LT1016CP - 10ns UltraFast Comparator | Analog Devices
料号： LT1016CP ✓ 量产中LT1016CP 概述
An analog comparator is an integrated circuit that compares two input voltages and changes its output state when one input becomes higher than the other. Within the broader semiconductor hierarchy, the LT1016 belongs to the comparator class of amplifier and signal-conditioning ICs. Its speed makes it useful wherever a digital system must react to an analog threshold event with minimal delay.
Key features include a 10 ns propagation response, tight input-offset specifications, high gain, and active output drive in both logic directions. The device can operate with positive and negative supplies or with a single 5 V rail when the negative supply is generated externally. A latch input retains the comparison result, while matched complementary outputs support complementary clock, edge-detection, and pulse-shaping circuits.
The LT1016 uses active bipolar circuitry designed for fast decision-making rather than precision amplification. Its positive and negative input nodes connect directly to the comparison element, and the output stage interfaces with TTL or CMOS logic. The manufacturer datasheet also identifies a quiescent negative-supply current of 3 mA, allowing the negative rail to be produced through a simple resistive divider when only a 5 V supply is available.
Typical applications include high-speed threshold detection, zero-crossing detection, pulse-width generation, overvoltage and undervoltage signaling, window comparators, and propagation-delay measurement. The 10 ns response is particularly useful in instrumentation, industrial control, communications, and test systems where the digital output must follow an analog input transition with little delay.
When laying out a circuit, keep the comparator inputs and output traces short, provide stable bypassing for the supply pins, and account for input overdrive and output loading. The relatively fast response can magnify noise near the decision threshold, so input filtering and careful grounding can be as important as device selection.
This page combines the manufacturer's core operating information with practical placement guidance, application context, and a structured comparison framework. These engineering-focused details help shorten evaluation time while preserving the distinction between electrical equivalence and a true board-level drop-in replacement.
直接替换替代料： LT1016CP ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料LT1016CP 最大额定值与电气特性
| Product Type | UltraFast precision comparator |
| Propagation Delay | 10 ns |
| Maximum Input Offset Voltage | 3.5 mV |
| Positive Supply Voltage | +5 V |
| Negative Supply Voltage | -5 V |
| Single-Supply Operation | 5 V |
| Quiescent Negative Supply Current | 3 mA |
| 输出类型 | Matched complementary outputs |
| Logic Compatibility | TTL and CMOS |
| Output Drive | Active drive in both directions |
| Latch Function | Retains input data at the outputs when held high |
| Input Offset Characteristics | Tight offset voltage specifications |
| Voltage Gain | High gain |
| 封装 | PDIP-8 |
| 安装类型 | Through-hole |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | Not applicable |
| Operating Supply Configuration | ±5 V or single 5 V |
LT1016CP pdip-8 引脚配置指南
LT1016CP（pdip-8 封装）的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据： LT1016CP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LT1016CP 适用于 6 应用s: High-Speed Pulse-Width Measurement, Zero-Crossing Detection, Fast Overvoltage Signaling, Window Comparator Monitoring, Pulse Generator and Edge Conditioning, High-Speed Test and Measurement.
High-Speed Pulse-Width Measurement
The LT1016CP fits pulse-width measurement because its 10 ns response reduces the uncertainty associated with detecting a threshold crossing. Place it at the intersection of the signal under test and a stable reference to generate an event that marks the measured interval. The matched complementary outputs can drive timing logic directly, while the latch input can preserve a captured event. Short input paths and a low-noise reference are important because the fast transition can amplify small changes in threshold voltage.
推荐
Zero-Crossing Detection
The LT1016CP is appropriate for detecting a signal crossing a chosen threshold with a 10 ns response time. Bias a fast signal near the comparison threshold and use the complementary outputs to produce positive or negative edge events as the waveform moves in either direction. In instrumentation or communications equipment, this can simplify edge generation, phase measurement, and trigger conditioning. Input overdrive and threshold stability should be evaluated because the high-speed output responds quickly to both signal transitions and noise.
推荐
Fast Overvoltage Signaling
The LT1016CP can convert an analog supervisory signal into a rapid digital fault indication when a monitored rail crosses a reference threshold. Its maximum input offset voltage of 3.5 mV supports precision comparison, while the 10 ns response minimizes delay before downstream protection logic reacts. Place the comparator close to the protected rail and reference network, bypass the supply pins locally, and account for input current when selecting divider resistors for high-impedance sensing nodes.
推荐
Window Comparator Monitoring
Two LT1016CP devices can be arranged to monitor upper and lower limits of an analog signal, producing complementary status outputs when the monitored value moves outside an acceptable window. The 10 ns response allows the system to react quickly to transients that would be missed by a slower comparator. Use matched divider networks for the upper and lower thresholds and route the two outputs into consistent logic polarity. Supply bypassing and reference-decoupling should be shared carefully to maintain repeatable threshold behavior.
推荐
Pulse Generator and Edge Conditioning
The LT1016CP can shape a narrow event into complementary digital pulses by comparing an analog excursion with a reference threshold. Its 10 ns response preserves short pulses and provides edges suitable for downstream TTL or CMOS logic. The latch function can extend or hold an event when downstream timing requires a longer valid interval. Component tolerances and input noise directly affect pulse width, so the reference network should be stable and the comparison traces should remain compact.
推荐
High-Speed Test and Measurement
The LT1016CP is useful in test equipment that must detect threshold crossings with limited timing uncertainty. Its high gain, tight offset voltage, and 10 ns response support comparisons involving small analog signals or rapidly changing waveforms. Matched complementary outputs can simplify differential clock generation and improve drive into digital acquisition logic. For accurate results, calibrate the reference threshold, minimize input capacitance, maintain a quiet return path, and evaluate probe loading separately from the comparator’s propagation behavior.
推荐
推荐产品汇总
工程参考数据： LT1016CP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Analog Devices |
| Package | PDIP-8 |
| Product Type | UltraFast precision comparator |
| Propagation Delay | 10 ns |
| Maximum Input Offset Voltage | 3.5 mV |
| Supply Configuration | ±5 V or single 5 V |
| Logic Compatibility | TTL and CMOS |
| Output Configuration | Matched complementary outputs with active drive in both directions |
| Latch Function | Yes |
| Quiescent Negative Supply Current | 3 mA |
关键差异点
- Ultra-fast threshold response （对比 No verified drop-in alternative)
- Precision input comparison （对比 No verified drop-in alternative)
- Direct complementary logic drive （对比 No verified drop-in alternative)
- Event-hold capability （对比 No verified drop-in alternative)
设计说明
Route the two inputs and complementary outputs as short, compact traces, particularly when the compared signal has fast edges. Minimize parasitic capacitance on the high-impedance input node because input transients coupled into the comparison threshold can create output jitter. Keep the input pair away from clocks, inductors, and switching-node copper, and maintain a continuous return path beneath or adjacent to the signal route.
Bypass the supply pins locally with the capacitance recommended by the manufacturer application guidance. For a single 5 V implementation, create the negative supply with a stable divider or low-noise supply arrangement; the manufacturer specifies 3 mA quiescent negative-supply current and states that performance is not affected by variations in negative supply voltage. Check the divider’s interaction with input and output currents before finalizing resistor values.
Do not equate a fast comparator with a low-noise comparator. The 10 ns response can make output transitions sensitive to small signals near the threshold, so use a stable reference and consider filtering unwanted high-frequency noise. Also verify output polarity before connecting to logic, because the LT1016 provides matched complementary outputs and an incorrect assignment can invert the intended system behavior.
The 10 ns propagation response implies that even a few nanoseconds of interconnect difference can matter in precise timing measurements. Use a symmetric comparison network where possible, keep the threshold reference quiet, and avoid long stubs. When measuring propagation delay, include the external threshold network, probe loading, and receiver delay rather than attributing the entire measurement to the comparator alone.
合规信息
The manufacturer product page and datasheet do not establish the requested environmental, automotive, or material-compliance status. The device is not an automotive-qualified comparator.