MAX3243EIPW - 500kbps 3/5 RS-232 Transceiver | Texas Instruments
料号: MAX3243EIPW ✓ 量产中MAX3243EIPW 概述
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible logic. In the broader electronics hierarchy, the MAX3243EIPW belongs to the interface-controller family, supports the EIA/TIA-232 communications standard, and provides the physical-layer signaling required between computers, industrial controllers, instrumentation, and other serial equipment.
The device combines three driver channels and five receiver channels in one package. Its 3-to-5.5 V supply range allows operation from both 3.3 V and 5 V systems, while the 500 kbps maximum data rate supports moderate-speed point-to-point serial links. Automatic shutdown and wake-up functions can reduce supply demand when the associated receiver is inactive, and plus or minus 15 kV IEC ESD protection improves robustness on cables exposed to electrostatic discharge.
The MAX3243EIPW is a pin-compatible member of the MAX3243E interface family, and the TRS3243E designation provides a second-source ordering path for the same device. Its 28-pin TSSOP package is substantially smaller than the older 28-pin DIP representation and supports compact PCB construction. The industrial temperature grade covers minus 40°C to plus 85°C operation, making the device suitable for factory equipment, data acquisition systems, service interfaces, and embedded serial ports.
Typical applications include industrial control consoles, laboratory test equipment, point-of-sale terminals, security systems, external data-loggers, and embedded UART links. The three transmitters allow multiple outputs, while the five receivers support several incoming serial ports or multiple receive-connected inputs. The 500 kbps rate is appropriate for configuration transfers, status polling, command exchange, and short-distance industrial communication rather than continuous high-volume file transfers.
For layout, keep the IC close to the protected connector and route each RS-232 trace as a short, direct channel. Follow the manufacturer datasheet for charge-pump capacitors, driver output connections, receiver inputs, and the exact supply-bypass arrangement. Confirm signal polarity and receiver input states before enabling a channel, especially when replacing a legacy MAX3243 implementation.
This page combines the manufacturer specifications with practical transceiver application guidance, channel-count comparisons, package compatibility analysis, and design notes. These resources help engineers evaluate the MAX3243EIPW for both new RS-232 designs and existing 28-pin TSSOP board revisions.
直接替换替代料: MAX3243EIPW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3243EIPW (相同外形与封装尺寸) ——差异在于 Maximum Data Rate, Package, ESD Protection, Supply Voltage Range, Number of Drivers.
TRS3243EIPW
✅ 直接替换📋 参考替代料(不在目录中)
MAX3243CUI+
✅ 直接替换联系询价
查看数据手册 →MAX3243EIPW 规格参数
| Product Type | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| Driver Channels | 3 channels |
| Receiver Channels | 5 channels |
| Minimum Logic Voltage | 3.3 V |
| ESD Protection | plus or minus 15 kV IEC ESD protection |
| 工作温度范围 | -40°C to +85°C |
| 封装 | 28-pin TSSOP (PW) |
| 安装类型 | Surface mount |
| Shutdown Feature | Automatic shutdown and wake-up |
MAX3243EIPW 28-pin tssop (pw) 引脚配置指南
MAX3243EIPW(28-pin tssop (pw) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3243EIPW.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3243EIPW 适用于 6 应用s: Industrial Controller Serial Ports, Laboratory Test and Measurement Equipment, Point-of-Sale and Service Terminals, Security and Access-Control Equipment, Embedded Data Logger, Computer and Peripheral Legacy Interfaces.
Industrial Controller Serial Ports
The MAX3243EIPW suits industrial controllers that need several RS-232 connections on a compact board. Its three drivers and five receivers support three outbound channels and five inbound signals, while the 3-to-5.5 V supply range permits operation from either 3.3 V or 5 V control logic. The 500 kbps limit supports command polling, parameter downloads, alarm messages, and configuration transfer. Its minus 40°C to plus 85°C rating supports temperature-controlled factory equipment, while plus or minus 15 kV IEC ESD protection improves resistance to discharge on accessible cabling.
推荐
Laboratory Test and Measurement Equipment
The MAX3243EIPW can connect laboratory instruments and automated test systems that exchange commands and results over RS-232. A 500 kbps channel is useful for instrument identification, measurement requests, status responses, and limited result transfers rather than continuous high-bandwidth waveforms. Three transmitter channels and five receiver channels allow a single instrument to control several devices or monitor multiple inputs. The 28-pin TSSOP package saves board space, and the 3-to-5.5 V range supports both legacy 5 V instrument logic and modern 3.3 V control platforms.
推荐
Point-of-Sale and Service Terminals
The MAX3243EIPW fits point-of-sale terminals and service equipment requiring several legacy serial ports in a constrained enclosure. Three driver channels can address printers, scanners, customer displays, or peripheral controllers, while five receiver channels provide inputs for status lines and handheld devices. The 500 kbps maximum rate is appropriate for transaction commands, receipt data, status polling, and short diagnostic records. The 28-pin TSSOP footprint helps preserve PCB area, and automatic shutdown and wake-up functions can reduce power use when selected receiver channels are inactive.
推荐
Security and Access-Control Equipment
The MAX3243EIPW is suitable for access-control readers, alarm panels, and surveillance equipment that retain RS-232 commissioning or service interfaces. Its multiple channels allow one controller to communicate with several door stations or peripheral modules without requiring a separate transceiver per link. The 500 kbps capability accommodates identity records, event logs, configuration commands, and short firmware or log transfers. Plus or minus 15 kV IEC ESD protection is particularly relevant where service connectors enter industrial or outdoor enclosures, although cable routing and enclosure-level surge protection remain part of the system design.
推荐
Embedded Data Logger
The MAX3243EIPW can connect sensors, data loggers, and remote monitoring units that use RS-232 for configuration and event reporting. The transceiver's three transmitter channels support separate command or alert outputs, while its five receiver channels can accept data from multiple sensors or instrument ports. A 500 kbps link is suitable for sampled status data, time stamps, alarms, and periodic records when continuous high-volume streaming is not required. Its industrial temperature range and compact TSSOP package allow deployment in equipment enclosures where space, operating temperature, and cable-discharge robustness affect component selection.
推荐
Computer and Peripheral Legacy Interfaces
The MAX3243EIPW supports legacy computer and peripheral equipment that still uses RS-232 for configuration, diagnostics, or firmware communication. The three-driver and five-receiver arrangement supports several ports while limiting the number of physical interface ICs on the board. The 3-to-5.5 V supply range allows integration with both older 5 V systems and newer 3.3 V controllers. At 500 kbps, the device supports command exchanges and moderate data transfers, making it relevant for service equipment, industrial computers, and peripheral controllers that must bridge existing RS-232 infrastructure.
推荐
推荐产品汇总
工程参考数据: MAX3243EIPW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TRS3243EIPW | MAX3243CUI |
|---|---|---|---|
| Package | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) | 28-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Analog Devices |
| Minimum Logic Voltage | 3.3 V | 3.3 V | 3.3 V |
| Maximum Data Rate | 500 kbps | 500 kbps | 0.5 MBps |
| Driver Channels | 3 channels | 3 channels | 3 channels |
| Receiver Channels | 5 channels | 5 channels | 5 channels |
关键差异点
- Documented same-device second-source path (对比 TRS3243EIPW)
- Three transmitters and five receivers in one package (对比 MAX3243CUI)
- Broad logic compatibility (对比 TRS3243EIPW)
设计说明
Place the MAX3243EIPW near the RS-232 connector and route each driver and receiver channel directly to its corresponding connector pin. Keep the external charge-pump capacitor connections short and follow the manufacturer datasheet placement diagram exactly. The protected transceiver outputs should not be routed through long unprotected PCB traces before reaching the connector, because ESD performance depends on keeping the sensitive path short and providing a low-impedance return path.
Keep RS-232 signal traces away from switching-node and high-current supply paths to reduce capacitive coupling and radiated noise. Use a continuous ground reference under or beside the interface area, and connect connector shield or chassis ground according to the product's EMC strategy. Since the MAX3243EIPW supports 500 kbps, inspect the assembled board for edge-rate distortion, excessive loading, and connector return-path discontinuities rather than evaluating only the nominal baud rate.
Do not treat RS-232 as a differential pair. The driver outputs use positive and negative signal levels relative to ground, while receiver inputs are single-ended. Confirm the intended driver-to-receiver connection, logic polarity, and shutdown state before energizing the board. Also avoid substituting a part solely because it has 28 pins; verify pin names, exposed-pad requirements, charge-pump connections, shutdown behavior, and package dimensions against the manufacturer datasheet.
Decouple the 3-to-5.5 V supply at the MAX3243EIPW with the capacitance and placement specified by the manufacturer datasheet. Keep the charge-pump capacitor loop compact because long or narrow traces can increase switching transients and radiated emissions. Validate startup and shutdown behavior with the connected UART because automatic wake-up timing can affect the first communication attempt after power restoration.
合规信息
The manufacturer identifies plus or minus 15 kV IEC ESD protection, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified.