NXP Semiconductors

MKE02Z32VLC2 - 20MHz Cortex-M0+ 32KB MCU | NXP | LQFP-32

料号: MKE02Z32VLC2 ✓ 量产中
2.7 V to 5.5 V Vdss 32-LQFP (7 x 7 mm) Package 20 MHz Speed 32 KB Memory
最小起订量: 1 |

MKE02Z32VLC2 概述

NXP Semiconductors MKE02Z32VLC2 is a 32-bit Arm Cortex-M0+ microcontroller operating up to 20 MHz, with 32 KB of embedded Flash memory and 4 KB of SRAM, housed in a 32-pin LQFP package measuring 7 x 7 mm. The device operates from 2.7 V to 5.5 V and supports an ambient temperature range from -40 °C to 105 °C.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The Kinetis KE02 belongs to the microcontroller hierarchy and combines a low-power Arm Cortex-M0+ core with analog, timing, communication, and control peripherals. Its single-cycle 32-bit multiplier and 32-bit architecture provide efficient control processing for compact embedded products.

The MKE02Z32VLC2 provides 32 KB of Flash for firmware and 4 KB of SRAM for working data. Its operating frequency of up to 20 MHz gives control loops and communication handlers useful processing headroom without requiring a larger MCU. The 2.7 V to 5.5 V supply range accommodates industrial and automotive-style 5 V systems as well as compatible 3.3 V designs.

Integrated peripherals make the KE02 useful for systems that require more than digital GPIO. NXP describes the family with integrated CAN and LIN communication modules and a 12-bit analog-to-digital converter, supporting automotive, industrial, and cost-sensitive embedded-control applications. Flash write operation is also specified across the 2.7 V to 5.5 V supply range.

Typical uses include motor and actuator controllers, automotive body and interface modules, industrial sensing nodes, CAN or LIN subnet gateways, and compact consumer appliances. The 32-LQFP package exposes more interface pins than small-surface-mount MCU packages while remaining compatible with automated PCB assembly and inspection.

Designers should preserve clean supply routing, provide the required decoupling close to VDD pins, and use the pin-description and electrical-characteristics tables in the manufacturer datasheet when assigning alternate-function pins. Because software, bootloader behavior, and peripheral mapping are device-specific, firmware validation and brownout behavior should be checked against the final system power profile.

This product overview combines the MKE02Z32VLC2 architecture, electrical limits, package details, pin-compatible family options, and application guidance. It also organizes replacement selection around the shared 32-LQFP footprint while highlighting memory, frequency, and qualification differences that determine whether a candidate is truly suitable for an existing design.

直接替换替代料: MKE02Z32VLC2 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MKE02Z32VLC2 (相同外形与封装尺寸) ——差异在于 Package, Pin Count, SRAM, Flash Memory, Maximum CPU Frequency.

NXP Semiconductors
Package: 32-LQFP
Pin Count: 32
SRAM: 2 KB
对比 MKE02Z32VLC2 →
NXP Semiconductors
Package: 32-LQFP, 7 mm × 7 mm
Maximum CPU Frequency: 40 MHz
对比 MKE02Z32VLC2 →
NXP Semiconductors
Package: 32-LQFP (7x7 mm)
Pin Count: 32
对比 MKE02Z32VLC2 →

MKE02Z32VLC4

✅ 直接替换
NXP Semiconductors
📦 32-LQFP (7 x 7 mm)
32-bit ARM Cortex-M0+ Microcontroller · Kinetis KE02 · 40 MHz · 32 KB · 4 KB · ARM Cortex-M0+ · 3.3 V/5 V · 32-LQFP, 7 mm × 7 mm

联系询价

查看数据手册 →

MKE02Z64VLC2

✅ 直接替换 ⚠️ 规格未核验
NXP Semiconductors
📦 32-LQFP (7 x 7 mm)
Arm Cortex-M0+ 32-bit · 20 MHz · 64 KB · 4 KB · 2.7 V to 5.5 V · 2.7 V to 5.5 V · -40 C to +105 C · 32-bit x 32-bit

联系询价

查看数据手册 →

MKE02Z16VLC4

✅ 直接替换 ⚠️ 规格未核验
NXP Semiconductors
📦 32-LQFP (7 x 7 mm)
32-bit ARM Cortex-M0+ microcontroller · Kinetis KE02 · 40 MHz · Arm Cortex-M0+ · 16 KB (16K x 8) · 2 KB · 32-bit · 3.3 V to 5 V

联系询价

查看数据手册 →

MKE02Z32VLC2R

✅ 直接替换
📦 32-LQFP (7 x 7 mm)
Identical MKE02Z32VLC2 electrical and logical configuration with the same 32-LQFP footprint; the R suffix changes the shipping format from tray to reel, so the PCB remains compatible but procurement handling differs.

📋 参考替代料(不在目录中)

MKE02Z64VLC4

✅ 直接替换 ⚠️ 规格未核验
📦 32-LQFP (7 x 7 mm)
Same KE02 family and 32-LQFP footprint, but Flash increases from 32 KB to 64 KB, a 100% increase; the higher-memory device must also be checked for device-specific performance and timing changes.

📋 参考替代料(不在目录中)

MKE02Z16VLC2

✅ 直接替换 ⚠️ 规格未核验
NXP Semiconductors
📦 32-LQFP (7 x 7 mm)
ARM Cortex-M0+ · 20 MHz · 16 KB · 2 KB · 2.7 V to 5.5 V · 2.7 V to 5.5 V · -40 °C to +105 °C · 32-LQFP

联系询价

查看数据手册 →

MKE02Z32VLC2 最大额定值与电气特性

Product Type 32-bit microcontroller
Product Family Kinetis KE02
Processor Core Arm Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 20 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
SRAM 4 KB
Multiplier Single-cycle 32-bit x 32-bit
Operating Voltage Range 2.7 V to 5.5 V
Flash Write Voltage Range 2.7 V to 5.5 V
Ambient Operating Temperature Range -40 °C to 105 °C
ADC Resolution 12-bit
Communication Interfaces CAN and LIN
封装 32-LQFP (7 x 7 mm)
引脚数量 32 pins
安装类型 Surface mount
Shipping Format Tray
生命周期状态 Active

MKE02Z32VLC2 32-lqfp (7 x 7 mm) 引脚配置指南

MKE02Z32VLC2(32-lqfp (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MKE02Z32VLC2 的 32-lqfp (7 x 7 mm) 封装引脚图

暂无详细引脚数据: MKE02Z32VLC2.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MKE02Z32VLC2 适用于 6 应用s: Automotive Body Control Module, Industrial Sensor and Actuator Node, CAN Gateway Module, LIN Subnetwork Controller, Precision Analog Control Platform, Compact Motor and Actuator Controller.

🚗

Automotive Body Control Module

The MKE02Z32VLC2 fits compact body-control nodes that need deterministic control processing, CAN or LIN connectivity, and local analog monitoring. Its Arm Cortex-M0+ core operates up to 20 MHz, while 32 KB Flash holds application firmware and 4 KB SRAM supports the working state of control tasks. The 2.7 V to 5.5 V supply range and -40 °C to 105 °C ambient specification suit vehicle environments where 5 V-powered electronics are common. In a multi-node design, the device can supervise switches, debounce inputs, read sensors through the 12-bit ADC, and report status over a vehicle network. Validate clock tolerances, transceiver interfaces, EMC behavior, and qualification for the specific vehicle program.

🏭

Industrial Sensor and Actuator Node

The MKE02Z32VLC2 is appropriate for distributed industrial sensing and actuator-control nodes that must collect analog measurements and apply local logic without a higher-performance processor. Its 12-bit ADC supports sensor conditioning, while the 20 MHz Cortex-M0+ core can supervise timers, communication routines, and output timing. Thirty-two KB of Flash accommodates compact protocol and control software, and 4 KB of SRAM provides space for buffers and the active task stack. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V industrial rails, depending on the complete subsystem design. For deployed equipment, include input filtering, calibrated references, transient protection, and a watchdog strategy in the system-level fault analysis.

🌐

CAN Gateway Module

The MKE02Z32VLC2 can serve as the local controller in a CAN gateway that converts or organizes messages between embedded subsystems. Its integrated CAN capability removes the need for a separate CAN protocol controller, while the Cortex-M0+ core running up to 20 MHz can handle message filtering, routing, diagnostics, and local supervisory logic. The 32 KB Flash limit requires disciplined firmware sizing, so use compact drivers and remove unused features from production builds. Four kilobytes of SRAM is adequate for short protocol buffers and should be checked against stack depth and simultaneous message load. Validate bit timing, transceiver characteristics, termination, bus-fault recovery, and compliance with the network's communication specification before deployment.

🚗

LIN Subnetwork Controller

The MKE02Z32VLC2 is well suited to LIN-connected slave or subnetwork nodes because the controller integrates a LIN communication module alongside a 20 MHz Arm Cortex-M0+ processor. It can manage command reception, device-state reporting, diagnostic handling, and coordination of discrete outputs on a low-cost vehicle network. Its 32 KB Flash is suitable for compact LIN applications, while the 4 KB SRAM must be budgeted for the protocol stack, application state, and interrupt-driven buffer use. The 2.7 V to 5.5 V range aligns with many 5 V LIN nodes, and the -40 °C to 105 °C specification covers a broad environmental range. Verify timing tolerances, sleep and wake behavior, pull-up implementation, and bus behavior against the final vehicle electrical specification.

🔧

Precision Analog Control Platform

The MKE02Z32VLC2 can control a compact analog measurement system using its 12-bit ADC and high-frequency Cortex-M0+ processing core. The processor can execute offset and gain correction, filtering, threshold evaluation, and calibration logic between sensor inputs and an actuator or communications interface. Thirty-two KB of Flash supports compact firmware, while 4 KB of SRAM accommodates sample buffers and calibration parameters. Its 2.7 V to 5.5 V supply range permits operation across common industrial rails, and the -40 °C to 105 °C ambient range supports extended-temperature equipment. Preserve analog signal integrity by separating sensitive routes from switching nodes, stabilizing the ADC reference, and checking acquisition timing and acquisition impedance against the manufacturer’s electrical-characteristics tables.

⚡

Compact Motor and Actuator Controller

The MKE02Z32VLC2 can coordinate compact motors, valves, relays, or other actuators where real-time output timing and diagnostic control are more important than maximum flash capacity. Its 20 MHz Cortex-M0+ core supports timer-based control, while 32 KB Flash accommodates a focused control application and 4 KB SRAM supports state variables and short command queues. Integrated CAN, LIN, and 12-bit ADC resources allow the controller to receive commands, monitor a feedback signal, and report faults without separate logic components. The 32-LQFP package provides adequate pin access for control signals and analog inputs in a 7 x 7 mm footprint. Validate driver topology, flyback energy handling, current limits, thermal rise, and protection behavior under worst-case mechanical loading.

What are the key specifications of MKE02Z32VLC2 that engineers should know?
The MKE02Z32VLC2 is an active 32-bit Kinetis KE02 microcontroller with an Arm Cortex-M0+ core, up to 20 MHz operating frequency, 32 KB Flash, 4 KB SRAM, and a 32-LQFP package. According to the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7, its operating and Flash-write voltage range is 2.7 V to 5.5 V, while its ambient temperature range is -40 °C to 105 °C. Integrated CAN, LIN, and a 12-bit ADC support communication-oriented and analog-sensing designs.
What is the operating voltage of MKE02Z32VLC2?
The MKE02Z32VLC2 operates from 2.7 V to 5.5 V. According to the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7, the Flash-write voltage range is also 2.7 V to 5.5 V. This makes the controller suitable for compatible 3.3 V and 5 V embedded systems. Supply design must still meet the datasheet requirements for decoupling, rise time, operating conditions, and brownout behavior.
How much Flash and SRAM does MKE02Z32VLC2 have?
The MKE02Z32VLC2 contains 32 KB of Flash memory organized as 32K x 8 bits and 4 KB of SRAM. The Flash provides space for firmware, configuration data, and boot code, while SRAM supports stack, variables, buffers, and peripheral data handling. According to the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7, the 32 KB Flash configuration corresponds to the Z32 density variant.
What processor core and clock speed does MKE02Z32VLC2 use?
The MKE02Z32VLC2 uses a 32-bit Arm Cortex-M0+ processor core and operates up to 20 MHz. According to the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7, the core includes a single-cycle 32-bit x 32-bit multiplier. This combination provides efficient control processing for peripheral management, communications, and real-time embedded applications.
What package does MKE02Z32VLC2 use?
The MKE02Z32VLC2 is supplied in a 32-pin LQFP package measuring 7 x 7 mm. The NXP product listing identifies the package as 32-LQFP, and the associated product data describes the unit as tray-packed. Use the manufacturer pin-description table and land-pattern guidance when assigning signals and designing the PCB footprint.
Where can I download the MKE02Z32VLC2 datasheet PDF?
The official MKE02Z32VLC2 information is available through the NXP product page, while the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7 contains the family-level electrical, pin, and timing information. Use the manufacturer datasheet for the authoritative pin-description table, absolute maximum ratings, recommended operating conditions, and package dimensions.
Where can I find the MKE02Z32VLC2 pinout?
The MKE02Z32VLC2 pinout is found in the pin-description table of the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7. The component uses a 32-pin LQFP package, and its exact signal assignments include power, ground, reset, clock, programming, and peripheral functions. Use that table when assigning multiplexing options and PCB nets because alternate-function mappings must match the selected device and package.
What communications and analog peripherals are integrated in MKE02Z32VLC2?
The MKE02Z32VLC2 integrates CAN and LIN communication modules together with a 12-bit ADC. NXP describes these resources as supporting automotive and industrial embedded-control applications. Their usefulness depends on the selected pin multiplexing, clock configuration, and firmware drivers, so consult the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7 before assigning communication or analog channels.
What is the temperature range of MKE02Z32VLC2?
The MKE02Z32VLC2 is specified for an ambient operating temperature range of -40 °C to 105 °C. According to the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7, this range applies to the stated operating and Flash-write voltage conditions. Final product qualification still requires checking the controller's internal temperature rise, power dissipation, and the complete system's environmental requirements.
Is MKE02Z32VLC2 suitable for automotive and industrial control systems?
The MKE02Z32VLC2 is suitable for automotive and industrial control concepts that fit its 2.7 V to 5.5 V supply range, -40 °C to 105 °C ambient range, CAN or LIN interfaces, and 12-bit ADC. According to NXP, the KE02 family targets automotive and industrial applications. Specific vehicle or safety programs must separately confirm qualification, EMC, functional-safety, and production-part requirements.
Where can I buy MKE02Z32VLC2 and check current availability?
Use the Request a Quote form on this page to request current MKE02Z32VLC2 availability, lead time, and order quantities. The manufacturer lists the MKE02Z32VLC2 as active. The component is associated with tray packaging, so buyers should also confirm the required delivery format and any scheduled order quantities before releasing a production purchase order.
What is the price of MKE02Z32VLC2?
The current MKE02Z32VLC2 price is calculated through the Request a Quote form on this page rather than presented as a static figure. The form allows buyers to specify quantity, packaging requirements, and purchasing needs so that the commercial response reflects current market and supply conditions. NXP lists the device as active.
What is the lead time for MKE02Z32VLC2?
The current MKE02Z32VLC2 lead time should be confirmed through the Request a Quote form on this page. NXP identifies the exact MKE02Z32VLC2 as active and the product listing identifies tray packaging. For production planning, provide the required quantity, delivery date, and packaging format so that current manufacturing and distribution status can be incorporated into the commitment.
What is the best drop-in replacement for MKE02Z32VLC2?
The best drop-in replacement is the NXP MKE02Z32VLC4 when its higher-performance characteristics are acceptable and the same 32-LQFP footprint remains valid. The replacement preserves the 32 KB Flash configuration and family architecture, while its operating details differ from the MKE02Z32VLC2. Confirm speed, electrical limits, pin functions, qualification, and firmware timing in the NXP documentation before treating it as a drop-in substitution.
MKE02Z32VLC2 vs MKE02Z64VLC2 - which is better for a memory-intensive design?
The MKE02Z64VLC2 is the better choice when firmware or data storage exceeds the MKE02Z32VLC2's 32 KB Flash capacity because it provides a higher-memory option within the pin-compatible KE02 family. The MKE02Z32VLC2 remains preferable when 32 KB Flash is sufficient and the lower-memory configuration better matches the BOM. Validate the shared pin assignments and device-specific electrical and timing details before migration.
When should I choose MKE02Z32VLC2 over a larger Kinetis E-series MCU?
Choose the MKE02Z32VLC2 when a compact 20 MHz Cortex-M0+ controller, 32 KB Flash, 4 KB SRAM, and integrated CAN, LIN, and ADC resources satisfy the design without requiring a larger memory footprint or more pins. It is appropriate for cost-sensitive automotive and industrial control nodes where the 7 x 7 mm 32-LQFP package and 2.7 V to 5.5 V operating range fit the system.
Can STM32G031C8U6TR replace MKE02Z32VLC2?
The STM32G031C8U6TR should not be treated as a confirmed pin-to-pin drop-in replacement for the MKE02Z32VLC2 without a complete pin, memory, peripheral, and electrical comparison. Although both are Arm Cortex-M0+ microcontrollers, their package pinouts, peripheral implementations, clock systems, and software ecosystems differ. A board replacement is appropriate only after the manufacturer documentation confirms every used net and the production firmware is ported.
What should engineers verify before changing an MKE02Z32VLC2 design to a replacement?
Verify the package footprint, complete pin map, supply limits, Flash and SRAM requirements, clock behavior, communication peripherals, ADC characteristics, reset configuration, programming method, and temperature requirements. The NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7 is the primary reference for the original device. Any candidate should also be checked for lifecycle status, qualification, and firmware support before schematic release.

工程参考数据: MKE02Z32VLC2 ——对比、设计指导和合规信息。

选型指南

Choose the MKE02Z32VLC2 when a design needs a compact 20 MHz Arm Cortex-M0+ controller with 32 KB Flash, 4 KB SRAM, CAN, LIN, and a 12-bit ADC in a 32-LQFP package. Its 2.7 V to 5.5 V supply range and -40 °C to 105 °C ambient specification suit compatible industrial and automotive control nodes. Select MKE02Z32VLC4 when the same memory density and footprint are needed but the higher-family operating characteristics are preferable. Choose MKE02Z64VLC2 or MKE02Z64VLC4 when 32 KB Flash is too restrictive and a 64 KB device can fit the board. The 16 KB variants are appropriate only when the firmware fits comfortably. MKE02Z32VLC2R provides the closest functional match when reel-fed production handling is required. Before any substitution, compare the complete pin table, clock limits, peripheral mapping, qualification, and firmware requirements.

与替代料对比

参数 本产品 MKE02Z32VLC4 MKE02Z64VLC2 MKE02Z16VLC4 MKE02Z32VLC2R MKE02Z64VLC4 MKE02Z16VLC2
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm) 32-LQFP (7 x 7 mm)
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Flash Memory 32 KB 32 KB 64 KB 16 KB 32 KB 64 KB 16 KB

关键差异点

  • Matches the Kinetis E-series pin-compatible architecture (对比 MKE02Z32VLC4)
  • Provides substantially more firmware memory for pin-compatible migration (对比 MKE02Z64VLC2)
  • Uses the same core architecture and peripheral class as the direct family option (对比 MKE02Z32VLC2R)

设计说明

Design the supply network so the MKE02Z32VLC2 receives a clean signal within its 2.7 V to 5.5 V operating range. Place the required input capacitors directly across the appropriate supply and ground pins, keep the return path short, and route high-current switching nodes away from the MCU. Check supply ramp time and brownout behavior against the NXP KE02 Sub-Family Data Sheet MKE02P64M20SF0 Rev. 7, particularly when the MCU powers up with peripheral loads or a slowly rising rail.

Use the manufacturer land pattern and pin table for the 32-LQFP (7 x 7 mm) package rather than treating every 32-pin quad flat package as mechanically identical. Place decoupling capacitance near each supply pin, provide a continuous ground reference, and avoid routing fast or switching signals beneath the MCU where they can increase radiated emissions or disturb sensitive measurements. Confirm pin-1 orientation against the package outline and the selected component footprint before fabrication.

Do not substitute a pin-compatible-looking MCU solely because it uses a Cortex-M0+ core. MKE02Z32VLC2 replacements must be checked for the exact LQFP pin map, 32 KB Flash and 4 KB SRAM requirements, clock configuration, reset and programming pins, peripheral assignments, and electrical limits. A functional equivalent may require schematic, bootloader, and firmware changes even when its package dimensions match.

Treat ADC inputs and communication lines according to their source impedance and the acquisition characteristics in the NXP datasheet. Keep analog traces short, provide a stable reference, and isolate them from CAN, LIN, switching, and high-current actuator paths. For communication interfaces, match external transceiver and termination requirements to the bus specification, and verify signal levels, timing, and electromagnetic behavior at the assembled prototype stage.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product is listed as active by NXP. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer compliance documentation or the requested supplier documentation.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MKE02Z32VLC2 datasheet MKE02Z32VLC2 pinout MKE02Z32VLC2 datasheet pdf MKE02Z32VLC2 specifications MKE02Z32VLC2 equivalent MKE02Z32VLC2 replacement MKE02Z32VLC2 cross reference MKE02Z32VLC2 footprint MKE02Z32VLC2 application circuit MKE02Z32VLC2 price MKE02Z32VLC2 stock NXP MKE02Z32VLC2 MKE02Z32VLC2 vs MKE02Z64VLC2 32-LQFP Cortex-M0+ microcontroller MKE02Z32VLC2 automotive microcontroller

相关元器件 & 术语

NXP Semiconductors MKE02Z32VLC2 MKE02Z32VLC4 MKE02Z64VLC2 MKE02Z16VLC4 MKE02Z32VLC2R Kinetis KE02 Arm Cortex-M0+ microcontroller embedded microcontroller semiconductor 32-bit RISC architecture single-cycle multiplier 32 KB Flash memory 4 KB SRAM CAN interface LIN interface 12-bit ADC LQFP-32 package surface-mount technology industrial control automotive electronics analog signal conditioning Kinetis E series MCU
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情