MC9S08DZ96CLL - 8-Bit 40MHz MCU with 96KB Flash | NXP
料号： MC9S08DZ96CLL ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4.0428 | $4.04 |
| 10 | $4.0428 | $40.43 |
| 100 | $4.0428 | $404.28 |
| 500 | $4.0428 | $2,021.40 |
| 1,000 | $4.0428 | $4,042.80 |
MC9S08DZ96CLL 概述
The S08 is an enhanced HCS08 8-bit microcontroller architecture designed to balance processing performance, memory, peripherals, and power-management requirements in embedded systems. It belongs to the MCU hierarchy: microcontroller, embedded controller, semiconductor, and programmable control device. Its integrated CAN, Flash, EEPROM, ADC, LCD driver, and on-chip debug resources reduce the need for external components in cost-sensitive designs.
Key verified features include a 40 MHz HCS08 CPU operating with a 20 MHz bus, support for up to 32 interrupt and reset sources, a 24-channel 12-bit ADC, and 40 I/O ports. The device operates from a 2.7 V to 5.5 V supply, and the provided data identifies an operating specification of 16 MHz in one aggregated source while the product listings identify the MCU family as 40 MHz. Confirm the exact clock configuration and operating conditions against the NXP datasheet for the selected temperature and package variant.
The embedded Flash supports firmware storage, while the EEPROM provides nonvolatile data storage for calibration, configuration, or runtime parameters. CAN connectivity is useful for automotive and industrial nodes that require reliable network communication. The integrated LCD driver supports display-oriented industrial meters, automotive displays, and portable equipment, while the ADC enables sensor acquisition and analog monitoring without requiring a separate converter.
Typical applications include CAN-connected automotive modules, industrial meters, portable instruments, control panels, sensor interfaces, and compact embedded controllers. Design layouts should provide the manufacturer-recommended bypass capacitors, preserve the exposed programming and debug functions, and verify signal-level compatibility on all communications interfaces. The 100-LQFP package requires a fine-pitch PCB footprint and careful assembly planning.
This page consolidates the verified distributor and manufacturer information for the MC9S08DZ96CLL, including package, memory, core, interface, and lifecycle information. Pricing and stock should be checked with authorized distributors before purchase, while firmware migration and replacement decisions require verification of pinout, clock settings, memory mapping, and peripheral compatibility.
MC9S08DZ96CLL 最大额定值与电气特性
| Microcontroller Type | 8-bit S08 HCS08 microcontroller |
| CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Flash Memory | 96 KB |
| EEPROM Memory | 2 KB |
| ADC Resolution | 12-bit |
| ADC Channels | 24 channels |
| ADC Conversion Time | 2.5 µs |
| I/O Ports | 40 |
| Interrupt and Reset Sources | Up to 32 sources |
| 电源电压 | 2.7 V to 5.5 V |
| 封装 | 100-LQFP (14x14 mm) |
| Package Type | 100-pin LQFP |
| Embedded CAN | Yes |
| Integrated LCD Driver | Yes |
| 存储器类型 | Flash and EEPROM |
| 生命周期状态 | NRND according to the NXP product page snippet |
MC9S08DZ96CLL 100-pin lqfp 引脚配置指南
MC9S08DZ96CLL（100-pin lqfp 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MC9S08DZ96CLL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08DZ96CLL 适用于 6 应用s: Automotive CAN Control Module, Industrial Meter and Instrument Display, Portable Sensor and Monitoring Device, Industrial Sensor Interface Node, CAN-Based Distributed Control, Compact Automotive Instrument Cluster.
Automotive CAN Control Module
The MC9S08DZ96CLL fits automotive control modules because it combines a 40 MHz HCS08 core, 96KB Flash, 2KB EEPROM, and embedded CAN in one 100-LQFP device. Place it between the vehicle network transceiver and local sensors or actuators, using CAN for node communication and Flash for application firmware. The 12-bit ADC can monitor up to 24 analog channels, while EEPROM can retain calibration and configuration data. The main design checks are CAN transceiver compatibility, pin assignment, regulator noise, and qualification requirements; the verified data does not state an automotive qualification status for this exact MPN.
推荐
Industrial Meter and Instrument Display
The integrated LCD driver makes the MC9S08DZ96CLL relevant to industrial meters, panel instruments, and portable measurement products. Its 40 MHz S08 core supports control logic and display updates, while the 12-bit, 24-channel ADC can acquire sensor signals for measurement, alarm, or calibration functions. The 96KB Flash provides room for firmware and the 2KB EEPROM can retain user settings or calibration coefficients. The exact LCD voltage, bias, segment count, and pin multiplexing must be verified in the datasheet because those details are not included in the supplied snippets.
推荐
Portable Sensor and Monitoring Device
The MC9S08DZ96CLL is suitable for portable monitoring equipment that combines local sensing, nonvolatile data, and a compact display. The 2.7 V to 5.5 V supply range supports common regulated rails, and the 2KB EEPROM can hold small configuration records without relying solely on Flash. The 24-channel ADC provides a practical analog front end for sensors, although front-end filtering and input conditioning remain board-level responsibilities. For battery products, check the current-consumption and sleep-mode figures in the complete NXP datasheet, since they are not provided in the verified snippets.
推荐
Industrial Sensor Interface Node
Use the MC9S08DZ96CLL as a local sensor-interface node when a design needs more analog channels than a basic microcontroller provides. Its 24-channel, 12-bit ADC supports monitored inputs, and the 40 MHz S08 core can service acquisition, filtering, threshold logic, and communications. The device can store operating parameters in 2KB of EEPROM and firmware in 96KB of Flash. In a real node, protect analog inputs from transients, provide a clean ADC reference, and validate the 2.5 µs conversion-time claim under the selected clock and sampling configuration.
推荐
CAN-Based Distributed Control
The embedded CAN interface makes the MC9S08DZ96CLL appropriate for distributed control networks in industrial and automotive subsystems. The MCU can execute local control logic, supervise analog inputs, and exchange status or commands through a CAN transceiver. Its 96KB Flash supports a complete application image, while EEPROM preserves node-specific parameters. Firmware design should include bus fault handling, arbitration behavior, watchdog strategy, and transceiver standby control. Because the supplied data does not include CAN protocol limits or transceiver details, those values should be confirmed from the official documentation.
推荐
Compact Automotive Instrument Cluster
The integrated LCD driver and ADC make the MC9S08DZ96CLL a candidate for compact instrument and display-control designs. It can acquire sensor channels, run control and filtering software, and drive an LCD while retaining configuration in EEPROM. The 100-LQFP package offers numerous external connections in a 14x14 mm footprint, but its fine pitch demands careful PCB layout, assembly control, and thermal verification. Verify display requirements, CAN integration, automotive qualification, and operating-temperature limits before treating the device as a production-ready cluster controller.
推荐
推荐产品汇总
工程参考数据： MC9S08DZ96CLL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 100-LQFP (14x14 mm) |
| Brand | NXP Semiconductors |
| CPU Core | S08 HCS08, 8-bit |
| CPU Frequency | 40 MHz |
| Flash Memory | 96 KB |
| EEPROM Memory | 2 KB |
| ADC | 24 channels, 12-bit, 2.5 µs |
| Interfaces | Embedded CAN and integrated LCD driver |
| Supply Voltage | 2.7 V to 5.5 V |
| Lifecycle | NRND according to NXP product page snippet |
关键差异点
- Integrated display and network capability （对比 MC9S08DV96CLL)
- Memory and analog acquisition capacity （对比 MC9S08AW32CPUE)
- Supply and package integration （对比 MC9S08FL8CLC)
设计说明
Use the exact 100-LQFP 14x14 mm footprint from the NXP package drawing and verify every pin assignment against the official datasheet before layout. Place required decoupling capacitors close to the supply pins, keep analog and digital return paths intentional, and provide clean routing for CAN and LCD signals. The supplied data does not include a complete pinout or recommended land pattern, so PCB design should not be finalized from distributor package names alone.
The verified supply range is 2.7 V to 5.5 V. Select the system regulator so its output remains within the MCU’s specified limits across input variation, temperature, and load transients. Estimated: if the MCU is supplied from a regulated 3.3 V rail and its average current is I amperes, the regulator must supply I plus local peripheral current with suitable transient margin; the actual current value must be obtained from the datasheet and application workload.
Route the 40 MHz CPU clock according to the NXP layout guidance, minimizing stubs and keeping the clock path away from noisy CAN switching nodes. The ADC inputs require controlled source impedance and filtering, while the LCD and CAN interfaces should be separated where practical to reduce coupling. The verified snippets do not specify clock rise-time limits, ADC input impedance, or LCD timing, so those values must be obtained from the manufacturer datasheet.
Do not treat MC9S08DZ96CLL, MC9S08DV96CLL, MC9S08AW32CPUE, or MC9S08FL8CLC as interchangeable without checking the complete pinout, memory map, peripheral set, electrical limits, and firmware device identifier. The supplied comparison results mention related parts but do not establish drop-in equivalence. Also verify the NRND lifecycle status and obtain an authorized sourcing plan before committing a new production design.
合规信息
The supplied web data does not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for the exact MPN.