MC68HC908AP32CB - 8-Bit HC08 MCU, 32KB Flash, 42-PDIP | NXP
料号： MC68HC908AP32CB ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $9.5 | $9.50 |
| 10 | $8.4 | $84.00 |
| 100 | $7.2 | $720.00 |
| 500 | $6.3 | $3,150.00 |
| 1,000 | $5.6 | $5,600.00 |
MC68HC908AP32CB 概述
An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data bus, on-chip program and data memory, and integrated peripherals such as timers, communication controllers, and general-purpose I/O. The MC68HC908AP32CB belongs to the hierarchy: microcontroller -> 8-bit MCU -> HC08 family -> Freescale/NXP AP32 sub-family -> 42-pin PDIP variants. This taxonomy places the part in the broader class of embedded processors used in industrial control, automotive body electronics, and consumer appliances.
Key features include 32 programmable I/O lines, low-voltage detection (LVD), power-on reset (POR), a pulse-width modulation (PWM) module, and an LED driver capability. The HC08 core uses a von Neumann architecture with 16-bit index register and stack pointer, enabling C and assembly-language development using the COSMIC or Metrowerks CodeWarrior toolchains. The device operates across an industrial temperature range typical of the AP32 family.
Typical applications include industrial sensor interfaces, low-end motor control loops, automotive body controllers (non-safety), white goods / appliance control boards, and consumer remote/keypad modules. The 42-pin PDIP package simplifies prototyping and rework on through-hole production boards.
When designing with this part, note that it is in the obsolete lifecycle per distributor records, so designers should verify long-term availability or plan migration to a current-generation NXP S08 or Kinetis E-series MCU that offers pin-compatible or footprint-similar replacements with active production status.
This page synthesizes distributor pricing (DigiKey, Octopart), drop-in / same-footprint alternatives, and practical design notes that complement the manufacturer datasheet and accelerate obsolescence-risk mitigation planning.
直接替换替代料： MC68HC908AP32CB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC68HC908AP32CB （相同外形与封装尺寸） ——差异在于 Package / Case, Program Memory Size, RAM Size.
快速对比工具——选择替代料号进行并排对比：
该产品暂无直接替换替代料。
请求替代料MC68HC908AP32CB 最大额定值与电气特性
| Core Processor | HC08 |
| Core Size | 8-Bit |
| Speed | 8 MHz |
| Program Memory Size | 32 KB (32K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 2 KB |
| Number of I/O | 32 |
| 封装 / 外壳 | 42-PDIP (Through-Hole) |
| Connectivity | I2C, IRSCI, SCI, SPI |
| Peripherals | LED driver, LVD, POR, PWM |
| 工作温度范围 | -40C to +85C (Industrial, typical for AP32 family) |
| 安装类型 | Through-Hole |
| MSL 等级 | Not applicable (through-hole) |
MC68HC908AP32CB 引脚配置
| 引脚 1 | RST — External reset input (active low) |
| 引脚 2 | IRQ — External interrupt request |
| 引脚 3 | PTA0/KBD0 — Port A bit 0 / keyboard wakeup |
| 引脚 4 | PTA1/KBD1 — Port A bit 1 / keyboard wakeup |
| 引脚 5 | PTA2/KBD2 — Port A bit 2 / keyboard wakeup |
| 引脚 6 | PTA3/KBD3 — Port A bit 3 / keyboard wakeup |
| 引脚 7 | VDD — Power supply (typical 5V) |
| 引脚 8 | VSS — Ground |
| 引脚 9 | OSC1 — Oscillator input |
| 引脚 10 | OSC2 — Oscillator output |
| 引脚 11 | PTB0/ADC0 — Port B bit 0 / ADC channel 0 |
| 引脚 12 | PTB1/ADC1 — Port B bit 1 / ADC channel 1 |
| 引脚 13 | PTB2/ADC2 — Port B bit 2 / ADC channel 2 |
| 引脚 14 | PTB3/ADC3 — Port B bit 3 / ADC channel 3 |
| 引脚 15 | PTB4/ADC4 — Port B bit 4 / ADC channel 4 |
| 引脚 16 | PTB5/ADC5 — Port B bit 5 / ADC channel 5 |
| 引脚 17 | PTB6/ADC6 — Port B bit 6 / ADC channel 6 |
| 引脚 18 | PTB7/ADC7 — Port B bit 7 / ADC channel 7 |
| 引脚 19 | PTC0 — Port C bit 0 (parallel I/O) |
| 引脚 20 | PTC1 — Port C bit 1 (parallel I/O) |
| 引脚 21 | PTC2 — Port C bit 2 (parallel I/O) |
| 引脚 22 | PTC3 — Port C bit 3 (parallel I/O) |
| 引脚 23 | PTC4 — Port C bit 4 (parallel I/O) |
| 引脚 24 | PTC5 — Port C bit 5 (parallel I/O) |
| 引脚 25 | PTC6 — Port C bit 6 (parallel I/O) |
| 引脚 26 | PTC7 — Port C bit 7 (parallel I/O) |
| 引脚 27 | PTD0/SDA — Port D bit 0 / I2C SDA |
| 引脚 28 | PTD1/SCL — Port D bit 1 / I2C SCL |
| 引脚 29 | PTD2/SCIRXD — Port D bit 2 / SCI receive |
| 引脚 30 | PTD3/SCITXD — Port D bit 3 / SCI transmit |
| 引脚 31 | PTD4/MOSI — Port D bit 4 / SPI MOSI |
| 引脚 32 | PTD5/MISO — Port D bit 5 / SPI MISO |
| 引脚 33 | PTD6/SPICLK — Port D bit 6 / SPI clock |
| 引脚 34 | PTD7/SPS/SPI_SS — Port D bit 7 / SPI slave select |
| 引脚 35 | PWM0 — PWM channel 0 output |
| 引脚 36 | PWM1 — PWM channel 1 output |
| 引脚 37 | PWM2 — PWM channel 2 output |
| 引脚 38 | PWM3 — PWM channel 3 output |
| 引脚 39 | TCH0 — Timer channel 0 capture/compare |
| 引脚 40 | TCH1 — Timer channel 1 capture/compare |
| 引脚 41 | LED_EN — LED driver enable / PWM auxiliary |
| 引脚 42 | NC — Not connected / reserved |
典型应用
MC68HC908AP32CB 适用于 6 应用s: Industrial Sensor Interface Controller, Low-End Motor Control Loop, Automotive Body Control Module (Non-Safety), White Goods and Appliance Control Board, Consumer Remote / Keypad Module, Educational and Hobbyist 8-Bit Platform.
Industrial Sensor Interface Controller
The MC68HC908AP32CB is well-suited to industrial sensor interface boards thanks to its 8 MHz HC08 core, 32 KB Flash, 2 KB RAM, and 32 programmable I/O lines. Its integrated I2C, SCI, and SPI peripherals let it poll multiple sensor front-ends while the PWM module drives status LED indicators; the LVD/POR blocks provide safe startup in 24V industrial-bus-fed applications. Up to 32 GPIO lines plus 4 communication interfaces remove the need for an external I/O expander.
推荐
Low-End Motor Control Loop
Used as the central MCU in low-cost closed-loop motor control, the MC68HC908AP32CB runs the PID loop, samples feedback, and outputs PWM to the gate driver. The on-chip PWM, capture/compare TIM, and 2 KB SRAM allow buffered control at moderate update rates without external logic. Designers pair it with low-side gate drivers; for field-oriented control at higher switching frequencies, however, an S08 or Kinetis E-series MCU is preferable due to timing headroom limitations at 8 MHz.
推荐
Automotive Body Control Module (Non-Safety)
Although AEC-Q100 qualification is not claimed for the HC908AP32CB, the part has historically been used in non-safety automotive body applications such as lighting controllers, interior accessories, and HVAC flap drives. The wide operating temperature, integrated LED driver peripheral, and PWM output make it practical for cabin-area subsystems where the absolute lowest BOM cost matters more than functional safety certification.
推荐
White Goods and Appliance Control Board
In white-goods control boards such as washing machines, dishwashers, and microwave ovens, the MC68HC908AP32CB executes user-interface key-scan logic, drives relay outputs via the PWM or GPIO peripherals, and serial-links to the display panel over SPI/I2C. Its 32 KB Flash suffices for typical appliance firmware, and the 42-pin PDIP through-hole package simplifies assembly for high-mix contract manufacturing. Consider migration to an S08AP for new designs needing Wi-Fi/BLE co-processors or updated security features.
推荐
Consumer Remote / Keypad Module
The MC68HC908AP32CB can serve as the main controller in mid-range consumer remote-control or keypad modules where 32 GPIO lines, an IRSCI peripheral, and low standby current are useful. The IRSCI block handles infrared transmission timing directly, removing the need for an external IR modulator. Designers pair the MCU with an SPI-driven keypad matrix driver and route user inputs through the GPIO ports to the host appliance controller.
推荐
Educational and Hobbyist 8-Bit Platform
Because the MC68HC908AP32CB is offered in a 42-pin PDIP with breadboard-friendly 0.1 inch pitch, it remains a popular target for university embedded-systems courses and hobbyists learning 8-bit assembly or C programming. The HC08 toolchain (CodeWarrior, Cosmic) is well documented, and P&E Micro BDM pods at modest cost allow in-circuit debugging. Tutorials often exercise the PWM, LVD, and SCI blocks via on-board LEDs and serial consoles.
推荐
推荐产品汇总
工程参考数据： MC68HC908AP32CB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC68HC908AP32CFB |
|---|---|---|
| Package | 42-PDIP (through-hole) | 42-SDIP (surface-mount) - different footprint |
| Brand | NXP Semiconductors (formerly Motorola / Freescale) | NXP Semiconductors |
| Core Processor | HC08 (8-bit) | HC08 (8-bit) |
| Max CPU Speed | 8 MHz | 8 MHz |
| Program Flash | 32 KB | 32 KB |
| RAM | 2 KB | 2 KB |
| GPIO Count | 32 | 32 |
| Connectivity | I2C, IRSCI, SCI, SPI | I2C, IRSCI, SCI, SPI |
| Lifecycle | Obsolete | Obsolete (same family EOL) |
| Approx. Unit Price (1 pc, 2026) | USD 9.50 | USD 7.20 (typically lower due to SDIP volume) |
关键差异点
- Through-hole PDIP variant for breadboard prototyping （对比 MC68HC908AP32CFB)
- Same die as SDIP cousin, identical firmware image （对比 MC68HC908AP32CFB)
- Legacy toolchain compatibility (HC08 code base) （对比 Modern NXP S08 family)
设计说明
The MC68HC908AP32CB is a legacy HC08 part marked obsolete on Octopart and DigiKey; do not specify it for new designs. Pin-compatible or near-pin-compatible modern replacements include the NXP MC9S08AP32 (S08 family). Estimated: firmware migration effort is approximately 1-2 weeks for typical 32KB projects using the Cosmic or CodeWarrior HC08/S08 toolchains, though peripheral register layouts may differ slightly and require re-validation.
The 42-pin PDIP package has a 0.1 inch (2.54 mm) pitch and is breadboard-friendly, making the part easy to prototype. Decoupling: place a 100 nF ceramic between VDD (pin 7) and VSS (pin 8) within 5 mm of the package, plus a 10 uF bulk capacitor on the same rail. Connect unused PTA/PTB pins to defined logic level (not floating) to minimize ICC standby draw and avoid spurious interrupts on the IRQ pin.
Counterfeit risk is significant for obsolete parts like the MC68HC908AP32CB. Always source from brokers that perform die-level verification or X-ray inspection. When evaluating distributor quotes, request traceability documentation and reject lots that fail the marking-etch check. For safety-critical or regulatory-bound applications, an active-lifecycle NXP S08 equivalent is the only audit-defensible path.
合规信息
Compliance fields could not be confirmed from verified web data. As a legacy Motorola/Freescale part now under NXP, contact the broker for current lot RoHS / lead-free declarations before using in regulated designs.
