onsemi

MC14017BF - 16 MHz Decade Counter | onsemi | Logic IC

料号: MC14017BF ✓ 量产中
3 V to 18 V Vdss SOIC-16-208 mil Package 16 MHz Speed
最小起订量: 1 |

MC14017BF 概述

The onsemi MC14017BF is a five-stage Johnson decade counter with a built-in code converter, operating from a 3 V to 18 V supply in a 16-pin SOIC package. It provides a maximum operating frequency of 16 MHz, a propagation delay of 175 ns at 15 V with a 50 pF load, and ten decoded decade outputs. The counter changes state on the positive-going clock edge and supports both rising-edge and falling-edge operation as well as programmable divide ratios and cascading.

A decade counter is a sequential logic device that divides an input clock into ten decoded states. The MC14017BF family combines a five-stage Johnson counter with a decoder, producing one active output for each count from zero through nine. This structure places the MC14017BF in the logic IC hierarchy as a counter and divider within digital semiconductor and clock-control applications.

Its principal characteristics include a 3 V to 18 V operating range, a 16 MHz maximum frequency, and a -55 °C to +125 °C temperature range. The Johnson-counter architecture is designed for high-speed operation and spike-free decoded outputs. The SOIC-16-208 mil package supports conventional surface-mount assembly while providing access to the clock, reset, carry, supply, ground, and decoded output functions.

The MC14017BF is useful when a system needs to divide a frequency into ten discrete periods, count repetitive events, sequence multiple operations, or create programmable timing intervals. Its carry output enables frequency division beyond ten, allowing several counters to be cascaded. Falling-edge clock operation also makes it suitable for systems in which the triggering signal changes on the falling transition.

Typical uses include industrial decade and event counters, clock and frequency dividers, programmable timing modules, sequencing controllers, and test equipment. In a cascaded arrangement, each additional stage extends the effective count range while preserving the decoded-decade behavior of the final stage. The broad supply range supports both low-voltage and higher-voltage industrial logic systems.

When laying out the circuit, keep the clock trace short and isolate it from the ten decoded outputs to reduce clock-feedthrough and switching noise. Respect the device's absolute maximum input-voltage limits, provide a stable supply and ground reference, and account for output rise and fall times when driving capacitive loads. This page combines manufacturer specifications, drop-in family alternatives, comparison data, and practical implementation guidance for counter and divider designs.

直接替换替代料: MC14017BF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MC14017BF (相同外形与封装尺寸) ——差异在于 Operation Mode, Package.

onsemi
Operation Mode: Fully static
Package: 16-SOIC, 3.90 mm width
对比 MC14017BF →

MC14017BD

✅ 直接替换 ⚠️ 规格未核验
onsemi
📦 SOIC-16
5-stage Johnson decade counter with built-in code converter · 3 V to 18 V · 10 outputs · 5-stage Johnson counter · Positive-going clock edge · DC clock input · Fully static · Spike-free decoded outputs

联系询价

查看数据手册 →

MC14017BDG

✅ 直接替换
📦 SOIC-16
Same MC14017B counter function and 16-pin SOIC footprint; ordering suffix differs with no stated electrical difference

📋 参考替代料(不在目录中)

MC14017BAL

✅ 直接替换 ⚠️ 规格未核验
📦 SOIC-16
Same MC14017B decade-counter core and 16-pin arrangement; ordering or qualification suffix differs, with 0% core-function difference

📋 参考替代料(不在目录中)

MC14017BALD

✅ 直接替换 ⚠️ 规格未核验
📦 SOIC-16
Same MC14017B counter core and 16-pin arrangement; automotive-oriented ordering suffix differs, with 0% core-function difference

📋 参考替代料(不在目录中)

MC14017B

✅ 直接替换
📦 SOIC-16
Base MC14017B family ordering code with the same counter function; package suffix must be selected to match the required assembly configuration

📋 参考替代料(不在目录中)

MC14017BF 最大额定值与电气特性

Product Type Five-stage Johnson decade counter with built-in code converter
Supply Voltage Range 3 V to 18 V
Maximum Operating Frequency 16 MHz
Propagation Delay 175 ns at 15 V, 50 pF
工作温度范围 -55 °C to +125 °C
Power Dissipation 500 mW
Decoded Outputs 10 outputs
Counter Stages 5 stages
Counting Ratio Divide by 10
Clock Edge Positive-going edge
Clock Input Mode Rising-edge and falling-edge operation
Programmable Divide Ratio Programmable
Cascading Supported
Operation Mode Synchronous and static operation
封装 SOIC-16-208 mil
安装类型 Surface mount
RoHS 状态 RoHS compliant

MC14017BF soic-16-208 mil 引脚配置指南

MC14017BF(soic-16-208 mil 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MC14017BF 的 soic-16-208 mil 封装引脚图

暂无详细引脚数据: MC14017BF.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC14017BF 适用于 6 应用s: Industrial Event Counter, Programmable Timer Module, Frequency Divider, Digital Sequencer, Test and Measurement Equipment, Automotive or Mobile Sequencing.

🏭

Industrial Event Counter

The MC14017BF fits industrial event-counting systems because it divides the input clock by 10 and provides ten decoded outputs for each decimal count period. A sensor-conditioning circuit can drive the clock while the decoded outputs advance through states zero to nine. With operation from 3 V to 18 V and a -55 °C to +125 °C range, it supports demanding control environments. The 175 ns propagation delay at 15 V and 50 pF gives the downstream logic timing margin, while the carry output allows a second stage to extend counting into higher decades.

⏱️

Programmable Timer Module

The MC14017BF can divide a periodic clock into ten stable intervals for programmable timers, strobes, or sequencers. Each decoded output provides a discrete state that can enable one circuit section at a time, avoiding a general-purpose microcontroller for simple counting functions. The device operates up to 16 MHz and accepts a 3 V to 18 V supply, allowing operation near the clock source without an intermediate level conversion. Its ten decoded outputs and carry function make cascaded timing useful for seconds, minutes, or other decade-based intervals.

📡

Frequency Divider

The MC14017BF is suitable as a decade frequency divider when a circuit requires a clean divide-by-10 relationship between two clock domains. The Johnson-counter implementation is designed for high-speed operation and spike-free decoded outputs, with a specified maximum frequency of 16 MHz. At 15 V and 50 pF, propagation delay is 175 ns, which defines useful timing margin for downstream logic. Designers can use the carry output to drive another stage and obtain division by 100 or higher while preserving modular clock generation.

⚡

Digital Sequencer

The ten decoded outputs of the MC14017BF can drive a simple cyclic sequence controller for relays, displays, actuators, or test fixtures. Each clock transition advances the active decoded state, allowing different loads to be enabled in a fixed order. Because the counter supports programmable divide ratios, it can also group clock cycles into longer macro-steps. The wide 3 V to 18 V supply range and surface-mount SOIC-16 package support compact industrial and instrument-control designs, while the carry output enables expansion beyond ten stages.

🖥️

Test and Measurement Equipment

The MC14017BF is useful in test equipment that must divide an instrument clock into repeated count windows or generate ten synchronized phases. The ten decoded outputs provide mutually exclusive timing states, while the carry output can initiate the next decade in a longer measurement sequence. A maximum operating frequency of 16 MHz supports high-rate test clocks, and the 175 ns delay at 15 V and 50 pF provides a defined basis for timing analysis. Short clock routing and controlled output loading remain important when precise measurement windows are required.

🚗

Automotive or Mobile Sequencing

The MC14017BF can implement low-complexity sequencing in automotive or mobile equipment when its specified temperature range, supply range, and package match the design requirements. The counter advances on a positive-going clock edge and offers ten decoded states for distributing control functions. Its maximum frequency of 16 MHz and 3 V to 18 V operating range support timing and logic functions within appropriate vehicle or portable-system rails. Automotive production designs should verify qualification, transient requirements, and exact suffix suitability with the manufacturer before release.

推荐产品汇总

MC14017BD onsemi 用于: Industrial Event Counter, Programmable Timer Module, Digital Sequencer MC14017BDG SOIC-16 ordering alternative 用于: Industrial Event Counter, Frequency Divider, Test and Measurement Equipment MC14017BAL Same-family counter alternative 用于: Programmable Timer Module, Digital Sequencer, Automotive or Mobile Sequencing MC14017BALD Ordering-qualified MC14017B option 用于: Frequency Divider, Automotive or Mobile Sequencing MC14017B Base family decade counter 用于: Test and Measurement Equipment
What is the operating voltage of MC14017BF?
The MC14017BF operates from 3 V to 18 V. According to the onsemi MC14017B datasheet, this supply range supports the counter across multiple industrial logic levels. Designers should maintain the supply within the specified operating range, connect the ground pin to a low-impedance reference, and avoid exceeding the absolute maximum ratings stated in the manufacturer datasheet.
What is the maximum frequency of MC14017BF?
The MC14017BF has a maximum operating frequency of 16 MHz. The onsemi MC14017B datasheet also specifies a propagation delay of 175 ns at 15 V with a 50 pF load. Actual usable frequency depends on clock rise and fall times, output loading, supply voltage, trace length, and the timing margin required by the surrounding system.
How does MC14017BF count and divide?
The MC14017BF is a five-stage Johnson decade counter with a built-in code converter that divides the clock by 10. Its ten decoded outputs identify the zero-through-nine count periods, while the carry output allows additional stages to be cascaded for larger division ratios. Output transitions occur on the positive-going clock edge according to the onsemi MC14017B datasheet.
What are the key specifications of MC14017BF that engineers should know?
The key MC14017BF specifications are a 3 V to 18 V supply range, 16 MHz maximum operating frequency, 175 ns propagation delay at 15 V and 50 pF, ten decoded outputs, and a -55 °C to +125 °C operating range. The onsemi MC14017B datasheet identifies the device as a five-stage Johnson decade counter in an SOIC-16-208 mil package.
Where can I download the MC14017BF datasheet PDF?
The official MC14017BF datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14017b-d.pdf. The manufacturer document contains the recommended operating conditions, absolute maximum ratings, timing characteristics, counter operation, output behavior, and package information needed for design and qualification.
Where can I find the MC14017BF pinout?
The MC14017BF pinout is shown in the pin-configuration section of the official onsemi MC14017B datasheet. Use the manufacturer's pin-description table when assigning the 16 SOIC pins to the clock, reset, carry, decoded outputs, supply, and ground. Preserve the pin numbering shown by the SOIC-16 package drawing rather than inferring connections from counter function alone.
Can MC14017BF be used for frequency division?
Yes, the MC14017BF divides a clock signal by 10 and provides ten decoded decade outputs. Its carry output can drive another counter, enabling cascaded division by 100, 1000, or higher powers of ten. According to the onsemi MC14017B datasheet, the device operates at frequencies up to 16 MHz, subject to timing and load conditions.
What is the difference between MC14017BF and MC14017BDG?
The MC14017BF and MC14017BDG belong to the same onsemi MC14017B counter family, but their ordering suffixes identify different package or reel configurations. The MC14017BF is specified in an SOIC-16-208 mil package and supports a 3 V to 18 V supply, 16 MHz operation, and ten decoded outputs. Confirm the physical marking and package drawing before substituting a suffix.
When should I choose MC14017BF over MC14017BDG?
Choose the MC14017BF when its specified SOIC-16-208 mil ordering configuration matches the PCB footprint, reel orientation, and assembly plan. Choose MC14017BDG only after confirming its package dimensions, pin arrangement, and marking match the existing design. Both belong to the MC14017B family and provide decade counting, but the exact suffix remains an ordering and mechanical decision.
Is MC14017BF suitable for industrial counter applications?
The MC14017BF is suitable for many industrial counter and sequencing applications because it supports a 3 V to 18 V supply and an operating temperature range of -55 °C to +125 °C. Its 16 MHz maximum frequency and 175 ns propagation delay at 15 V and 50 pF provide useful timing margins. Final suitability still depends on clock quality, loading, enclosure temperature, and system-level EMC requirements.
What is the best drop-in replacement for MC14017BF?
The MC14017BF can be replaced by another MC14017B ordering suffix only when that suffix uses the same 16-pin footprint and electrical function. MC14017BD and MC14017BDG are same-family alternatives listed for this comparison, while MC14017BAL and MC14017BALD provide additional ordering or qualification options. Verify pinout, temperature grade, package dimensions, and marking before production substitution.
What can replace MC14017BF?
MC14017BD and MC14017BDG are direct same-family candidates for replacing MC14017BF in an SOIC-16 counter circuit because they preserve the MC14017B decade-counter function and pin arrangement. The replacement must match the PCB land pattern, clock edge behavior, supply range, temperature requirements, and output timing. Do not use a package-only alternative without checking its pinout.
Is MC14017BF the same as MC14017BD?
No, MC14017BF and MC14017BD are not the same ordering code even though both are MC14017B-family decade counters. The suffix determines the specified package or reel configuration, so the mechanical drawing and ordering table must be checked before treating one as a replacement for the other. Their shared family name does not by itself guarantee a production drop-in match.
How should a clock signal be routed around MC14017BF?
Route the MC14017BF clock input as a short, direct trace with minimal parasitic capacitance and keep it away from the ten decoded outputs. The onsemi MC14017B datasheet specifies operation up to 16 MHz and a 175 ns delay at 15 V with a 50 pF load, so edge quality becomes increasingly important at higher frequencies. Use a solid ground plane and place any required clock-source components close to the input.
Where to buy MC14017BF online and what is its lead time?
Use the Request a Quote form on this page to ask for MC14017BF availability, current lead time, and minimum order quantity. The request should include the exact MPN MC14017BF and the required SOIC-16-208 mil reel configuration. A current manufacturing-status statement is preferable to relying on historical catalog inventory for this counter.
How much does MC14017BF cost and is it in stock?
Submit an MC14017BF request through the Request a Quote form on this page for current commercial terms, availability, and lead time. Include the exact MPN, desired reel quantity, and target date. The request form is the appropriate route for obtaining a current quotation without embedding a potentially stale market price in engineering documentation.

工程参考数据: MC14017BF ——对比、设计指导和合规信息。

选型指南

Choose the MC14017BF when the design requires a five-stage Johnson decade counter with ten decoded outputs, a 3 V to 18 V supply, and operation up to 16 MHz in the specified SOIC-16-208 mil configuration. It is particularly suitable for decade frequency division, event counting, programmable timing, and cyclic sequencing. MC14017BD and MC14017BDG are same-family options when their ordering codes match the required package and reel arrangement. MC14017BAL and MC14017BALD should be considered when their qualification or ordering characteristics better fit the production program. No alternative removes the need to verify the land pattern, pinout, clock behavior, temperature grade, and exact suffix. For designs requiring a different counter architecture, voltage level, or package, confirm a separate cross-reference rather than assuming functional equivalence.

与替代料对比

参数 本产品 MC14017BD MC14017BDG MC14017BAL MC14017BALD MC14017B
Package SOIC-16-208 mil SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 ordering family
Brand onsemi onsemi onsemi onsemi onsemi onsemi
Counter Architecture Five-stage Johnson decade counter with code converter Five-stage Johnson decade counter with code converter Five-stage Johnson decade counter with code converter Five-stage Johnson decade counter with code converter Five-stage Johnson decade counter with code converter Five-stage Johnson decade counter with code converter
Supply Voltage Range 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V 3 V to 18 V
Maximum Operating Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Propagation Delay 175 ns at 15 V, 50 pF 175 ns at 15 V, 50 pF 175 ns at 15 V, 50 pF 175 ns at 15 V, 50 pF 175 ns at 15 V, 50 pF 175 ns at 15 V, 50 pF
Decoded Outputs 10 outputs 10 outputs 10 outputs 10 outputs 10 outputs 10 outputs
Operating Temperature Range -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C -55 °C to +125 °C
Clock Edge Positive-going edge with falling-edge operation supported Positive-going edge with falling-edge operation supported Positive-going edge with falling-edge operation supported Positive-going edge with falling-edge operation supported Positive-going edge with falling-edge operation supported Positive-going edge with falling-edge operation supported
Cascading Supported Supported Supported Supported Supported Supported

关键差异点

  • Provides ten decoded outputs in a 16-pin SOIC package (对比 MC14017BDG)
  • Supports a broad 3 V to 18 V logic supply range (对比 MC14017BAL)
  • Combines divide-by-10 counting with cascade capability (对比 MC14017BALD)

设计说明

Route the clock input directly to the MC14017BF with minimal trace length and avoid running it parallel to the decoded outputs. The counter supports operation up to 16 MHz, so parasitic coupling and slow clock edges can reduce timing margin. Use a continuous ground plane, place the decoupling capacitor at the supply and ground pins, and keep the clock source physically separated from output-driven loads.

Do not treat the maximum 16 MHz frequency as an unconditional operating limit at every supply voltage or load. The stated 175 ns propagation delay is specified at 15 V with a 50 pF load, so designers must evaluate timing margin at the actual supply voltage, capacitance, and output fan-out. Preserve defined clock rise and fall times and leave unused counter inputs in the states specified by the manufacturer pin-description table.

A matching MC14017B suffix does not by itself prove a production drop-in replacement. Before substitution, compare the package drawing, land pattern, pin numbers, clock-edge behavior, supply range, temperature grade, output timing, reel orientation, and device marking. The listed alternatives preserve the counter function, but each ordered suffix must still be checked against the exact assembly configuration.

Provide a low-impedance supply and ground connection and place the required bypass capacitor close to the device. Although the maximum power dissipation is listed as 500 mW, actual dissipation depends on supply voltage, switching activity, output load, and ambient temperature. Avoid sharing narrow supply paths with unrelated noisy loads and verify the power budget at the highest expected clock rate.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product listing identifies MC14017BF as RoHS compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for this exact ordering code.

数据核验日期: 2026-11-16 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MC14017BF datasheet MC14017BF pinout MC14017BF datasheet pdf MC14017BF equivalent MC14017BF replacement MC14017BF cross reference MC14017BF vs MC14017BDG MC14017BF SOIC-16 pinout MC14017BF 16MHz decade counter MC14017BF 3V 18V counter onsemi MC14017BF MC14017BF frequency divider MC14017BF price MC14017BF stock

相关元器件 & 术语

onsemi Motorola MC14017BF MC14017B MC14017BD MC14017BDG MC14017BAL MC14017BALD five-stage Johnson decade counter decade counter counter and divider logic IC digital semiconductor clock divider programmable counter ten decoded outputs carry output positive-going clock edge falling-edge operation 3 V to 18 V supply voltage 16 MHz maximum frequency 175 ns propagation delay SOIC-16-208 mil package surface-mount technology RoHS industrial timing frequency division
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情