHN33)
- Combines 28 I/O pins with a 50 MHz Cortex-M0 core (对比 LPC1111FHN33)
设计说明
Use the manufacturer's 32-HVQFN land pattern and exposed-pad geometry rather than treating the package as a generic 32-pin QFN. Connect the exposed pad to the intended thermal and electrical plane, keep signal routing away from the pad perimeter where practical, and define paste apertures and solder-mask openings from the official package drawing. Fine-pitch soldering also benefits from a consistent assembly process because bridged outer leads can create intermittent faults that are difficult to diagnose.
Place the required supply decoupling capacitance immediately adjacent to the device power pins, with a short and low-inductance return path to the ground or plane reference specified in the datasheet. Separate sensitive communication traces from switching or high-current actuator paths. Do not infer the allowable supply range or decoupling value from the family description; confirm both in the manufacturer electrical-characteristics and application-information sections before releasing the schematic.
Firmware sizing must include startup code, interrupt handlers, protocol stacks, and application logic, not only the main control routine. The LPC11E11FHN33/101 has 8 KB of flash and 4 KB of SRAM, so monitor code growth and stack use from the beginning. Avoid assuming that software written for the related LPC1111FHN33 will run unchanged because peripheral registers, pin multiplexing, clock initialization, and interrupt layouts may differ between families.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this exact ordering code. Confirm current compliance documents with the manufacturer before procurement.