MC14046BF - 1.9MHz Phase-Locked Loop IC | onsemi
料号: MC14046BF ✓ 量产中MC14046BF 概述
A phase-locked loop is a feedback-control circuit that compares two signals and adjusts a controllable oscillator until the phase or frequency relationship reaches the required condition. The MC14046BF belongs to the PLL family within clock-generation and timing ICs. Its internal phase comparators detect differences between input signals, while the voltage-controlled oscillator varies its output frequency according to a control voltage. The source follower provides an interface to the timing network, and the zener diode supports stable operation in the intended CMOS supply range.
The main feature of the MC14046BF is its 1.9 MHz maximum operating frequency. This makes the IC appropriate for signal-generation and synchronization tasks that do not require the multi-gigahertz rates of a modern fractional-N synthesizer. Its 16-pin SOIC package supports conventional surface-mount PCB assembly while exposing the comparator, VCO, source-follower, and zener functions needed for external timing components. The broad integration reduces the number of separate blocks required in a basic PLL implementation.
In operation, the phase comparators evaluate the relationship between the input and feedback signals. Their control output is applied to the voltage-controlled oscillator through an external timing network, causing the oscillator to change frequency until the loop reaches its locked condition. The source-follower output can be used to develop a compatible feedback or timing signal. External resistors and capacitors determine loop dynamics, operating range, filtering, and startup behavior, so component selection and layout remain important parts of the design.
Typical applications include FM and AM demodulation, tone decoding, frequency multiplication, frequency division, clock recovery, synchronized signal generation, and low-to-medium-frequency synthesis. The 1.9 MHz operating limit makes the MC14046BF especially relevant to communications, instrumentation, industrial control, audio-frequency systems, and embedded timing circuits where a flexible analog PLL is more suitable than a fixed-frequency clock oscillator.
The primary design consideration is the external analog network around the PLL. Capacitor values, resistor tolerances, comparator polarity, VCO control-voltage limits, and loop filtering directly affect lock range and stability. Keep the timing and feedback paths compact, use a low-noise supply, and verify both acquisition and steady-state phase error across the required temperature range.
This page combines the verified 1.9 MHz frequency and 16-SOIC package information with practical implementation guidance, selection criteria, pinout-status clarification, and same-package replacement analysis. These engineering notes help distinguish a usable direct replacement from a merely similar PLL before committing to a PCB redesign.
直接替换替代料: MC14046BF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
MC14046BDWR2G
✅ 直接替换📋 参考替代料(不在目录中)
MC14046BD
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC14046BDW
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC14046BFL2
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC14046BFG
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC14046BFEL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MC14046BF 规格参数
| Product Type | Phase-locked-loop (PLL) IC |
| Maximum Operating Frequency | 1.9 MHz |
| Number of Phase Comparators | 2 |
| Voltage-Controlled Oscillator | 1 |
| Source Follower | 1 |
| Zener Diode | 1 |
| 封装 | 16-pin SOIC |
| Package Width | 5.30 mm |
| Package Length | 0.209 inch |
| 安装类型 | Surface mount |
| Technology | CMOS |
MC14046BF 0.209 inch 引脚配置指南
MC14046BF(0.209 inch 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MC14046BF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC14046BF 适用于 6 应用s: Frequency-Division Clocking, Frequency Multiplication, FM Signal Demodulation, Tone-Decoding and Control, Synchronized Signal Generation, Clock Recovery from Modulated Inputs.
Frequency-Division Clocking
The MC14046BF is suitable for generating a divided clock from a higher-frequency reference because its phase comparators and voltage-controlled oscillator can be configured into a feedback loop that locks to the reference relationship. The 1.9 MHz maximum operating frequency provides margin for divider and timing-network designs operating below the upper limit. Engineers should select the feedback ratio, capacitor values, and loop-filter components together so the VCO remains within its usable control range. Stable operation also requires checking startup, capture behavior, and phase error across the required temperature range rather than relying only on nominal simulation results.
推荐
Frequency Multiplication
The MC14046BF can support frequency-multiplication designs by feeding a divided VCO signal back to a phase comparator that references the external input. This arrangement allows the output oscillator to lock to a multiple of the reference frequency while the internal blocks perform the comparison and control functions. The 1.9 MHz operating ceiling limits the usable multiplication ratio and resulting output rate, so the complete frequency plan must be checked before implementation. External loop components determine acquisition range and phase stability, making careful layout and component-tolerance analysis essential.
推荐
FM Signal Demodulation
The MC14046BF is well suited to FM demodulation because a phase-locked loop can track the instantaneous frequency of a modulated input and translate that variation into a control voltage. The source follower provides a usable timing-related output for designing the loop network, while the VCO permits the feedback ratio to be selected. At a maximum operating frequency of 1.9 MHz, the device supports low-to-medium-frequency FM systems rather than high-bandwidth digital demodulation. Loop bandwidth, capture range, distortion, and output filtering should be tuned against the modulation characteristics.
推荐
Tone-Decoding and Control
The MC14046BF can be used in tone-detection and decoding circuits where an internal oscillator is compared with an incoming tone. When the signals reach the correct phase relationship, the comparator output changes state and can trigger a downstream control or indicator function. This arrangement is useful in communications, alarm, and industrial tone-decoding systems operating within the 1.9 MHz device limit. The timing capacitors and loop components establish the center frequency and lock behavior, so tolerance and temperature drift must be included in the design budget for reliable decoding.
推荐
Synchronized Signal Generation
The MC14046BF is appropriate when a generated signal must remain phase-locked to another clock or reference. The phase comparators detect the reference relationship, and the VCO adjusts until the loop reaches its locked state. This architecture is useful in instrumentation and embedded systems requiring multiple derived signals with a defined relationship. Because the PLL is implemented with analog timing and filter networks, component parasitics, supply noise, and board layout can affect phase error and jitter. A grounded plane and short feedback paths help preserve predictable loop behavior.
推荐
Clock Recovery from Modulated Inputs
The MC14046BF can support clock-recovery and synchronization tasks when the input signal contains a recoverable reference component. Its phase comparators and adjustable VCO create a feedback loop that corrects oscillator drift and phase displacement. The device is most relevant to communication and instrumentation systems below its 1.9 MHz maximum operating frequency. Engineering evaluation should cover input jitter, loop bandwidth, lock range, and startup time. External filtering and signal conditioning may be required when the recovered reference is noisy or the modulation rate approaches the loop's tracking capability.
推荐
推荐产品汇总
工程参考数据: MC14046BF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC14046BDWR2G | MC14046BD | MC14046BDW | MC14046BFL2 | MC14046BFG |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC, 5.30 mm width | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Product Type | Phase-locked-loop IC | Phase-locked loop | Phase-locked loop | Phase-locked loop | Phase-locked loop | Phase-locked loop |
| Maximum Operating Frequency | 1.9 MHz | 1.9 MHz | 1.9 MHz | 1.9 MHz | 1.9 MHz | 1.9 MHz |
| Phase Comparators | 2 | 2 | 2 | 2 | 2 | 2 |
| Voltage-Controlled Oscillator | 1 | 1 | 1 | 1 | 1 | 1 |
| Source Follower | 1 | 1 | 1 | 1 | 1 | 1 |
| Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Pin Count | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
关键差异点
- Directly documented same-package replacement path (对比 MC14046BDWR2G)
- Matches the target's core PLL architecture (对比 MC14046BD)
- Supports configurable low-to-medium-frequency synchronization (对比 MC14046BFG)
设计说明
Keep the VCO timing capacitors, loop-filter components, and feedback traces close to the MC14046BF and free from switching-node routing. High-current edges can couple through shared supply and ground paths and create phase jitter or unintended lock behavior. Use a continuous ground reference, avoid routing feedback beneath noisy digital buses, and place any external buffer or filter components according to the manufacturer's typical application layout.
Do not select the external timing network solely from the desired output frequency. The VCO's full control-voltage range, comparator output polarity, loop gain, and intended feedback ratio must be considered together. A circuit that produces the expected frequency in nominal simulation can fail to acquire lock if component tolerances, startup conditions, or temperature move the operating point beyond the capture range.
The PLL compares and filters small timing relationships, so supply and reference noise can translate directly into phase error or jitter. Decouple the supply near the device, use a low-noise reference, and keep the feedback node away from high-current switching paths. Evaluate the design across supply tolerance, temperature, and reference-jitter conditions instead of validating only at a nominal bench condition.
The MC14046BF's internal zener, VCO, and comparator circuits must remain within the absolute-maximum and recommended operating limits specified by the manufacturer. Before substituting a family variant, confirm that the replacement has equivalent supply-voltage limits and operating-temperature range. A shared 16-pin SOIC footprint does not by itself establish equivalent qualification or safe electrical operation.
合规信息
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MC14046BF ordering code. Check the manufacturer product documentation and the current material declaration for the selected grade.