Texas Instruments

MSP430F5132IDA - 25MHz Mixed-Signal MCU | Texas Instruments

料号: MSP430F5132IDA ✓ 量产中
38-pin TSSOP (DA) Package 25 MHz Speed 8 KB (8K x 8) Memory
最小起订量: 1 |

MSP430F5132IDA 概述

Texas Instruments MSP430F5132IDA is a 25 MHz mixed-signal microcontroller with 8 KB flash memory, 1 KB SRAM, a 10-bit ADC, comparator, DMA, and a 16-bit high-resolution timer, housed in a 38-pin TSSOP (DA) package. The industrial-temperature device supports operation from -40°C to +85°C.

An MSP430 mixed-signal microcontroller combines a low-power RISC processor, embedded analog conversion, timers, and event-driven peripherals in one device. The MSP430 architecture belongs to the microcontroller hierarchy and is designed for compact embedded systems that must perform control, measurement, and communication functions while minimizing energy use. This integration reduces component count in battery-powered instruments, industrial controls, and sensing equipment.

Three principal capabilities define the MSP430F5132IDA. Its 25 MHz CPU provides processing headroom for control algorithms, while 8 KB flash preserves firmware and 1 KB SRAM supports working data. The 10-bit ADC permits direct analog measurement, and the on-chip comparator can support threshold detection and low-power signal monitoring without relying entirely on external converters.

The device also integrates DMA and a 16-bit high-resolution timer. DMA can move data between memory and peripherals while the CPU performs other tasks, reducing processing overhead in acquisition and control systems. The high-resolution timer supports precise timing, pulse measurement, and periodic event generation, which are important in metering, motor-control, and industrial automation equipment.

Typical uses include sensor nodes, portable measurement instruments, industrial process controls, low-power monitoring equipment, and embedded data-acquisition systems. The combination of local analog conversion, DMA, and 16-bit timing is particularly useful when measurements must be acquired consistently without burdening the main control loop. The 38-pin TSSOP package also supports compact PCB layouts where a large thermal pad would be unnecessary.

When designing around this MCU, verify the required analog voltage range and pin multiplexing before assigning ADC or comparator inputs. Place decoupling capacitors close to the supply pins, preserve the intended analog and digital grounding strategy, and confirm programming and debug access on every assembled board. The manufacturer datasheet should govern operating voltages, clock setup, pin multiplexing, and programming-test requirements.

This page combines the MSP430F5132IDA ordering information, verified electrical and packaging characteristics, practical design guidance, and qualified same-footprint alternatives. It also distinguishes pin-compatible replacements from functional alternatives that require different packages or peripherals, helping engineers simplify sourcing without overlooking firmware, memory, or analog-interface constraints.

直接替换替代料: MSP430F5132IDA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: MSP430F5132IDA (相同外形与封装尺寸) ——差异在于 Comparator, Operating Temperature Range, RoHS Status.

Texas Instruments
Comparator: Yes (integrated)
Operating Temperature Range: -40 C to +85 C (Industrial)
RoHS Status: Compliant
对比 MSP430F5132IDA →

MSP430F5131IDAR

✅ 直接替换
📦 TSSOP-38 (DA)
25 MHz operating class matches the MSP430F5132IDA with 0% maximum-clock difference; memory and peripheral differences are .

📋 参考替代料(不在目录中)

MSP430F5152IDAR

✅ 直接替换
Texas Instruments
📦 TSSOP-38 (DA)
MSP430 16-bit RISC · 25 MHz · 16 KB · 2 KB · 2.4 V to 3.6 V · 10-bit SAR, integrated · Yes (integrated) · 4-channel

联系询价

查看数据手册 →

MSP430F5172IDA

✅ 直接替换
📦 TSSOP-38 (DA)
Shares the documented 38-pin TSSOP package; maximum-frequency, memory, and peripheral differences are .

📋 参考替代料(不在目录中)

MSP430F5132IDA 最大额定值与电气特性

Product Type Mixed-Signal Microcontroller (MCU)
CPU Architecture 16-bit MSP430 RISC
Maximum CPU Frequency 25 MHz
Flash Memory 8 KB (8K x 8)
Static RAM 1 KB
ADC Resolution 10 bit
Comparator Integrated
DMA Controller Integrated
High-Resolution Timer 16 bit
工作温度范围 -40°C to +85°C
封装 38-pin TSSOP (DA)
Package Width 6.10 mm
Package Length 0.240 inch (6.10 mm)
安装类型 Surface Mount
Timer Resolution 16 bit
RoHS 状态 unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

MSP430F5132IDA 0.240 inch (6.10 mm) 引脚配置指南

MSP430F5132IDA(0.240 inch (6.10 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MSP430F5132IDA 的 0.240 inch (6.10 mm) 封装引脚图

暂无详细引脚数据: MSP430F5132IDA.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MSP430F5132IDA 适用于 6 应用s: Industrial Sensor Monitoring, Portable Data Acquisition, Low-Power Threshold Detection, Digital Power and Process Control, Precision Timing and Event Control, Battery-Powered Embedded Control.

🏭

Industrial Sensor Monitoring

The MSP430F5132IDA fits compact sensor-monitoring nodes that need local measurement and deterministic control without a separate ADC. Its 10-bit ADC can digitize analog sensor signals, while the comparator provides a hardware threshold function for detecting limits or state changes. The 16-bit high-resolution timer supports periodic acquisition and elapsed-time measurement, and DMA can transfer conversion or peripheral data with reduced CPU intervention. In a 38-pin TSSOP design, these functions preserve board area while keeping the processing core at 25 MHz. Designers should assign analog inputs according to the manufacturer pin table, maintain a clean analog supply path, and validate the ADC range and sampling behavior against the sensor output before calibration.

📱

Portable Data Acquisition

MSP430F5132IDA supports portable measurement systems where size, energy use, and local signal processing are important. The 25 MHz processor can execute acquisition logic, filtering, and control routines, while 8 KB flash stores firmware and 1 KB SRAM provides working space for short data buffers. DMA is useful for moving sampled data between memory and peripherals, and the 16-bit high-resolution timer can establish precise sampling intervals. Its integrated 10-bit ADC also reduces the component count of a compact instrument. For portable operation, configure unused peripherals and pins for minimum activity, select the appropriate clock mode, and verify supply-voltage and sensor-input limits from the manufacturer datasheet before defining the battery budget.

🧩

Low-Power Threshold Detection

The MSP430F5132IDA is well suited to threshold-based monitoring because it combines an integrated comparator with a 10-bit ADC and a 16-bit timer. The comparator can monitor a signal continuously, while the ADC provides finer measurement when the monitored condition changes or when calibration data is required. The timer can implement sampling intervals, debounce delays, and periodic wake-ups, and DMA can reduce interrupt overhead during data movement. This arrangement is useful in equipment that must remain responsive while using little energy. Firmware should define a safe startup sequence, account for comparator hysteresis and filtering, and ensure that the selected analog pins remain compatible with other board functions.

⚡

Digital Power and Process Control

MSP430F5132IDA can serve as the central controller in a small industrial process-control module. Its 25 MHz CPU handles supervisory logic, the comparator supports fast threshold decisions, and the 10-bit ADC closes a feedback loop for analog process variables. The integrated DMA improves data movement between memory and peripherals, while the 16-bit high-resolution timer supports precise control and actuation timing. For process applications, choose sensor and actuator interfaces that remain within the MCU's documented electrical limits, isolate analog and digital return currents, and include protection against industrial transients. Firmware should include startup, watchdog-style recovery, sensor validation, and safe output states so a reset does not create an unsafe process condition.

🔧

Precision Timing and Event Control

The MSP430F5132IDA is appropriate for compact products whose operation depends on accurate intervals and event sequencing. Its 16-bit high-resolution timer can generate or measure timing windows, and the 25 MHz CPU can coordinate multiple peripheral events without excessive complexity. The comparator and 10-bit ADC can monitor the physical condition associated with each event, creating a combined timing-and-measurement subsystem. This pattern suits motor timing, pulse sensing, metering, and sequence-control products. Design work should begin with the manufacturer's timer and clock documentation, ensuring that timer inputs, capture functions, and interrupt priorities are assigned correctly. Firmware must also account for clock tolerance when multiple timed events must remain synchronized.

🔋

Battery-Powered Embedded Control

MSP430F5132IDA gives a battery-powered product local control and measurement without requiring a larger mixed-signal processor package. Its event-oriented MSP430 architecture can remain idle while waiting for sensor, comparator, or timer events, and the integrated 10-bit ADC allows direct measurement from suitable analog inputs. The 25 MHz CPU provides enough performance for control and communication routines, while DMA can reduce CPU activity during transfers. The 38-pin TSSOP package is useful for compact products where a QFN thermal pad would add unnecessary assembly complexity. Battery life should be calculated from the selected operating mode, clock frequency, analog-conversion rate, and external sensor current rather than from CPU frequency alone.

What is the MSP430F5132IDA?
The MSP430F5132IDA is a 25 MHz, 16-bit mixed-signal microcontroller with 8 KB flash, 1 KB SRAM, a 10-bit ADC, comparator, DMA, and a 16-bit high-resolution timer. According to the Texas Instruments product page, it is packaged in a 38-pin TSSOP (DA) and rated for industrial temperatures from -40°C to +85°C.
What are the key specifications of MSP430F5132IDA?
The MSP430F5132IDA combines a 25 MHz MSP430 CPU, 8 KB flash, 1 KB SRAM, 10-bit ADC, comparator, DMA, and a 16-bit high-resolution timer. The Texas Instruments manufacturer datasheet identifies a 38-pin TSSOP (DA) package and an industrial operating range of -40°C to +85°C, making the device suitable for compact embedded measurement and control designs.
What is the operating temperature range of MSP430F5132IDA?
The MSP430F5132IDA operates from -40°C to +85°C. Texas Instruments lists the DA package configuration for industrial-temperature use, while the product description identifies the MCU as a 25 MHz mixed-signal device with 8 KB flash, 1 KB SRAM, a 10-bit ADC, comparator, DMA, and a 16-bit high-resolution timer.
Where can I download the MSP430F5132IDA datasheet PDF?
The official MSP430F5132 documentation is available from the Texas Instruments product page at https://www.ti.com/product/MSP430F5132. Select the MSP430F5132IDA ordering option for the 38-pin TSSOP (DA) configuration and use the linked technical documentation for electrical characteristics, pin descriptions, memory organization, and application guidance.
Where can I find the MSP430F5132IDA pinout?
The MSP430F5132IDA pinout is documented in the pin-description tables of the Texas Instruments manufacturer datasheet. The device uses a 38-pin TSSOP (DA) package with industrial-temperature ordering code DA. Use those tables when assigning power, ground, reset, clock, analog inputs, and programming signals to PCB tracks.
Where can I buy MSP430F5132IDA online?
Use the Request a Quote form on this XAIPART product page to request MSP430F5132IDA availability, packaging details, and a current commercial quotation. The part is identified as an industrial-temperature, 38-pin TSSOP device with a 25 MHz CPU, 8 KB flash, and 1 KB SRAM; current lead time and allocation should be confirmed through the quotation process.
What is the price of MSP430F5132IDA?
Current commercial terms for MSP430F5132IDA are available through the Request a Quote form on this page. The structured listing records a unit-price reference, but the displayed purchasing amount is calculated dynamically and should not be inferred from an archived or memory-derived figure. Submit the exact MPN and required quantity to obtain a current quotation.
What is the lead time for MSP430F5132IDA?
Request the current MSP430F5132IDA lead time through the Request a Quote form on this page. Texas Instruments identifies the device as an active MSP430F5xx product with an industrial-temperature 38-pin TSSOP configuration, but manufacturing availability and order allocation can vary with quantity, packaging, and procurement conditions.
Is MSP430F5132IDA in stock?
Current MSP430F5132IDA inventory should be confirmed through the Request a Quote form on this page. The manufacturer product page lists the exact MSP430F5132IDA ordering configuration, while market availability can change independently of the device's lifecycle status. Include the required quantity, package form, and target delivery date in the request.
MSP430F5132IDA vs MSP430F5131IDAR - which is better for a pin-compatible upgrade?
MSP430F5131IDAR is the closer same-footprint option when an existing 38-pin TSSOP design must remain unchanged. The available cross-reference identifies consistent terminals, packages, and principal performance characteristics, while also showing a 25 MHz operating class for the F5131 variant. Firmware and peripheral-level differences must still be reviewed before production substitution.
What is the difference between MSP430F5132IDA and MSP430F5172IDA?
MSP430F5172IDA is a same-footprint MSP430F5xx option identified by the 38-pin TSSOP comparison listing, but it is not an identical ordering code for MSP430F5132IDA. According to Texas Instruments device documentation, peripheral sets and memory configurations can vary within the MSP430F5xx family, so verify ADC channels, timers, communication interfaces, firmware support, and interrupt assignments before replacement.
When should I choose MSP430F5132IDA over MSP430F5131IDAR?
Choose MSP430F5132IDA when the design specifically requires its documented 8 KB flash, 1 KB SRAM, 10-bit ADC, comparator, DMA, and 16-bit high-resolution timer configuration. Choose MSP430F5131IDAR only after checking that its memory map and peripheral set meet the original design requirements and that the existing 38-pin TSSOP layout remains electrically compatible.
Is MSP430F5132IDA suitable for low-power sensor and industrial control applications?
The MSP430F5132IDA is suitable for sensor and industrial-control designs that benefit from integrated measurement, event-driven control, and compact packaging. Its 10-bit ADC, comparator, DMA, and 16-bit high-resolution timer reduce the need for separate support components. Final power performance depends on the selected clock, peripheral configuration, operating mode, and voltage range.
What can replace MSP430F5132IDA?
The strongest documented replacements are the Texas Instruments MSP430F5131IDAR, MSP430F5152IDA, and MSP430F5172IDA because they are associated with compatible 38-pin TSSOP alternatives. Treat each as a conditional drop-in: review power pins, ADC assignments, timers, communication peripherals, memory limits, clock configuration, and software initialization before approving a replacement.
What is the best equivalent for MSP430F5132IDA?
No universal equivalent can be selected from the documented cross-references without reviewing the complete peripheral map. For a board-level substitution, MSP430F5131IDAR is the most directly identified same-package candidate, while MSP430F5152IDA and MSP430F5172IDA require confirmation of their memory and mixed-signal peripherals. MCU migration also requires firmware and debug-tool compatibility checks.

工程参考数据: MSP430F5132IDA ——对比、设计指导和合规信息。

选型指南

Choose MSP430F5132IDA when a design requires a compact 25 MHz MSP430 controller with 8 KB flash, 1 KB SRAM, a 10-bit ADC, comparator, DMA, and a 16-bit high-resolution timer. It is especially suitable for sensor acquisition, threshold detection, timing control, and portable industrial products that benefit from mixed-signal integration. Consider MSP430F5131IDAR when its memory and peripheral configuration satisfy the design and a same-footprint MSP430 family substitution is required. Evaluate MSP430F5152IDA and MSP430F5172IDA only after checking their exact memory, ADC, timer, communications, and pin-multiplexing characteristics. None should be treated as a transparent firmware replacement: recompile the application, verify interrupt and peripheral assignments, and test the complete board. For new designs requiring substantially more memory or peripheral bandwidth, choosing a larger MCU may be preferable to forcing a limited 8 KB flash platform.

与替代料对比

参数 本产品 MSP430F5131IDAR MSP430F5152IDA MSP430F5172IDA
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-38 (DA) TSSOP-38 (DA) TSSOP-38 (DA) TSSOP-38 (DA)
CPU Architecture 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC

关键差异点

  • Integrated mixed-signal resources reduce external support components (对比 MSP430F5172IDA)
  • Documented 25 MHz processing class supports responsive local control (对比 MSP430F5131IDAR)
  • Industrial-temperature TSSOP implementation supports compact embedded boards (对比 MSP430F5152IDA)

设计说明

Place all supply bypass capacitors directly beside the corresponding power and ground pins, with the shortest possible current-loop area. Keep analog input traces away from switching nodes and high-current return paths. The 38-pin TSSOP footprint has limited pin spacing, so inspect the manufacturer land pattern and maintain adequate solder-mask clearance between adjacent leads during fine-pitch assembly.

Assign ADC and comparator signals before fixing the printed-circuit-board layout because multiplexed peripheral functions can constrain pin selection. Route sensitive analog inputs over a continuous ground plane, use a quiet analog reference strategy, and isolate analog return currents from digital and actuator currents. Verify the selected pin multiplexing and analog input limits in the manufacturer datasheet.

Do not treat a same-package family member as a guaranteed drop-in replacement without checking memory size, ADC channels, timer instances, communication peripherals, interrupt vectors, and clock initialization. The 8 KB flash and 1 KB SRAM limits of MSP430F5132IDA also require firmware sizing and linker-map review. A replacement should be approved only after compiling and testing the complete firmware.

Validate the complete power tree against the manufacturer's operating-voltage limits before powering the board. Check the voltage at the MCU pins during startup, ADC conversion, comparator operation, and maximum processor activity. For low-power products, calculate the average current from clock mode, conversion rate, peripheral activity, and external sensor loads rather than using a single operating-mode figure.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The device is an industrial-temperature microcontroller, not an automotive-qualified AEC-Q100 variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited technical results.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MSP430F5132IDA datasheet MSP430F5132IDA datasheet pdf MSP430F5132IDA pinout Texas Instruments MSP430F5132IDA MSP430F5132IDA specifications MSP430F5132IDA 25MHz 8KB flash MSP430F5132IDA TSSOP-38 MSP430F5132IDA replacement MSP430F5132IDA equivalent MSP430F5132IDA vs MSP430F5131IDAR MSP430F5132IDA price MSP430F5132IDA stock

相关元器件 & 术语

Texas Instruments MSP430F5132 MSP430F5132IDA MSP430F5131IDAR MSP430F5152IDA MSP430F5172IDA MSP430 mixed-signal microcontroller RISC microcontroller embedded microcontroller semiconductor 10-bit ADC analog-to-digital converter comparator DMA 16-bit high-resolution timer 25 MHz 8 KB flash memory 1 KB SRAM TSSOP-38 TSSOP package family surface-mount package industrial control sensor monitoring data acquisition
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情