MPC8377EVRALG - PowerQUICC II Pro MPU 667MHz e300c4s | NXP
料号： MPC8377EVRALG ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $71.2 | $712.00 |
| 100 | $64.85 | $6,485.00 |
| 500 | $58.4 | $29,200.00 |
| 1,000 | $52.95 | $52,950.00 |
MPC8377EVRALG 概述
Background: A microprocessor (MPU) is the central processing unit of an embedded system, executing instruction fetch, decode, ALU operations, and memory access. Within the broader taxonomy, the MPC8377E belongs to the PowerQUICC II Pro family of communications processors (PowerPC architecture -> 32-bit embedded MPU -> communications processor -> system-on-chip). These devices evolved from the original PowerQUICC line to add high-speed serial I/O and integrated security, targeting networking and storage infrastructure where deterministic I/O and protocol offload matter more than raw CPU frequency.
Key features of the MPC8377EVRALG include the e300c4s core with integrated FPU, hardware-accelerated security engine supporting DES/3DES/AES/SHA-1/MD5/RSA/ECC, dual 10/100/1000 Mbps Ethernet MACs with SGMII support, two PCI Express interfaces, one USB 2.0 (High-Speed) controller, four DMA channels, a 32-bit DDR1/DDR2 memory controller, and a 16-bit local bus interface. The integrated SEC 3.3 accelerator offloads cryptographic operations at line rate, freeing the e300 core for control-plane and exception-handling tasks.
Architecture depth: The e300c4s is a superscalar PowerPC core with 32 KB instruction and 32 KB data L1 caches, a unified 256 KB L2 cache with ECC, and a 32-bit true little-endian execution model. The system-on-chip fabric integrates dedicated engines for security, pattern matching, and QoS queues, with a multi-channel DMA engine that supports descriptor-based chaining. Operating voltage is 1.0 V core / 1.8 V or 2.5 V DDR / 3.3 V I/O across three independent rails.
Typical applications include wired and wireless routing/switching infrastructure (edge routers, DSLAM line cards, WiMAX/Wi-Fi base stations), secure VPN/IPSec gateways, network-attached storage (NAS) controllers, industrial automation controllers, and print/image-processing platforms. The combination of dual GbE, PCI Express, and hardware-accelerated cryptography makes it particularly suited for managed Layer 2/3 switches and IPsec-aware CPE gateways.
Design consideration: At 667 MHz the typical power dissipation is on the order of 2.5-3 W, so the exposed-pad 689-TEPBGA package requires a minimum four-layer PCB stack-up with a continuous ground plane beneath the die and stitching vias around the BGA perimeter for thermal relief. Always sequence core and DDR rails together and observe the 1.0 V +/- 5% tolerance window specified for the e300c4s core.
Unique value: This page consolidates NXP datasheet specifications, cross-brand drop-in equivalents, and practical board-level design notes not found in the standalone MPC8377E reference manual.
直接替换替代料： MPC8377EVRALG ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MPC8377EVRALG （相同外形与封装尺寸） ——差异在于 Memory Controller, Series, Ethernet, RoHS Status, USB.
快速对比工具——选择替代料号进行并排对比：
MPC8377VRALG
✅ 直接替换✓ 有现货
$24.95 / 个
查看数据手册 →MPC8379VRALG
✅ 直接替换✓ 有现货
$52.4 / 个
查看数据手册 →MPC8377EVRANGA
✅ 直接替换✓ 有现货
$46.75 / 个
查看数据手册 →MPC8378VRALG
✅ 直接替换📋 参考替代料（不在目录中）
MPC8377CVRALG
✅ 直接替换✓ 有现货
$29.53 / 个
查看数据手册 →MPC8377EVRALG 最大额定值与电气特性
| Manufacturer | NXP Semiconductors |
| Series | PowerQUICC II Pro |
| Core Architecture | PowerPC e300c4s |
| Core Count | 1 |
| 数据总线宽度 | 32-bit |
| Maximum Core Frequency | 667 MHz |
| L1 Cache (I/D) | 32 KB / 32 KB |
| L2 Cache | 256 KB unified |
| Operating Voltage (Core) | 1.0 V |
| Operating Voltage (I/O) | 3.3 V |
| Operating Voltage (DDR) | 1.8 V or 2.5 V |
| Memory Controller | DDR1/DDR2, 32-bit with ECC |
| Ethernet MAC | Dual 10/100/1000 Mbps (SGMII/RGMII) |
| PCI Express | 2 lanes (x1/x2) |
| USB | USB 2.0 High-Speed (host/device) |
| Security Engine | SEC 3.3 (DES/3DES/AES/SHA/RSA/ECC) |
| Local Bus | 16-bit, up to 83 MHz |
| 封装 | 689-TEPBGA II (31x31 mm), exposed pad |
| 安装类型 | Surface Mount (BGA) |
| MSL 等级 | 3 (per JEDEC J-STD-020) |
| RoHS 状态 | Compliant (lead-free, 'G' suffix) |
MPC8377EVRALG 689-tepbga ii (31x31 mm), exposed pad 引脚配置指南
MPC8377EVRALG（689-tepbga ii (31x31 mm), exposed pad 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MPC8377EVRALG.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MPC8377EVRALG 适用于 6 应用s: IPsec / SSL VPN Gateway Appliance, Managed Layer 2/3 Ethernet Switch, Network-Attached Storage (NAS) Controller, Industrial Automation / Process Controller, Wireless Base Station (WiMAX / Small-cell LTE), Secure Print / Image Processing Controller.
IPsec / SSL VPN Gateway Appliance
The MPC8377EVRALG's SEC 3.3 hardware accelerator offloads AES, 3DES, SHA-1, and RSA operations at line rate, enabling multi-hundred-Mbps encrypted throughput without burdening the 667 MHz e300c4s core. Placed as the central processor on a 4-layer FR4 mainboard, it pairs with two SGMII PHYs for WAN/LAN and one PCI Express x1 lane for an optional hardware RNG. The DDR2-667 controller sustains crypto-key table fetches, and the local bus drives a NAND flash for key storage. Compared with a software-only crypto stack on a generic MPU, this design typically sustains 3-5x higher IMIX throughput at the same clock frequency.
推荐
Managed Layer 2/3 Ethernet Switch
Dual Gigabit Ethernet MACs with SGMII and RGMII interfaces allow the MPC8377EVRALG to terminate two uplinks while the local bus drives an external managed switch ASIC such as the NXP QorIQ-aware or Vitesse portfolio. The 32-bit DDR2 controller provides 5+ GB/s of memory bandwidth for routing-table lookups, and the four DMA channels feed packet descriptors between MAC and switch fabric without CPU intervention. At 667 MHz the e300c4s core sustains hundreds of thousands of routes for SMB/SOHO managed switches. Hardware ECC on L2 cache and DDR improves mean-time-between-failure in always-on deployments.
推荐
Network-Attached Storage (NAS) Controller
For SOHO and SMB NAS designs, the MPC8377EVRALG integrates SATA/RAID-class glue via PCI Express, USB 2.0 for external backup drives, and the local bus for legacy ATA/ATAPI bridges. The DDR2 controller with ECC protects file-system metadata from single-bit corruption, while the SEC 3.3 engine accelerates SMB3 and iSCSI CHAP authentication. At 667 MHz the e300c4s delivers sustained 80-120 MB/s file transfer on CIFS/NFS with hardware crypto enabled, making the part a strong fit for 4-8 bay NAS enclosures.
推荐
Industrial Automation / Process Controller
Industrial control designs benefit from the MPC8377EVRALG's mix of deterministic I/O (local bus), real-time connectivity (PCIe for motion-control cards), and fieldbus support via software stacks running on the e300c4s core. The 16-bit local bus drives parallel ADC/DAC and opto-isolated digital I/O modules, while USB 2.0 supports HMI panels and configuration tools. The hardware security engine enables signed-firmware verification per IEC 62443 for industrial cybersecurity. Operating temperature range spans the industrial -40 C to +85 C window (subject to specific NXP part-number suffix validation).
推荐
Wireless Base Station (WiMAX / Small-cell LTE)
The MPC8377EVRALG's combination of dual GbE MACs, PCI Express expansion, and hardware QoS queues makes it well-suited as a baseband processor in small-cell WiMAX or LTE base stations. The SEC 3.3 engine accelerates ciphering/integrity protection for LTE S1/X2 interfaces, offloading critical-path cryptography from the e300c4s core. DDR2 bandwidth at 333 MHz sustains HARQ soft-bit buffer accesses, while the local bus interfaces with FPGA-based PHY front-ends. The 31x31 mm BGA package fits within the typical 150x100 mm small-cell baseband PCB envelope.
推荐
Secure Print / Image Processing Controller
Multi-function printer (MFP) controllers require fast image-pipeline throughput, secure firmware boot, and high-speed networking - all delivered by the MPC8377EVRALG. The PCI Express lane connects to image-processing ASICs or external GPUs, while the local bus drives the scanner CCD/CMOS interface. SEC 3.3 hardware offloads TLS/IPsec for secure print release and Kerberos authentication in enterprise MFPs. The DDR2 controller's bandwidth sustains 600+ DPI color scans at 30+ pages-per-minute without CPU bottlenecks.
推荐
推荐产品汇总
工程参考数据： MPC8377EVRALG ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8377VRALG | MPC8379VRALG | MPC8377EVRANGA | MPC8378VRALG | MPC8377CVRALG |
|---|---|---|---|---|---|---|
| Package | 689-TEPBGA II (31x31 mm) | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 667 MHz | 667 MHz | 667 MHz | 533 MHz | 667 MHz | 667 MHz |
| SEC 3.3 Security Engine | Yes | No | Yes | Yes | No | No |
| USB 2.0 HS Controller | Yes | Yes | Yes | Yes | No | No |
| PCI Express Lanes | 2 | 2 | 2 | 2 | 2 | 2 |
| Dual GbE MAC | Yes (SGMII/RGMII) | Yes | Yes | Yes | Yes | Yes |
| DDR1/DDR2 Controller | 32-bit with ECC | 32-bit with ECC | 32-bit with ECC | 32-bit with ECC | 32-bit with ECC | 32-bit with ECC |
| RoHS Compliance | Yes (G suffix) | Yes (G suffix) | Yes (G suffix) | Yes (G suffix) | Yes (G suffix) | Yes (G suffix) |
关键差异点
- Integrated SEC 3.3 hardware security accelerator （对比 MPC8377VRALG)
- Higher peripheral integration vs MPC8378VRALG （对比 MPC8378VRALG)
- Same 689-TEPBGA II footprint as the broader MPC83xx family （对比 MPC8379VRALG)
设计说明
The 689-TEPBGA II package relies on the center exposed pad (die-flag) for primary thermal relief. Per NXP design guidelines, the PCB must include a continuous 5x5 via array (0.3 mm drill, 0.5 mm pitch) directly beneath the package, with vias stitched to internal ground planes. At 667 MHz typical power is 2.5-3 W; without proper thermal vias the junction temperature can exceed 105 C in still-air, triggering throttling or shutdown. Use a 4-layer minimum stack-up with 1 oz copper on outer layers and 2 oz on inner planes.
The MPC8377EVRALG requires three independently sequenced rails: VDD_CORE = 1.0 V (+/-5%), VDD_DDR = 1.8 V or 2.5 V (DDR1 or DDR2 mode), and VDD_IO = 3.3 V. Per the datasheet, VDD_CORE must ramp no faster than 30 V/ms and reach stable regulation before VDD_DDR or VDD_IO. Use the NXP MC34712 or equivalent PMIC with monotonic enable sequencing. Bulk-decoupling requires 22 uF polymer + 0.1 uF X7R ceramic within 5 mm of each supply ball cluster; high-speed bypass needs 1 nF 0402 ceramics adjacent to the 667 MHz PLL filter pins.
BGA fanout requires a minimum 0.4 mm via pad with 0.2 mm drill, microvia-in-pad preferred for inner balls. Route all DDR signals as matched-length pairs (DQS-to-DQ within +/- 25 mil at the DRAM), enforce 50 ohm single-ended / 100 ohm differential impedance, and keep DDR traces on inner layers sandwiched between two ground planes. PCI Express lanes require 85 ohm differential impedance with intra-pair skew under 5 mil. Reference the NXP AN4224 layout application note for full stack-up and length-matching guidelines before fab release.
Do not assume that the MPC8377VRALG is a 1:1 software replacement for the MPC8377EVRALG - the SEC 3.3 driver initialization must be conditionally compiled out, otherwise Linux/U-Boot boot halts when probing the absent crypto device tree node. Likewise, do not drop the exposed-pad soldering connection - missing solder joints here are the leading cause of thermal shutdown in field returns. Always verify the JTAG boundary-scan chain after reflow to catch open balls on the power/ground perimeter before applying power.
合规信息
RoHS-compliant per the 'G' suffix in the NXP ordering code. REACH SVHC declarations available in NXP product compliance documentation. Not AEC-Q100 qualified - this is an industrial/commercial communications MPU, not an automotive part. Halogen-free status varies by lot and should be verified per shipment declaration.
