MPC8536EAVTAULA557 - PowerQUICC III e500 MPU, 1.333GHz, FCPBGA-783 | NXP
料号： MPC8536EAVTAULA557 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.65 | $2.65 |
| 10 | $2.5 | $25.00 |
| 100 | $2.35 | $235.00 |
| 500 | $2.2 | $1,100.00 |
| 1,000 | $2.05 | $2,050.00 |
MPC8536EAVTAULA557 概述
A PowerPC embedded processor is a RISC microprocessor architecture originally derived from the POWER ISA, widely used in networking equipment, storage controllers, and industrial control where deterministic performance and long lifecycle support matter. The e500 core is a superscalar implementation that supports out-of-order execution, branch prediction, and MMU-based virtualization, placing the PowerQUICC III family between classical PowerPC 603/604 derivatives and the later QorIQ P-series devices.
Key features of the MPC8536EAVTAULA557 include an integrated DDR2 memory controller, dual 10/100/1 Gb Ethernet MACs, PCI Express interface, four DMA channels, SPI and I2C controllers, and dedicated security engines (SEC 3.0) for IPsec and SSL/TLS offload. The 783-FCPBGA package provides high pin density for the parallel DDR2 data bus plus multiple high-speed serial interfaces. The device supports industrial operating temperature ranges, which is critical for outdoor networking and factory automation deployments.
Architecturally, the MPC8536E integrates the e500 core with a 256 KB L2 cache, a 32 KB instruction cache, and a 32 KB data cache. The system interface unit aggregates four GbE ports via SerDes lanes, plus a PCI Express x4 interface, allowing direct attachment to switch fabrics or PHY devices. This level of integration eliminates external bridge chips that would otherwise be required to connect a CPU to high-speed networking silicon.
Typical applications include industrial routers, network-attached storage (NAS) controllers, telecom line cards, secure VPN gateways, and factory automation controllers. In VPN gateways, the integrated SEC 3.0 engine offloads AES, 3DES, SHA, and MD5 operations, freeing the e500 core for control and management plane tasks. In NAS platforms, the combination of DDR2 controller with GbE ports enables line-rate gigabit throughput for small-to-medium business file serving.
When designing with the MPC8536EAVTAULA557, pay close attention to power sequencing, DDR2 IBIS matching, and SerDes reference clock quality. The 29 mm x 29 mm FCPBGA requires a multilayer PCB with controlled-impedance routing for DDR2 signals and matched-length SerDes pairs. The 'AVT' designator indicates a specific junction temperature grade verified against NXP's thermal characterization data.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including a parametric comparison against equivalent PowerQUICC III and entry-level QorIQ devices.
直接替换替代料： MPC8536EAVTAULA557 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MPC8536EAVTAULA557 （相同外形与封装尺寸） ——差异在于 Core Architecture, Mounting Type, Package, L1 Cache, L2 Cache.
快速对比工具——选择替代料号进行并排对比：
MPC8536EAVTAULA
✅ 直接替换✓ 有现货
$115.6 / 个
查看数据手册 →MPC8536EAVTALG
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8536EAVTANG
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$85.4 / 个
查看数据手册 →MPC8536EAVTAQH
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8536EAVTAKK
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC8536EAVTAULA557 最大额定值与电气特性
| Core Architecture | PowerPC e500 |
| Family | PowerQUICC III (MPC85xx) |
| Number of Cores | 1 |
| Data Width | 32-bit |
| Maximum Core Frequency | 1.333 GHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| L2 Cache | 256 KB |
| 封装 | 783-FCPBGA (29 mm x 29 mm) |
| 安装类型 | Surface Mount |
| Memory Controller | DDR2 with ECC support |
| Ethernet MACs | Dual 10/100/1 GbE |
| PCI Express | PCIe x4 |
| Security Engine | SEC 3.0 (AES, 3DES, SHA, MD5) |
| DMA Channels | 4 |
MPC8536EAVTAULA557 783-fcpbga (29 mm x 29 mm) 引脚配置指南
MPC8536EAVTAULA557（783-fcpbga (29 mm x 29 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MPC8536EAVTAULA557.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MPC8536EAVTAULA557 适用于 6 应用s: Industrial VPN Gateway, Network-Attached Storage (NAS) Controller, Telecom Line Card Processor, Factory Automation Controller, Secure Edge Router, Print and Imaging Controller.
Industrial VPN Gateway
The MPC8536EAVTAULA557 is well suited to industrial VPN gateway designs because the integrated SEC 3.0 engine offloads AES, 3DES, SHA-1/256, and MD5 from the e500 core, sustaining line-rate IPsec across dual GbE MACs. At 1.333 GHz the e500 core handles routing daemons (Quagga, FRR), management plane (SNMP, NETCONF), and tunnel setup with margin. The 32-bit e500 MMU supports standard Linux/RTOS networking stacks without proprietary BSP glue. Power dissipation at 1.333 GHz is held within an industrial-grade thermal envelope suitable for fanless DIN-rail chassis.
推荐
Network-Attached Storage (NAS) Controller
For small-to-medium business NAS, the MPC8536EAVTAULA557's DDR2 controller with ECC provides reliable memory for filesystem journaling, while the dual GbE MACs aggregate LACP link groups for line-rate file throughput. SEC 3.0 accelerates SMB3 and iSCSI encryption without CPU bottlenecks. The e500 core runs typical NAS software stacks (NAS4Free, custom ARM/x86 emulation layers) efficiently within 1.333 GHz headroom. FCPBGA-783 enables the dense parallel DDR2 routing required for sustained 1 GBps filesystem benchmarks in 4-bay to 8-bay enclosures.
推荐
Telecom Line Card Processor
In telecom line cards, the MPC8536EAVTAULA557 acts as a control-plane processor aggregating DSL/PON framer traffic via PCI Express to a fabric ASIC. The e500 core runs RTOS or Linux control stacks managing L2/L3 switching, QoS, and OAM functions. Hardware-accelerated SEC 3.0 supports MACsec and IPsec on backhaul links. The industrial temperature grade and long lifecycle make the part ideal for carrier infrastructure with multi-year deployment cycles. ECC on DDR2 ensures data integrity for control packets where silent corruption would cause network instability.
推荐
Factory Automation Controller
The MPC8536EAVTAULA557 fits factory automation controller roles where deterministic networking and ruggedized operation are required. Its GbE MACs support EtherCAT, PROFINET, and EtherNet/IP slave stacks, while PCI Express connects to industrial I/O or motion-control ASICs. The e500 MMU and interrupt controller support real-time Linux with PREEMPT_RT for deterministic control loops. SEC 3.0 enables secure remote management and signed firmware updates critical for OT/IT convergence in Industry 4.0 deployments. Industrial temperature screening supports operation in -40C to +85C enclosures.
推荐
Secure Edge Router
The MPC8536EAVTAULA557 is a strong fit for branch-office secure edge routers where integrated hardware crypto and dual GbE matter most. The SEC 3.0 engine sustains multiple concurrent IPsec tunnels (site-to-site VPN, remote-access SSL) at gigabit line rate, leaving the e500 core free for routing, NAT, and policy enforcement. The PCI Express interface connects to external Wi-Fi 6 or 5G modems, while DDR2 with ECC supports flow-table memory for stateful firewalls. Industrial temperature and long-lifecycle availability suit remote/edge installations with multi-year field life.
推荐
Print and Imaging Controller
In high-end multifunction printers and production imaging systems, the MPC8536EAVTAULA557 acts as the main controller orchestrating scanner, print engine, and network interfaces. The e500 core handles image processing pipelines (JPEG, JBIG2, PDF rendering), while DDR2 with ECC holds large image buffers. Dual GbE MACs support concurrent print-server and scanner-client traffic. SEC 3.0 enables IPsec-secured network printing and access control for confidential documents in enterprise and government environments.
推荐
推荐产品汇总
工程参考数据： MPC8536EAVTAULA557 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8536EAVTAULA | MPC8536EAVTALG | MPC8536EAVTANG | MPC8536EAVTAQH | MPC8536EAVTAKK |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Core Architecture | PowerPC e500 | PowerPC e500 - same | PowerPC e500 - same | PowerPC e500 - same | PowerPC e500 - same | PowerPC e500 - same |
| Data Width | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Security Engine | SEC 3.0 | SEC 3.0 - same | SEC 3.0 - same | SEC 3.0 - same | SEC 3.0 - same | SEC 3.0 - same |
| Memory Controller | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC |
| Ethernet MACs | Dual 10/100/1 GbE | Dual 10/100/1 GbE | Dual 10/100/1 GbE | Dual 10/100/1 GbE | Dual 10/100/1 GbE | Dual 10/100/1 GbE |
关键差异点
- Integrated SEC 3.0 hardware crypto engine （对比 MPC8536AVTAULA (non-E variant))
- Highest 1.333 GHz speed grade in MPC8536 family （对比 MPC8536EAVTALG / MPC8536EAVTANG (lower bins))
- Extended screening '557' suffix for reliability （对比 MPC8536EAVTAULA)
设计说明
The 783-FCPBGA package at 1 mm ball pitch requires a multilayer PCB (typically 8-12 layers) with laser-drilled or microvia construction to fan out the dense ball grid. Matched-length routing is mandatory for DDR2 data, address, and control signals; follow the NXP layout checklist in the MPC8536E design guide for trace width, spacing, and via count. Place decoupling capacitors on the bottom side of the BGA using a via-in-pad pattern to minimize loop inductance for the high-current e500 core transients.
The MPC8536EAVTAULA557 requires multiple power rails (core, DDR2 I/O, SerDes analog, Ethernet PHY, GPIO) with strict sequencing rules documented in the hardware specifications. Use a multi-rail PMIC or discrete regulators with power-on-reset (POR) tracking; failure to sequence core before I/O can latch-up the device. Decouple each rail with a combination of bulk, mid-frequency, and high-frequency capacitors placed as close as possible to the corresponding balls.
The SerDes lanes for GbE and PCI Express require a clean reference clock with sub-ppm jitter to meet IEEE 802.3 and PCI-SIG compliance. Route SerDes differential pairs with 100 ohm differential impedance and keep stubs below 0.1 mm; reference the NXP SerDes routing guideline. The DDR2 clock pair should be length-matched to within 25 mil to maintain timing margin across temperature. Series AC-coupling capacitors on SerDes lines must use 0402 or smaller packages to preserve 6 GHz+ bandwidth.
Estimated: at 1.333 GHz with full GbE + DDR2 + SEC utilization, the device can dissipate up to 6-8 W. Use a 4-layer or 6-layer PCB with continuous ground planes and thermal vias under the FCPBGA to keep junction temperature within the operating range. For fanless industrial enclosures, attach a small finned heatsink with thermal interface material rated for at least 5 W/mK. Verify junction temperature in worst-case ambient using the NXP thermal model or board-level CFD simulation.
Do not enable the e500 core before DDR2 has stabilized - the DDR2 controller's initialization sequence must complete before any DRAM access. Watch out for the JTAG TAP reset behavior: a warm reset without power cycling can leave the SEC 3.0 engine in an undefined state. Always validate with NXP's latest errata document; the MPC8536E has had multiple revisions addressing DDR2 timing and SerDes initialization. Use only NXP-validated DDR2 DIMMs from the qualified-vendor list to avoid training failures.
合规信息
Compliance flags not present in the verified web data. Refer to the NXP MPC8536E datasheet and product-change-notification documents for the most current RoHS, REACH, and lead-free status. AEC-Q100 is not applicable for a high-pin-count networking MPU.