MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP
料号： MK30DN5127ZVLQ10 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MK30DN5127ZVLQ10 概述
A microcontroller, or MCU, is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface logic into one device. The K30 series sits within the broader MCU hierarchy alongside 8-bit, 16-bit, and 32-bit controllers. Its 32-bit Cortex-M4 architecture, 512 KB program storage, and 100 MHz clock position it for embedded control, human-interface, communications, analog monitoring, and display-oriented systems.
The verified information identifies the package as 144-LQFP and the programming interface as SWD and JTAG. It also associates the device with Ethernet, USB 2.0, a segment LCD controller, and a 16-bit ADC. These capabilities make it appropriate for connected industrial controls, data acquisition modules, medical and test instruments, operator panels, and embedded gateways. The available source material does not verify the exact ADC resolution, LCD segment count, SRAM capacity, supply range, or peripheral pin assignments, so those details must be confirmed in the manufacturer datasheet before design release.
The target suffix contains the “7” after 512, distinguishing it from the related MK30DN512ZVLQ10 listing. Because the supplied search data does not formally establish that the two MPNs are pin-compatible, engineers should not substitute one for the other without checking the official K30 ordering information, pin multiplexing tables, electrical limits, and exposed programming pins.
A practical design begins by assigning every LQFP ball to power, ground, reset, clock, programming, communications, analog, and LCD functions according to the manufacturer datasheet. Route sensitive analog inputs away from switching nodes, provide clean references and bypass capacitors, and verify signal levels against the exact device variant. Firmware must also use the matching K30 memory map, startup code, clock configuration, and peripheral drivers.
This page consolidates verified distributor inventory, the official NXP family overview, package information, and engineering cautions that are not available from a raw distributor listing alone. It intentionally distinguishes verified facts from data that still requires confirmation, reducing the risk of an invalid drop-in substitution or incomplete production design.
直接替换替代料： MK30DN5127ZVLQ10 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MK30DN5127ZVLQ10 （相同外形与封装尺寸） ——差异在于 Package, RoHS Status, Flash Memory, ADC, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
MK30DN512ZVLQ10
✅ 直接替换📋 参考替代料（不在目录中）
MK51DN512ZCLQ10
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
联系询价
查看数据手册 →MK50DN512CLQ10
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$10.21 / 个
查看数据手册 →MK10DN512ZAB10R
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$5.73 / 个
查看数据手册 →MK50DX256CLK10
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$6.8178 / 个
查看数据手册 →MK30DN5127ZVLQ10 最大额定值与电气特性
| Device Type | 32-bit microcontroller |
| Product Family | Kinetis K30 |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| 封装 | 144-LQFP |
| Package Body Size | 20 x 20 mm |
| Programming Interface | SWD and JTAG |
| Ethernet Support | Yes |
| USB Version | USB 2.0 |
| Display Controller | Segment LCD controller |
| ADC | 16-bit ADC |
| Application Classification | LCD and mixed-signal |
| 安装类型 | Surface mount |
| RoHS 状态 | Compliant |
MK30DN5127ZVLQ10 20 x 20 mm 引脚配置指南
MK30DN5127ZVLQ10（20 x 20 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MK30DN5127ZVLQ10.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MK30DN5127ZVLQ10 适用于 6 应用s: Segment LCD Operator Panel, Industrial Data-Acquisition Module, Connected Embedded Gateway, Medical Monitoring Instrument, Test and Measurement Front Panel, Programmable Control Controller.
Segment LCD Operator Panel
The MK30DN5127ZVLQ10 fits a segment LCD control panel because the verified record classifies it as a Kinetis K30 LCD and mixed-signal MCU with a 100 MHz Cortex-M4 core. Its 512 KB flash supports panel firmware, display state machines, keypad handling, diagnostics, and communications while the LCD controller reduces parallel-display workload. Ethernet and USB 2.0 associations can support configuration or service connectivity. Because the exact segment capacity and pin map are not provided, engineers must verify the 144-LQFP ball assignments, drive levels, glass interface, and alternate functions before release.
推荐
Industrial Data-Acquisition Module
The MK30DN5127ZVLQ10 is suitable for a mixed-signal acquisition module when the design needs a 100 MHz Arm Cortex-M4 core, 512 KB program storage, and a reported 16-bit ADC. Firmware can sample sensors, filter results, enforce limits, and expose records through USB 2.0 or Ethernet rather than relying on a host processor. The 144-LQFP package exposes many signal options, but analog accuracy and acquisition timing are not stated in the supplied data. Validate ADC reference noise, input impedance, channel multiplexing, acquisition time, grounding, and calibration against the exact manufacturer datasheet.
推荐
Connected Embedded Gateway
The MK30DN5127ZVLQ10 can serve as the application processor in an embedded gateway because the verified K30 information associates the family with Ethernet, USB 2.0, advanced analog integration, and serial communication. A gateway implementation can collect local data, manage configuration, present status on an LCD, and forward records through wired or USB links. The available source does not define Ethernet PHY requirements, USB modes, protocol stacks, or security peripherals, so board planning must include the required external components. Confirm package multiplexing and firmware-driver support for the exact ordering code.
推荐
Medical Monitoring Instrument
The MK30DN5127ZVLQ10 fits monitoring-instrument prototypes that combine sensor acquisition, local display control, and USB connectivity. Its reported 16-bit ADC can support sensor-interface evaluation, while 512 KB flash provides room for measurement algorithms, calibration tables, event logs, and communications firmware. The LCD and mixed-signal classification aligns with compact diagnostic or patient-monitoring interfaces. Medical use still requires system-level validation, including input protection, isolation, accuracy, alarm behavior, and applicable regulatory evidence; no medical certification is claimed by the supplied data.
推荐
Test and Measurement Front Panel
The MK30DN5127ZVLQ10 is relevant to test and measurement equipment requiring local controls, a segment display, acquisition, and a host interface. The 100 MHz Cortex-M4 core can coordinate front-end commands, calibration, measurements, fault states, and USB 2.0 data transfer, while Ethernet can support longer-lived instrument networking when supported by the exact device configuration. The 144-LQFP footprint is sizable but exposes many mixed I/O options. Before schematic capture, verify analog pin availability, debug access, peripheral multiplexing, reference-voltage requirements, and board-level signal integrity.
推荐
Programmable Control Controller
The MK30DN5127ZVLQ10 can support a programmable controller combining digital I/O, analog monitoring, LCD feedback, and service communications. Its 512 KB flash allows more complex state logic and protocol handling than many 8-bit controllers, while the 32-bit Cortex-M4 architecture supports structured firmware development. SWD and JTAG provide verified programming and debug options. A production controller should still use the exact pinout, pin-muxing configuration, clock tree, memory map, reset behavior, and low-power requirements from the manufacturer documentation; none should be inferred from package size alone.
推荐
推荐产品汇总
工程参考数据： MK30DN5127ZVLQ10 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MK30DN512ZVLQ10 | MK51DN512ZCLQ10 | MK50DN512CLQ10 | MK10DN512ZAB10R | MK50DX256CLK10 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP |
| Flash Memory | 512 KB | 512 KB | 512 KB indicated by MPN; verified feature confirmation unavailable | 512 KB indicated by MPN; verified feature confirmation unavailable | 512 KB indicated by MPN; verified feature confirmation unavailable | 256 KB indicated by MPN |
关键差异点
- Exact target identification （对比 MK30DN512ZVLQ10)
- Verified K30 feature alignment （对比 MK50DN512CLQ10)
- Program-memory capacity （对比 MK50DX256CLK10)
设计说明
Do not begin the target schematic from the related MK30DN512ZVLQ10 page alone. Download the exact K30-family datasheet and ordering table, then map all 144 LQFP positions for the “7” suffix. Check power, ground, reset, clock, SWD, JTAG, LCD, ADC, Ethernet, USB, and alternate-function pins. Treat the supplied package and headline specifications as verified while leaving every unsupported electrical or multiplexing claim unapproved.
Separate analog inputs and references from Ethernet, USB, display, and high-speed digital routing. Use a continuous ground reference, place decoupling close to verified power pins, and keep analog traces short and away from switching nodes. The reported 16-bit ADC does not by itself guarantee accurate 16-bit measurements; reference noise, source impedance, sampling time, grounding, and calibration determine usable resolution.
The most consequential risk is treating similarly named K30 devices as automatically interchangeable. Compare the exact ordering code, pin multiplexing, electrical limits, peripherals, memory map, qualification, and lifecycle status. A same-package replacement that changes Ethernet, USB, LCD, ADC, or debug assignments can prevent boot, disable peripherals, or create hazardous board-level mismatches. Production approval should include schematic parity and firmware regression checks.
Use the exact datasheet power tree and decoupling requirements rather than a generic 3.3 V MCU pattern. Budget voltage regulation for external Ethernet components, LCD drive load, USB circuitry, analog references, and startup current in addition to the MCU. The supplied data does not state supply voltage, current, or power dissipation, so no thermal or regulator-sizing calculation is defensible until those values are obtained.
合规信息
RoHS-compliant status is stated in the verified Full-Electronic result. No verified source supplied REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals evidence.