MPC8378EVRAGD - PowerQUICC II Pro MPU 400MHz e300c4s | NXP
料号： MPC8378EVRAGD ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $95.5 | $95.50 |
| 10 | $86.4 | $864.00 |
| 100 | $78.25 | $7,825.00 |
| 500 | $71.1 | $35,550.00 |
| 1,000 | $64.8 | $64,800.00 |
MPC8378EVRAGD 概述
A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, integrating the ALU, control unit, registers, cache, and memory management in a single chip. In embedded systems hierarchies, MPUs are differentiated from microcontrollers (MCUs) by their higher computational throughput, external memory bus, and rich peripheral set. The MPC8378E sits in NXP's PowerQUICC II Pro lineage, between classic PowerQUICC devices and later QorIQ Layerscape SoCs.
Key features include the e300c4s 32-bit PowerPC core with 32 KB L1 instruction and data caches, hardware encryption acceleration, two 10/100/1000 Ethernet MACs with L2 switching support, a DDR memory controller supporting DDR1/DDR2, USB 2.0 host/device, PCI Express interface, and integrated security engines. The device targets secure networking linecards and access equipment.
Architecturally, the MPC8378E couples a high-performance system-on-chip design with the proven QUICC Engine for protocol offload, providing hardware acceleration for Ethernet, ATM, and HDLC/PPP traffic. The integrated security engine supports DES, 3DES, AES, SHA-1/MD5, and public-key algorithms, reducing the BOM cost for VPN and IPsec gateways.
Typical applications include wired broadband gateways, secure VPN routers, industrial control and factory automation controllers, smart-grid substation equipment, linecards for multiservice access platforms, and telecommunications test equipment requiring deterministic serial-protocol handling.
A key design consideration is power dissipation: at 400 MHz with full Ethernet and encryption activity, the device can dissipate several watts; the TEBGA-689 package demands substantial PCB copper pour and thermal vias for reliable operation in fanless enclosures.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： MPC8378EVRAGD ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MPC8378EVRAGD （相同外形与封装尺寸） ——差异在于 Core Architecture, Core Frequency, Memory Controller, Package, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
MPC8378EVRALG
✅ 直接替换📋 参考替代料（不在目录中）
MPC8378CVRAGD
✅ 直接替换📋 参考替代料（不在目录中）
MPC8377EVRAGD
✅ 直接替换📋 参考替代料（不在目录中）
MPC8378ECVRAJFA
✅ 直接替换📋 参考替代料（不在目录中）
MPC8378ECVRANGA
✅ 直接替换✓ 有现货
$65.4 / 个
查看数据手册 →MPC8378EVRAGD 最大额定值与电气特性
| Core Architecture | PowerPC e300c4s |
| Number of Cores | 1 |
| 数据总线宽度 | 32-bit |
| Maximum Clock Speed | 400 MHz |
| Core Frequency | 400 MHz |
| L1 Cache (Instruction) | 32 KB |
| L1 Cache (Data) | 32 KB |
| Memory Controller | DDR1/DDR2 SDRAM |
| Ethernet MACs | 2x 10/100/1000 Mbps |
| 封装 | 689-TEPBGA II (31x31 mm, 1 mm pitch) |
| 安装类型 | Surface Mount (BGA) |
| Security Acceleration | DES / 3DES / AES / SHA / Public-Key |
| USB | USB 2.0 Host/Device |
| RoHS 状态 | Lead Free (per datasheet) |
MPC8378EVRAGD 689-tepbga ii (31x31 mm, 1 mm pitch) 引脚配置指南
MPC8378EVRAGD（689-tepbga ii (31x31 mm, 1 mm pitch) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MPC8378EVRAGD.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MPC8378EVRAGD 适用于 6 应用s: Secure VPN / IPsec Gateway, Wired Broadband Access Router, Industrial Factory Automation Controller, Multiservice Access Linecard, Smart Grid Substation Equipment, Network-Attached Storage Controller.
Secure VPN / IPsec Gateway
The MPC8378EVRAGD is ideal for secure VPN and IPsec gateway designs because its integrated security engine accelerates AES, DES, 3DES, SHA-1, MD5, and public-key algorithms in hardware. Running at 400 MHz, the e300c4s core can sustain over 200 Mbps of IPsec throughput while offloading crypto to dedicated engines. The two gigabit Ethernet MACs enable a typical WAN-to-LAN topology without external switch ICs. The QUICC Engine handles packet classification and SA lookup. Power dissipation at full crypto load reaches 4-5 W, which the 689-TEPBGA II package with thermal vias can dissipate in a fanless chassis.
推荐
Wired Broadband Access Router
For xDSL/PON broadband routers, the MPC8378EVRAGD provides the right balance of compute, networking, and security. Its PCI Express interface connects to a discrete xDSL or GPON PHY, while the dual GbE MACs serve LAN and WAN ports. The DDR1/DDR2 controller supports up to 1 GB of system memory for routing tables and NAT entries. Hardware NAT and QoS acceleration through the QUICC Engine enable wire-speed routing at gigabit line rate. The 400 MHz core clocks Linux or VxWorks networking stacks comfortably for consumer/SMB gateway designs.
推荐
Industrial Factory Automation Controller
In factory automation, the MPC8378EVRAGD serves as a deterministic gateway controller with hardware encryption for secure remote access to PLCs and HMIs. The QUICC Engine offloads Profibus, CAN, and HDLC protocols commonly used in industrial networks. Its 32-bit DDR2 memory bus and PCI Express allow integration of industrial I/O cards and motion-control coprocessors. The wide operating-temperature support and rugged TEBGA II package suit harsh factory-floor environments with vibration and thermal stress. Hardware encryption secures Modbus/TCP, EtherNet/IP, and PROFINET traffic at line rate.
推荐
Multiservice Access Linecard
The MPC8378EVRAGD fits carrier-grade linecards for multiservice access platforms because the QUICC Engine provides simultaneous protocol termination for ATM, HDLC, PPP, and Ethernet. The 400 MHz e300c4s core runs control-plane software stacks while the QUICC Engine handles the data plane, freeing CPU cycles for OAM and signaling. Dual GbE MACs support uplink aggregation and L2 switching for downstream subscribers. PCI Express connects to framer/serializer ICs such as T1/E1 or GPON. Hardware encryption enables secure business VPN services without a dedicated crypto card.
推荐
Smart Grid Substation Equipment
Smart-grid substations use the MPC8378EVRAGD as a secure communication gateway for IEC 61850 GOOSE messaging, DNP3 over IP, and serial SCADA links. The hardware encryption engine secures substation-to-control-center traffic via IPsec tunnels, while the deterministic QUICC Engine processes time-critical GOOSE frames. The dual GbE ports support PRP/HSR redundancy schemes for fault-tolerant substation networks. DDR2 memory provides headroom for storing event logs and fault records. The wide-temp TEBGA II package is rated for substation thermal environments.
推荐
Network-Attached Storage Controller
As a NAS controller, the MPC8378EVRAGD combines a 400 MHz PowerPC core for file-system processing with dual GbE MACs for bonding and link aggregation. PCI Express connects to SATA or SAS controller ICs, while DDR2 memory (up to 1 GB) supports caching for small-file workloads. The hardware encryption engine accelerates AES for at-rest disk encryption with negligible throughput penalty. The QUICC Engine handles iSCSI TCP/IP offload, freeing the core for SMB/NFS protocol processing. The 689-TEPBGA II package and thermal design suit compact NAS enclosures.
推荐
推荐产品汇总
工程参考数据： MPC8378EVRAGD ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8378EVRALG | MPC8378CVRAGD | MPC8377EVRAGD | MPC8378ECVRAJFA | MPC8378ECVRANGA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31 mm) | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same |
| Core Clock Speed | 400 MHz | ~333 MHz (-17%) | 400 MHz (same) | 400 MHz (same) | 400 MHz (same) | 400 MHz (same) |
| Hardware Encryption Engine | Yes (DES/3DES/AES/SHA/RSA/ECC) | Yes | No (non-E variant) | Yes | Yes | Yes |
| SATA Interface | Yes | Yes | Yes | No (MPC8377 lacks SATA) | Yes | Yes |
| Core Architecture | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s |
| Ethernet MACs | 2x 10/100/1000 Mbps | 2x 10/100/1000 Mbps | 2x 10/100/1000 Mbps | 2x 10/100/1000 Mbps | 2x 10/100/1000 Mbps | 2x 10/100/1000 Mbps |
| Approximate Unit Price (qty 1) | $95.50 | Lower (slower speed grade) | Lower (no crypto engine) | Lower (no SATA) | Similar tier | Similar tier |
关键差异点
- Integrated hardware encryption engine （对比 MPC8378CVRAGD)
- Highest speed grade in the family （对比 MPC8378EVRALG)
- SATA interface present （对比 MPC8377EVRAGD)
设计说明
Estimated: at 400 MHz with full Ethernet and encryption activity, the MPC8378EVRAGD dissipates approximately 4-5 W. The 689-TEPBGA II package has theta_JA in the 12-18 C/W range with proper PCB thermal vias, giving a junction temperature rise of 50-90 C above ambient. For fanless enclosures, ensure a minimum 6x6 grid of 0.3 mm thermal vias under the central ball array connected to inner copper planes. Active cooling (small fan or heatsink) is recommended for sealed industrial enclosures above 60 C ambient.
The 689-ball TEBGA II at 1 mm pitch demands a 4-layer or 6-layer PCB with laser-drilled microvias for the inner rows. Route DDR2 traces with controlled impedance (50 ohm single-ended, 100 ohm differential for clocks) and length-match data, address, and command traces within 50 mil of the longest in their byte group. Place 100 nF decoupling capacitors adjacent to every 4-5 power balls to suppress switching transients. Refer to the NXP hardware-design checklist (AN4039) for full routing guidance.
Do not confuse the MPC8378E (with crypto engine) with the MPC8378C (without crypto engine) when ordering; the part numbers differ by only one letter. Always verify RCW (Reset Configuration Word) values match between the AGD and the replacement speed grade before PCB bring-up, as different bins require different DDR2 timing parameters. Confirm supply rails (1.0V core, 1.8V DDR2, 2.5V Ethernet, 3.3V I/O) ramp in the correct sequence per the datasheet power-up requirements to avoid latch-up.
The gigabit Ethernet MACs connect to external PHYs via RGMII; route RGMII traces length-matched to within 50 mils to preserve timing margins. Use series 22 ohm damping resistors at the MAC output to reduce reflections. The PCI Express interface requires 85 ohm differential impedance and AC-coupling capacitors on each transmit pair near the MPC8378EVRAGD balls. The DDR2 data strobe (DQS) and data (DQ) signals must be routed together with matched lengths within each byte lane.
合规信息
Lead-free TEBGA II package per datasheet marking. Not AEC-Q100 qualified (industrial/networking, not automotive).
