MC9S08SE4CWL - 8-Bit 20MHz 4KB MCU | NXP | SOIC-28
料号： MC9S08SE4CWL ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.608 | $2.61 |
| 10 | $2.608 | $26.08 |
| 100 | $2.608 | $260.80 |
| 500 | $2.608 | $1,304.00 |
| 1,000 | $2.608 | $2,608.00 |
MC9S08SE4CWL 概述
A microcontroller is a programmable integrated circuit that combines a CPU core, memory, and peripherals in one device. The S08 family is positioned as a cost-effective 8-bit MCU platform, and the MC9S08SE4CWL is intended for embedded control tasks where modest processing capacity, compact packaging, and established Freescale/NXP S08 compatibility are useful. Its 20 MHz CPU enables basic control loops, digital I/O handling, timing functions, and communication-interface integration.
The key verified characteristics are the 8-bit CPU architecture, 20 MHz operating frequency, 4 KB flash, 4K x 8 organization, 28-pin SOIC package, and 5 V MCU classification. The related S08SE documentation describes compatibility with Freescale 5 V MCU portfolios and identifies the enhanced S08 core and 10 MHz internal bus. Detailed RAM, peripherals, electrical limits, and timing parameters were not included in the supplied verified data and are therefore marked as data needed rather than estimated.
Typical engineering uses include small industrial controllers, sensor-interface boards, keypad and display products, simple motor or relay-control systems, and compact consumer products that retain the S08 software ecosystem. Because the target is marked End of Life on the NXP product page, new designs should confirm availability, migration requirements, and any recommended replacement before committing to production.
For a new PCB, engineers should verify the exact pinout, oscillator requirements, supply limits, programming method, and peripheral assignments against the official NXP data sheet before layout. For an existing design, the 28-pin SOIC footprint is not sufficient proof of drop-in equivalence; pin functions, memory size, voltage requirements, clock behavior, and software compatibility must all be checked.
This page consolidates the verified distributor classification, package, memory, speed, lifecycle indication, and sourcing references with practical selection guidance. It does not infer unavailable electrical limits or claim unverified replacements.
直接替换替代料： MC9S08SE4CWL ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC9S08SE4CWL （相同外形与封装尺寸） ——差异在于 Package, Flash Memory, CPU Architecture, RAM, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
MC9S08SE4MWL
✅ 直接替换✓ 有现货
$2.5 / 个
查看数据手册 →MC9S08SE8VWL
✅ 直接替换✓ 有现货
$2.34 / 个
查看数据手册 →MC9S08QE4CWJ
✅ 直接替换✓ 有现货
$1.437 / 个
查看数据手册 →MC9S08QE4CLC
✅ 直接替换✓ 有现货
$5.378 / 个
查看数据手册 →MC9S08QG4CDNE
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →MC9S08SE4CWL 最大额定值与电气特性
| CPU Architecture | 8-bit |
| CPU Family | S08 |
| Maximum CPU Frequency | 20 MHz |
| Internal Bus Frequency | 10 MHz |
| Flash Memory | 4 KB |
| Flash Organization | 4K x 8 |
| Supply Classification | 5 V MCU |
| 封装 | 28-pin SOIC |
| Package Width | 7.50 mm |
| 安装类型 | Surface Mount |
| Core Type | Enhanced S08 core |
| Program Memory Type | Flash |
MC9S08SE4CWL 7.50 mm 引脚配置指南
MC9S08SE4CWL（7.50 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MC9S08SE4CWL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC9S08SE4CWL 适用于 6 应用s: Small Industrial Control Panel, Sensor Interface Module, Simple Relay and Actuator Controller, Keypad and Display Product, Consumer Appliance Controller, Legacy System Maintenance.
Small Industrial Control Panel
The MC9S08SE4CWL fits compact control-panel tasks that use an 8-bit CPU for button scanning, state-machine control, relay sequencing, alarm handling, and basic supervisory logic. Its verified 20 MHz operating speed provides more scheduling headroom than a minimal low-clock controller, while 4 KB of flash constrains firmware to appropriately focused control code. The 28-pin SOIC package also supports conventional surface-mount assembly and rework. Before layout, verify every pin against the official data sheet because the supplied source confirms the package but not the pin map.
推荐
Sensor Interface Module
MC9S08SE4CWL can serve as the embedded controller in a small sensor-interface module that samples switches, digital sensors, or simple analog front-end signals and converts them into usable control data. The 8-bit architecture is appropriate for digital thresholding, debouncing, filtering, status encoding, and communication buffering rather than computationally intensive signal processing. The 20 MHz CPU allows responsive handling of multiple inputs, but the 4 KB flash limit requires a compact firmware plan. Pin multiplexing, ADC availability, and communication peripherals are not specified in the supplied data and must be verified.
推荐
Simple Relay and Actuator Controller
The MC9S08SE4CWL is suitable for controlling relays, solenoids, lamps, and other actuator loads in a compact embedded controller. Firmware can implement debouncing, interlocks, timing sequences, fault flags, and low-power standby behavior within the limited 4 KB flash budget. The 20 MHz S08 CPU provides useful timing margin for deterministic event handling, while the 28-pin SOIC format is convenient for panel-board assembly. External transistor or relay-driver hardware, flyback protection, and supply sizing remain board-level requirements and cannot be inferred from the distributor listing.
推荐
Keypad and Display Product
For a keypad, menu display, or human-interface product, MC9S08SE4CWL can manage scanning, debouncing, display updates, indicator states, and simple configuration storage. Its 8-bit architecture and 20 MHz frequency are well matched to these tasks, where deterministic real-time behavior is more important than high arithmetic throughput. The 4 KB flash constraint should be checked against display fonts, protocol handlers, and update logic before final firmware allocation. The supplied records do not identify LCD, serial, or storage peripherals, so interface selection requires official datasheet confirmation.
推荐
Consumer Appliance Controller
MC9S08SE4CWL can be evaluated for cost-sensitive consumer products that require a compact controller for mode selection, timing, safety interlocks, motor commands, and status indication. The S08 8-bit platform is consistent with simple embedded appliances and products that already support the Freescale/NXP S08 tool ecosystem. Its 20 MHz operation supports responsive state management, while the 4 KB flash footprint favors focused firmware. Because the device is identified as End of Life, appliance makers should weigh longevity, tooling continuity, and migration effort before committing to a new mass-market design.
推荐
Legacy System Maintenance
MC9S08SE4CWL is most defensible in legacy-system maintenance where an existing board, firmware toolchain, or approved component list already depends on the S08SE architecture. Maintaining the same MCU family can reduce schematic, layout, and software qualification effort compared with redesigning around a different architecture. The distributor references indicate continuing availability from some channels, but the NXP End of Life status requires a controlled procurement and obsolescence plan. Record the exact package, pinout, firmware revisions, and supply-chain risk before approving continued use.
推荐
推荐产品汇总
工程参考数据： MC9S08SE4CWL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC9S08SE4MWL | MC9S08SE8VWL | MC9S08QE4CWJ | MC9S08QE4CLC | MC9S08QG4CDNE |
|---|---|---|---|---|---|---|
| CPU Architecture | 8-bit S08 | 8-bit S08SE-family candidate; exact details require verification | 8-bit S08SE-family candidate; exact details require verification | 8-bit NXP MCU candidate; exact details require verification | 8-bit NXP MCU candidate; exact details require verification | 8-bit NXP MCU candidate; exact details require verification |
| Package | 28-pin SOIC | 28-pin SOIC candidate | 28-pin SOIC candidate | 28-pin SOIC candidate | 28-pin SOIC candidate | 28-pin SOIC candidate |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
关键差异点
- Directly identified NXP S08SE-family 20 MHz and 4 KB configuration （对比 MC9S08SE4MWL)
- Reference sourcing information is available （对比 MC9S08SE8VWL)
- Established 28-pin SOIC integration target （对比 MC9S08QE4CWJ)
设计说明
Do not finalize the power rail or decoupling network from the distributor summary alone. The verified data identifies the part as a 5 V MCU but does not provide input-voltage limits, current consumption, or manufacturer-recommended capacitor values. Check the official NXP data sheet and reference design for the exact supply range, bulk and high-frequency capacitor recommendations, pin power requirements, and startup behavior before PCB release.
Reserve a clean 28-pin SOIC footprint only after checking the exact package drawing, pin-one orientation, and pad dimensions. The supplied records confirm a 28-pin SOIC package and 7.50 mm width but do not provide the official land pattern or pin assignments. Verify all power, ground, reset, oscillator, programming, and peripheral pins against the NXP documentation; a matching package count does not guarantee a drop-in replacement.
Treat the NXP End of Life indication as a design constraint, not merely a stock notice. Confirm whether existing firmware, programmers, debuggers, and production test fixtures remain supported, and request the official discontinuance or replacement information. The available cross-reference results do not establish a manufacturer-confirmed pin-compatible substitute, so changing MPN without a complete pin, electrical, peripheral, and software review can create hidden production risks.
合规信息
The supplied verified data does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed from the current NXP product documentation or supplier declarations.
