MPC8569EVJAUNLB - PowerQUICC III SoC, 1.333 GHz e500, 783-FCPBGA | NXP
料号： MPC8569EVJAUNLB ✗ 停产MPC8569EVJAUNLB 概述
A PowerQUICC processor is a family of Power Architecture-based communications processors designed by Freescale (now NXP) to consolidate control-plane and data-plane processing for routers, base stations, and access multiplexers. The MPC8569E specifically extends the QorIQ/PowerQUICC lineage by pairing a fast e500v2 CPU with serial interconnect IP that replaces parallel local buses, while still maintaining TDM support through the QUICC Engine subsystem.
Key features include 1.333 GHz core frequency, 72-bit (64-bit + ECC) DDR2/DDR3 memory controller up to 800 MT/s, integrated Security Engine with AES, 3DES, RSA, and elliptic-curve acceleration, dual GbE with SGMII support, two PCI Express interfaces, two Serial RapidIO interfaces, and the Universal Serial QUICC Engine for multi-protocol bridging. Operating voltage rails include 1.5 V, 1.8 V, 2.5 V, and 3.3 V rails sourced through a sequenced power scheme.
The MPC8569E uses a 783-ball FCBGA package with a thermal resistance of approximately 12-15 C/W and requires a heatsink for sustained 1.333 GHz operation. The e500v2 core executes Power Architecture Book E instructions with a double-precision FPU, MMU with 32-bit virtual addressing, and hardware-accelerated table-walk for high-TLB-miss workloads such as routing lookups.
Typical applications include 3G/WiMAX/LTE base station controllers, radio network controllers (RNC), multi-service gateways, ATM/TDM/IP aggregation switches, and secure industrial routers. The integrated SEC and QUICC Engine make it well suited to IPsec VPN concentrators and protocol-conversion appliances bridging legacy TDM to packet networks.
When designing with this device, ensure the DDR2/DDR3 routing follows the JEDEC-controlled-impedance guidelines and that the SERDES reference clocks use a low-jitter oscillator. The QUICC Engine microcode must be loaded from NAND/NOR at boot; an appropriate boot sequencer or board support package is required to initialize SERDES lanes and PCIe endpoints.
直接替换替代料： MPC8569EVJAUNLB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
MPC8569EVJAUJLB
✅ 直接替换📋 参考替代料（不在目录中）
MPC8568EVJAQND
✅ 直接替换📋 参考替代料（不在目录中）
MPC8569EVJAUNLB 最大额定值与电气特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC III |
| Core Architecture | Power Architecture e500v2 |
| Core Count | 1 |
| 数据总线宽度 | 32-bit |
| Maximum Core Frequency | 1.333 GHz |
| L2 Cache | 512 KB |
| 工作温度 | 0C to +105C |
| 电源电压 | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| 封装 | 783-FCPBGA (29x29 mm) |
| Process Technology | 0.04 micron CMOS |
| Memory Controller | DDR2/DDR3 with ECC (64-bit + 8-bit ECC, up to 800 MT/s) |
| Security Engine | SEC with AES, 3DES, RSA, ECC |
| Ethernet | Dual 10/100/1000 Mb/s with SGMII |
| Serial Interfaces | 2x PCI Express, 2x Serial RapidIO |
| Communications Engine | QUICC Engine with multiple TDM/UTOPIA/POS interfaces |
| 安装类型 | Surface Mount (FCBGA) |
MPC8569EVJAUNLB 783-fcpbga (29x29 mm) 引脚配置指南
MPC8569EVJAUNLB（783-fcpbga (29x29 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： MPC8569EVJAUNLB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MPC8569EVJAUNLB 适用于 6 应用s: 3G/WiMAX/LTE Base Station Controller, Radio Network Controller (RNC), Multi-Service Gateway, ATM/TDM/IP Aggregation Switch, IPsec VPN Concentrator, Industrial Secure Router.
3G/WiMAX/LTE Base Station Controller
The MPC8569EVJAUNLB's 1.333 GHz e500v2 core and dual GbE with SGMII deliver line-rate processing for base station controllers and Node B aggregation equipment. Its 72-bit DDR2/DDR3 controller with ECC up to 800 MT/s maintains low-latency access to routing tables and bearer buffers. The integrated Security Engine accelerates AES/3DES/RSA operations required for IPSec tunnels between eNodeB and the core network.
推荐
Radio Network Controller (RNC)
For radio network controller deployments, the MPC8569EVJAUNLB provides the combination of a 32-bit Power Architecture core, Serial RapidIO for backplane interconnect, and the QUICC Engine for legacy Abis/ATM traffic. Its hardware offload engines leave the e500v2 core available for RRC, NBAP, and Iu-CS signaling stacks. The 783-FCPBGA package supports extended 0-105C operation required in central-office installations.
推荐
Multi-Service Gateway
Multi-service gateway platforms leverage the MPC8569EVJAUNLB's dual PCI Express lanes to attach Ethernet and DSL line-card controllers while routing traffic through SGMII up-links. The QUICC Engine handles legacy TDM/Frame Relay while the SEC terminates IPsec VPN sessions. 512 KB of L2 cache combined with DDR3 at 800 MT/s supports deep packet inspection queues at 1+ Mpps.
推荐
ATM/TDM/IP Aggregation Switch
Aggregation switches built on the MPC8569EVJAUNLB use the QUICC Engine to terminate ATM PVCs and TDM trunks while the e500v2 core handles IP forwarding. Serial RapidIO links carry switch fabric traffic to line cards, and the integrated SEC ensures that aggregation uplinks remain encrypted across administrative boundaries. The 783-FCPBGA footprint is shared with the MPC8568 family for design reuse.
推荐
IPsec VPN Concentrator
In IPsec VPN concentrator designs, the MPC8569EVJAUNLB's Security Engine accelerates AES-256 and 3DES operations at multi-gigabit line rate, while the e500v2 core handles IKE key exchange and policy lookup. Dual GbE with SGMII provides clear-text and encrypted network segments without external MAC devices. The 783-FCPBGA package allows dense multi-port chassis assemblies.
推荐
Industrial Secure Router
The MPC8569EVJAUNLB's 0-105C industrial temperature grade and hardware SEC make it a strong fit for industrial sites requiring IPsec-encrypted SCADA backhauls. Two PCI Express lanes host 4-port Ethernet controllers, and Serial RapidIO connects to local PLCs and I/O modules. Combined with a hardened U-Boot or VxWorks BSP, the device delivers deterministic routing latency below 50 microseconds.
推荐
推荐产品汇总
工程参考数据： MPC8569EVJAUNLB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MPC8569EVJAUJLB | MPC8568EVJAQND |
|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 1.333 GHz | 1.0 GHz | 1.0 GHz |
| Core Architecture | e500v2 | e500v2 | e500v2 |
| L2 Cache | 512 KB | 512 KB | 256 KB |
| Security Engine (SEC) | Yes (AES, 3DES, RSA, ECC) | Yes | No |
| Memory Controller | DDR2/DDR3 ECC up to 800 MT/s | DDR2/DDR3 ECC up to 800 MT/s | DDR2 ECC up to 533 MT/s |
| PCIe Lanes | 2 | 2 | 1 |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C |
关键差异点
- Highest speed grade in the MPC8569E family （对比 MPC8569EVJAUJLB)
- Integrated Security Engine （对比 MPC8568EVJAQND)
- DDR3 800 MT/s with ECC （对比 MPC8568EVJAQND)
设计说明
Estimated: at 1.333 GHz in the 783-FCPBGA package, power dissipation typically falls in the 5-8 W range. With a typical theta_JA of 12-15 C/W, junction temperature can rise 60-100C above ambient in still air. Use an extruded aluminum heatsink (1U-2U pitch) plus thermal interface material, or forced-air cooling, to keep Tj below 105C.
The DDR2/DDR3 interface operates up to 800 MT/s with 64-bit + ECC - route address and data groups with matched length, 50-ohm controlled impedance, and VTT termination per JEDEC. Reference the NXP AN-3530 style layout guidance and run SI simulation before committing the stackup. SERDES SGMII and Serial RapidIO lanes require 100-ohm differential routing with length matching.
The MPC8569EVJAUNLB requires a sequenced power-on (1.5V, 1.8V, 2.5V, 3.3V) per the NXP datasheet; out-of-order ramps can latch up the SERDES or reset logic. Ensure the boot sequencer loads the QUICC Engine microcode image from NOR/NAND before attempting TDM/ATM bring-up. Verify e500v2 JTAG header isolation on production boards to avoid debug-mode lockouts.
Reference clocks for SERDES must come from a low-jitter (<1 ps RMS) oscillator, with a clean supply via ferrite bead and decoupling capacitors. Improper clock source selection on the MPC8569EVJAUNLB will degrade SGMII and Serial RapidIO link margin. Series-terminate clock outputs near the driver to avoid reflections on long traces.
合规信息
Compliance status was not present in the Verified Web Data excerpts; designers should request the latest material declaration from NXP before declaring compliance for production builds.