Microchip Technology

M2GL050-FGG896I - 56K LEs, 896-BGA Flash FPGA | Microchip

料号: M2GL050-FGG896I ✓ 量产中
896-BGA Package Flash Memory
最小起订量: 1 |

M2GL050-FGG896I 概述

The Microchip Technology M2GL050-FGG896I is a low-density IGLOO2 flash field-programmable gate array with 56K logic elements, presented in a square 896-ball BGA package and graded for industrial applications. It combines programmable logic, embedded block RAM, and programmable I/O in a single monolithic FPGA, making it suitable for general-purpose bridging, I/O expansion, signal conversion, system management, and secure connectivity functions.

A field-programmable gate array is a semiconductor whose digital logic and I/O are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside complex programmable logic devices and system-on-chip devices. Compared with a fixed application-specific integrated circuit, an FPGA can implement protocols, control logic, and interface functions in parallel hardware while allowing field updates without replacing the component.

The M2GL050 device is identified as an IGLOO2 low-density FPGA with 56K logic elements. Its 896-ball BGA interface provides a substantial number of package connections for high pin-count designs, while its flash-based configuration architecture supports nonvolatile programmable behavior. The industrial grade suffix indicates use in industrial temperature environments. The product family is specifically positioned for communications, industrial, and embedded applications requiring programmable logic rather than fixed control hardware.

The key engineering benefit is implementation flexibility. Parallel logic resources can perform bridging, data conversion, packet handling, and peripheral control concurrently, reducing the need for several discrete logic devices. Designers can also revise the configuration during development without changing the PCB. The tradeoff is that FPGA designs require constraint definition, timing analysis, programming support, and careful BGA-layout planning rather than only conventional discrete-component assembly.

Typical applications include industrial communications adapters, programmable I/O expansion, legacy-interface bridges, protocol converters, embedded control modules, and secure system-management or connectivity functions. The 896-BGA footprint is especially relevant where the design needs many high-speed or parallel I/O connections and can accommodate demanding escape-routing and assembly requirements.

For implementation, use the Microchip Libero design flow and the device-specific pin constraints and package information. Place the FPGA according to the recommended land pattern, provide clean power and ground distribution, and complete signal-integrity and thermal validation on the assembled board. Confirm the exact pin, voltage, and timing requirements in the manufacturer datasheet before schematic release.

This page combines the M2GL050 family position, package and logic details with direct drop-in substitution guidance and practical implementation considerations. It highlights the M2GL050-FGG896I for designers who need an industrial-grade, flash-based IGLOO2 FPGA in a high-pin-count 896-BGA package.

直接替换替代料: M2GL050-FGG896I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: M2GL050-FGG896I (相同外形与封装尺寸) ——差异在于 Configuration Memory, Logic Elements.

Microchip Technology
Configuration Memory: Fourth-generation flash-based FPGA fabric (non-volatile configuration)
Logic Elements: 56,340 LE
对比 M2GL050-FGG896I →

M2GL050TS-FGG896I

✅ 直接替换
📦 896-BGA
Retains the 56K-LE IGLOO2 architecture and 896-ball FGG896 package with 0% stated logic-capacity difference, but is identified as not recommended for new designs and directs users to M2GL060.

📋 参考替代料(不在目录中)

M2GL050-FGG896I 最大额定值与电气特性

Product Type Flash Field-Programmable Gate Array
FPGA Family IGLOO2
Density Classification Low Density
Logic Elements 56K LEs
Configuration Memory Flash
Package Type 896-BGA
Package Shape Square
Terminal Form Ball
Number of Terminals 896 balls
Temperature Grade Industrial
安装类型 Surface Mount

M2GL050-FGG896I square 引脚配置指南

M2GL050-FGG896I(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

M2GL050-FGG896I 的 square 封装引脚图

暂无详细引脚数据: M2GL050-FGG896I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

M2GL050-FGG896I 适用于 6 应用s: Industrial Communications Bridging, Programmable I/O Expansion, Legacy Interface Conversion, Embedded System Management, Secure Connectivity Control, Programmable Test and Control.

🏭

Industrial Communications Bridging

The M2GL050-FGG896I fits industrial communication bridging because its 56K logic elements can implement multiple parallel protocol and data-transfer functions in one programmable device. The IGLOO2 flash architecture retains the configuration without requiring a separate volatile configuration load at every power cycle. Its 896-ball BGA package exposes a high connection count for interfaces carrying multiple buses or signals. Designers can use the same FPGA family to consolidate protocol conversion, status monitoring, and supervisory logic while shortening the path between input, processing, and output stages. Final interface rates, voltage levels, and timing margins must be validated against the selected I/O standards and the manufacturer device constraints.

🔧

Programmable I/O Expansion

The M2GL050-FGG896I is appropriate for programmable I/O expansion because 56K logic elements can add buffering, level conversion control, multiplexing, and status logic around existing processors. Its 896-ball BGA package provides many physical connections, which is advantageous when an expansion card needs numerous parallel data, control, and grounds rather than a few serial signals. The flash FPGA also allows the expansion function to be revised through a configuration update without changing the board layout. Engineers should assign pins according to the device package constraints, preserve adequate power and ground connectivity, and verify every newly added interface against the supported voltage and timing characteristics.

🌐

Legacy Interface Conversion

M2GL050-FGG896I can implement legacy-interface conversion in parallel hardware, including parallel-to-serial arrangement, framing, and protocol translation functions. The 56K-LE IGLOO2 architecture provides enough programmable logic for coordinated conversion and control functions without requiring a separate processor for every data path. Its 896-ball package supports designs that need substantial I/O fan-out while maintaining a single IC footprint on the board. The main engineering benefit is field-update flexibility: protocol logic can be revised in the flash configuration while the PCB remains unchanged. Before implementation, confirm the required I/O standards, impedance, voltage domains, and timing relationships using the device and package documentation.

🖥️

Embedded System Management

The M2GL050-FGG896I supports embedded system-management functions such as sequencing, supervisory control, fault monitoring, and configuration coordination because programmable logic can implement these tasks in parallel with a host processor. Its 56K logic elements allow multiple monitoring paths to operate concurrently, while flash configuration provides a stable control implementation across power cycles. The 896-ball BGA package is useful where the management subsystem requires many discrete I/O, such as reset, enables, interlocks, and status reporting. Designers should partition I/O into compatible voltage domains, use the package-aware constraints when assigning balls, and validate reset behavior and clock distribution during hardware bring-up.

🔒

Secure Connectivity Control

M2GL050-FGG896I is suitable for secure-connectivity control functions that combine protocol handling, packet filtering, key-related control, and physical-interface logic. The 56K-LE IGLOO2 device allows data paths to operate concurrently instead of forcing traffic through a sequential processor loop, and its flash-based architecture simplifies deterministic startup behavior. The 896-ball package offers substantial connectivity for multi-bus secure gateways, test equipment, and communications modules. Security mechanisms, supported cryptographic functions, and platform certification requirements must be reviewed separately for the selected design. PCB implementation should focus on controlled clocking, clean supply distribution, and signal-integrity validation on every externally exposed interface.

🔬

Programmable Test and Control

The M2GL050-FGG896I can serve as the programmable control core in automated test, instrumentation, and board-level verification systems. Its 56K logic elements allow pattern generation, sequencing, acquisition control, and fault handling to run concurrently, while the 896-ball BGA package supports a large number of test points and control connections. Flash configuration permits repeatable setup of a test sequence and supports firmware or configuration revision during development. The principal constraints are package complexity, routing density, and the need for disciplined power, ground, and clock distribution. Prototype assemblies should be checked for BGA solder-joint reliability and signal margins before the design enters volume production.

推荐产品汇总

M2GL050TS-FGG896I Same-family 896-BGA alternate for an existing design 用于: Industrial Communications Bridging, Legacy Interface Conversion, Secure Connectivity Control, Programmable Test and Control M2GL050-1VF400 Microchip Technology 用于: Industrial Communications Bridging, Legacy Interface Conversion, Secure Connectivity Control, Programmable Test and Control M2GL050-1FCS325I IGLOO2 family member for alternate package configurations 用于: Programmable I/O Expansion, Embedded System Management M2GL050TS-1FGG484I IGLOO2 family member for smaller I/O expansion designs 用于: Programmable I/O Expansion, Embedded System Management
What is M2GL050-FGG896I?
The M2GL050-FGG896I is a Microchip IGLOO2 flash FPGA with 56K logic elements in an industrial-grade 896-ball BGA package. According to the Microchip M2GL050 product page, the family targets general-purpose bridging, I/O expansion, conversion, system-management, and secure-connectivity functions. Its flash configuration supports nonvolatile programmable logic, while the 896-ball package provides a high connection count for communications and embedded systems.
How many logic elements does M2GL050-FGG896I have?
The M2GL050-FGG896I contains 56K logic elements. The Mouser product listing identifies M2GL050-FGG896I as an IGLOO2 low-density FPGA with 56K LEs, and the manufacturer places the M2GL050 family in general-purpose communications and industrial applications. Use the 56K LE figure as the primary programmable-logic capacity indication, and consult the device datasheet for the corresponding LUT, register, memory, and I/O counts.
What package does M2GL050-FGG896I use?
The M2GL050-FGG896I uses a square 896-ball BGA package. The exact device listing states 896 terminals, ball termination, BGA package code, and square package shape. According to the manufacturer M2GL050 family page, Microchip positions the series for general-purpose programmable functions. BGA assembly requires exact land-pattern, paste-mask, stencil, and reflow control.
Where can I download the M2GL050-FGG896I datasheet?
The official M2GL050 datasheet and supporting documentation are available through the Microchip M2GL050 product page. The manufacturer describes the M2GL050 as an IGLOO2 flash FPGA for bridging, I/O expansion, conversion, system management, and secure connectivity. Begin with the family datasheet, then use the device-specific package and pin documentation when defining the 896-ball land pattern and PCB constraints.
Where is the M2GL050-FGG896I pinout?
The M2GL050-FGG896I pinout is documented in the Microchip device package information associated with the M2GL050 family. The manufacturer product page is the appropriate starting point for the 896-BGA package details and associated documentation. Use the package pinout, recommended footprint, and board-constraint files together rather than inferring ball assignments from another M2GL050 package.
What can replace M2GL050-FGG896I?
M2GL050TS-FGG896I is the closest identified same-package replacement because it retains the IGLOO2 56K-LE device and FGG896 896-BGA package. Its notable trade-off is lifecycle status: Microchip’s distributor listing marks M2GL050TS-FGG896I as not recommended for new designs and directs users toward M2GL060. Verify electrical, timing, pin, and programming compatibility against the manufacturer documents before substitution.
Is M2GL050TS-FGG896I a drop-in replacement for M2GL050-FGG896I?
M2GL050TS-FGG896I is a candidate drop-in replacement because it uses the same 896-ball FGG896 package and is identified within the same 56K-LE IGLOO2 family. The replacement has a lifecycle disadvantage because its manufacturer listing says it is not recommended for new designs. The exact suffix behavior, temperature grade, and timing or configuration compatibility must be checked in the datasheets before production use.
What is the best equivalent for M2GL050-FGG896I?
No fully documented cross-manufacturer drop-in equivalent was identified for the M2GL050-FGG896I, so M2GL050TS-FGG896I is the nearest same-brand candidate. The target has 56K logic elements and a 896-ball BGA footprint, making an equivalent require matching package balls, supported I/O standards, voltage limits, timing, configuration method, and software-device support. Use the Microchip cross-reference search for additional family-level options.
M2GL050-FGG896I vs M2GL050TS-FGG896I: which is better for a new design?
M2GL050-FGG896I is the better starting point for a new design because the manufacturer’s M2GL050 family remains positioned as active, while M2GL050TS-FGG896I is identified as not recommended for new designs. Both are associated with the 56K-LE IGLOO2 family and FGG896 896-BGA package. The decisive checks remain device suffix, temperature grade, timing, and configuration compatibility.
When should I choose M2GL050-FGG896I over M2GL050TS-FGG896I?
Choose M2GL050-FGG896I when starting a new industrial design that specifically requires a 56K-LE IGLOO2 FPGA in the 896-ball FGG896 package and has an active product path. Choose M2GL050TS-FGG896I mainly when an existing board requires that exact replacement and its datasheet confirms compatibility. The suffix-marked candidate is not recommended for new designs.
Is M2GL050-FGG896I suitable for industrial communication designs?
The M2GL050-FGG896I is suitable for industrial communication designs that need programmable bridging, I/O expansion, conversion, or system-management functions. Its industrial temperature grade, 56K logic elements, and 896-ball BGA package support dense interface-heavy implementations. The Microchip M2GL050 family page specifically identifies communications and industrial use as target markets.
Where can I buy M2GL050-FGG896I and what is its price?
Use the Request a Quote form on this page to request M2GL050-FGG896I availability, current pricing, and lead time. The part is an industrial-grade 56K-LE IGLOO2 flash FPGA in an 896-ball BGA package. A quote request also lets the sourcing team confirm the required package suffix, assembly configuration, quantity, and production schedule for your specific build.
What is the lead time for M2GL050-FGG896I?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on order quantity, package configuration, production scheduling, and supply status, so it should be confirmed for the exact M2GL050-FGG896I and your delivery schedule. The manufacturer product page identifies the M2GL050 family for communications and industrial applications.
Is M2GL050-FGG896I in stock?
Submit an M2GL050-FGG896I request through the Request a Quote form on this page to confirm current availability for your required quantity. The part is a 56K-LE IGLOO2 flash FPGA in an industrial-grade 896-ball BGA package. Because inventory changes across exact suffix and assembly configurations, the quote team should confirm stock against the complete manufacturer part number.
What are the key specifications engineers should know about M2GL050-FGG896I?
The key M2GL050-FGG896I specifications are 56K logic elements, flash configuration, industrial temperature grading, and a square 896-ball BGA package with 896 terminals. According to the manufacturer product page and distributor device records, the IGLOO2 family supports bridging, I/O expansion, conversion, system management, and secure connectivity. Exact I/O count, voltage ranges, RAM capacity, and timing values should be taken from the device datasheet.

工程参考数据: M2GL050-FGG896I ——对比、设计指导和合规信息。

选型指南

Choose M2GL050-FGG896I for a new industrial design that requires an IGLOO2 flash FPGA with 56K logic elements and a 896-ball BGA footprint. Its large package is useful for communications bridging, I/O expansion, protocol conversion, system management, and secure-connectivity control. Choose M2GL050TS-FGG896I only for an existing design that requires the same FGG896 package and passes a full electrical, timing, temperature-grade, and configuration review; its lifecycle position is unfavorable for new development. M2GL050-1VF400 and M2GL050-1FCS325I belong to the same broad family but use different packages, so they are not drop-in choices for an 896-ball board. For any substitution, verify supported I/O standards, voltage domains, pin constraints, embedded memory, configuration method, software-device support, and the exact package drawing rather than relying on family name alone.

与替代料对比

参数 本产品 M2GL050TS-FGG896I
Package 896-BGA 896-BGA
Brand Microchip Technology Microchip Technology
FPGA Family IGLOO2 IGLOO2
Logic Elements 56K LEs 56K LEs
Package Pin Count 896 balls 896 balls
Lifecycle Guidance Active family positioning Not recommended for new designs; use M2GL060

关键差异点

  • Active family positioning for new designs (对比 M2GL050TS-FGG896I)
  • Retains the same logic capacity and package (对比 M2GL050TS-FGG896I)
  • Industrial-grade product designation (对比 M2GL050TS-FGG896I)

设计说明

Use the manufacturer’s package-specific 896-ball land pattern, solder-mask, paste-mask, and stencil recommendations rather than generating a footprint from the ball count alone. Keep escape routes short, preserve the device’s recommended power and ground distribution, and account for BGA inspection requirements. Because the target has 896 terminals, small routing errors can affect multiple interfaces, and prototype assemblies should receive dedicated solder-joint inspection.

Partition the design into the voltage domains required by the selected configuration and follow the manufacturer’s decoupling and power-isolation guidance. Place local high-frequency bypass capacitors close to the relevant supply balls, provide stable reference planes beneath the device, and avoid routing noisy or high-current paths through sensitive logic areas. Exact capacitor values, voltage tolerances, and sequencing requirements should be taken from the M2GL050 datasheet.

Assign every ball through the device-aware Libero constraints and verify timing against the actual board-level clock, trace lengths, loading, and I/O standards. The 896-BGA package offers many connections, but ball escapes and routing density can introduce coupling, crosstalk, and impedance discontinuities. Simulate the critical interfaces, maintain continuous return paths, and validate edge rates on hardware rather than relying only on schematic-level timing reports.

Do not treat M2GL050 family members as interchangeable solely because they use the IGLOO2 name. Package code, suffix, density, temperature grade, configuration method, supported I/O, and lifecycle status can differ. In particular, M2GL050TS-FGG896I is identified as not recommended for new designs, so it should not replace M2GL050-FGG896I without a documented compatibility review and an approved product-change plan.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The device is identified as industrial grade, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was confirmed. Check the current manufacturer product documentation and material declarations before production release.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

M2GL050-FGG896I datasheet M2GL050-FGG896I pinout M2GL050-FGG896I datasheet pdf M2GL050-FGG896I equivalent M2GL050-FGG896I replacement M2GL050-FGG896I footprint M2GL050-FGG896I price M2GL050-FGG896I stock Microchip M2GL050-FGG896I M2GL050-FGG896I vs M2GL050TS-FGG896I m2gl050 fgg484i m2gl050 vfg400i

相关元器件 & 术语

Microchip Technology M2GL050-FGG896I M2GL050TS-FGG896I M2GL050-1VF400 M2GL050-1FCS325I IGLOO2 FPGA field-programmable gate array flash FPGA programmable logic logic element LE embedded block RAM I/O expansion protocol conversion system management secure connectivity 896-BGA BGA ball-grid array surface-mount package industrial grade Libero RoHS REACH AEC-Q100
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情