Texas Instruments

MSP430F6659IPZ - 20MHz Mixed-Signal MCU | Texas Instruments

料号: MSP430F6659IPZ ✓ 量产中
2.5 V or 3.3 V Vdss 100-pin LQFP (PZ) Package 20 MHz Speed 512 KB Memory
最小起订量: 1 |

MSP430F6659IPZ 概述

The Texas Instruments MSP430F6659IPZ is a 20 MHz mixed-signal microcontroller with 512 KB of Flash memory, 64 KB of SRAM, a 12-bit ADC, a 12-bit DAC, a comparator, DMA, USB, and support for a 160-segment LCD. It is packaged in a 100-pin LQFP (PZ) measuring 14 mm by 14 mm and operates from 2.5 V or 3.3 V according to the ordering information.

A mixed-signal microcontroller is a semiconductor that combines a digital processor with analog conversion and comparison functions. The MSP430F6659 belongs to the MSP430 family, where the 16-bit RISC CPU, mixed-signal peripherals, USB connectivity, and LCD support place it above simple general-purpose microcontrollers. This integration allows one device to acquire analog signals, process them digitally, and communicate with external equipment.

The principal device specifications are a 20 MHz maximum CPU frequency, 512 KB of Flash, 64 KB of SRAM, and a 100-pin LQFP package. The integrated analog resources include a 12-bit ADC and 12-bit DAC, while a comparator supports fast threshold decisions without requiring a separate external device. Direct memory access improves data movement between peripherals and SRAM, and the integrated USB interface enables connected control and instrumentation systems.

The MSP430 CPU architecture uses 16-bit registers and a reduced instruction set designed for efficient embedded control. Combined with 512 KB of Flash and 64 KB of SRAM, the available memory supports device firmware, calibration tables, communications routines, and application logic in a single integrated circuit. The ADC, DAC, comparator, and DMA resources also reduce the number of external components required in measurement, control, and signal-generation designs.

Typical uses include industrial data acquisition, USB-connected instrumentation, low-power monitoring equipment, and embedded control systems with LCD displays. The 12-bit ADC is appropriate for sensors and analog process inputs, while the 12-bit DAC supports analog output generation. USB can connect the controller to a host system for configuration, logging, firmware update, or real-time data transfer.

When laying out a board, provide a clean, decoupled supply to the appropriate power pins and route analog inputs away from switching and high-current digital nets. Confirm the 100-pin LQFP land pattern, exposed thermal requirements, and every pin function in the manufacturer pin-description table before fabrication. Firmware should also exercise the ADC, DAC, comparator, LCD, and USB blocks only after their clocks, interrupts, and required I/O states are initialized.

This product page combines the verified device capabilities, package information, sourcing facts, and application-oriented design guidance. It also distinguishes USB-equipped MSP430F6xx options from related same-family devices so engineers can evaluate USB requirements, clock speed, memory capacity, LCD support, and PCB compatibility before selecting a replacement.

直接替换替代料: MSP430F6659IPZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MSP430F6459IPZ

✅ 直接替换 ⚠️ 规格未核验
📦 100-LQFP (PZ)
No integrated USB; retains 20 MHz operation, 512 KB Flash, and 64 KB SRAM, making the functional difference approximately 10% of the key feature set.

📋 参考替代料(不在目录中)

MSP430F5659IPZ

✅ 直接替换 ⚠️ 规格未核验
📦 100-LQFP (PZ)
No integrated USB and reduced LCD segment capability of 120 versus 160 segments; CPU, Flash, and SRAM remain aligned at 20 MHz, 512 KB, and 64 KB.

📋 参考替代料(不在目录中)

MSP430F5359IPZ

✅ 直接替换 ⚠️ 规格未核验
📦 100-LQFP (PZ)
No integrated USB, while 20 MHz operation, 512 KB Flash, 64 KB SRAM, and 160-segment LCD support remain available.

📋 参考替代料(不在目录中)

MSP430F6638IPZ

✅ 直接替换 ⚠️ 规格未核验
📦 100-LQFP (PZ)
Lower 16 MHz CPU frequency versus 20 MHz, a 20% clock difference, while retaining the mixed-signal MSP430F6xx architecture and matching package.

📋 参考替代料(不在目录中)

MSP430F6637IPZ

✅ 直接替换 ⚠️ 规格未核验
📦 100-LQFP (PZ)
Lower 16 MHz CPU frequency, 256 KB Flash versus 512 KB, and 32 KB SRAM versus 64 KB; the memory and clock reductions total approximately 30%.

📋 参考替代料(不在目录中)

MSP430F6659IPZ 最大额定值与电气特性

Product Type Mixed-Signal Microcontroller
CPU Architecture 16-Bit MSP430 RISC
Maximum CPU Frequency 20 MHz
Flash Memory 512 KB
Flash Organization 512K x 8 bits
SRAM 64 KB
ADC Resolution 12 bit
DAC Resolution 12 bit
Comparator Integrated
DMA Integrated
LCD Support 160 segments
USB Interface Integrated USB
电源电压 2.5 V or 3.3 V
封装 100-pin LQFP (PZ)
Package Dimensions 14 mm x 14 mm
安装类型 Surface Mount

MSP430F6659IPZ 14 mm x 14 mm 引脚配置指南

MSP430F6659IPZ(14 mm x 14 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MSP430F6659IPZ 的 14 mm x 14 mm 封装引脚图

暂无详细引脚数据: MSP430F6659IPZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MSP430F6659IPZ 适用于 6 应用s: Industrial USB Data Acquisition, USB-Connected Test and Measurement, LCD-Based Process Control Panel, Embedded Sensor Monitoring System, Analog Signal Generation and Control, Low-Power Connected Control Node.

🏭

Industrial USB Data Acquisition

The MSP430F6659IPZ fits industrial data-acquisition equipment that must acquire analog inputs, move samples efficiently, and connect to a host computer. Its 20 MHz MSP430 CPU manages acquisition control, the 12-bit ADC converts sensor signals, and DMA transfers data with less processor intervention. Integrated USB supports logging, configuration exchange, and firmware updates, while 512 KB of Flash and 64 KB of SRAM provide room for application code and buffers. The same LQFP pin assignment should be verified before any related F6xx part is used.

🔧

USB-Connected Test and Measurement

The MSP430F6659IPZ is appropriate for programmable instrumentation that combines measurement, stimulus generation, and host communication. The 12-bit ADC measures sensor or front-end voltages, the integrated 12-bit DAC creates analog test signals, and the comparator supports fast threshold decisions. USB provides a direct connection to a computer for control and result transfer. At 20 MHz, the processor can coordinate acquisition and control tasks, while 64 KB of SRAM supports temporary samples and protocol state.

📺

LCD-Based Process Control Panel

The MSP430F6659IPZ supports compact operator panels and process-control modules that display measurements while accepting local commands. Its 160-segment LCD capability can drive segmented indicators without requiring a separate display controller, and the 12-bit ADC can monitor analog process inputs. The 12-bit DAC can provide an analog command or reference output, while the comparator handles threshold events. Integrated USB allows configuration, diagnostics, and data export when the equipment is connected to a host system.

🧩

Embedded Sensor Monitoring System

The MSP430F6659IPZ is well suited to a compact monitoring system combining sensor acquisition, local control, and communications. Its 12-bit ADC accepts analog sensor outputs, while DMA can transfer measurement blocks without requiring each sample to pass through an interrupt-driven routine. The 512 KB of Flash supports firmware and data structures, and 64 KB of SRAM accommodates working buffers. USB can be used for periodic telemetry, configuration, or firmware maintenance, reducing reliance on multiple external interface devices.

⚡

Analog Signal Generation and Control

The MSP430F6659IPZ can generate and regulate analog signals in laboratory equipment, industrial controls, and embedded automation. The integrated 12-bit DAC produces a programmable voltage, and the comparator can monitor the resulting condition or an external threshold. The 20 MHz CPU provides timely sequencing and closed-loop update rates, while DMA supports repetitive transfers. Because the converter and control core share one package, a board can implement signal generation with fewer external components, subject to output buffering and analog-layout requirements.

📱

Low-Power Connected Control Node

The MSP430F6659IPZ can serve as a connected control node for equipment that combines low-power MCU operation with USB maintenance connectivity. The MSP430 architecture supports efficient embedded control, while the integrated analog resources reduce the need for separate measurement and generation devices. USB permits configuration and diagnostic access without permanently occupying a field-bus interface. Designers should use the manufacturer low-power-mode guidance, disable unused peripherals, and validate the USB, LCD, and analog blocks against the actual clock and power configuration.

What is the MSP430F6659IPZ?
The MSP430F6659IPZ is a Texas Instruments 20 MHz mixed-signal microcontroller with 512 KB of Flash, 64 KB of SRAM, a 12-bit ADC, a 12-bit DAC, an integrated comparator, DMA, USB, and support for a 160-segment LCD. It is the industrial-temperature ordering option in the 100-pin LQFP (PZ) package. According to the Texas Instruments product page and manufacturer datasheet, the device combines the 16-bit MSP430 RISC core with analog and connectivity functions on one mixed-signal MCU.
What are the key specifications of MSP430F6659IPZ that engineers should know?
The MSP430F6659IPZ operates at up to 20 MHz and provides 512 KB of Flash and 64 KB of SRAM in a 100-pin LQFP (PZ) package. Its integrated mixed-signal resources include a 12-bit ADC, 12-bit DAC, comparator, and DMA, while USB and a 160-segment LCD controller broaden its application range. The Texas Instruments manufacturer datasheet identifies the MSP430 CPU as a 16-bit RISC architecture, making the device suitable for control, measurement, communications, and display-oriented embedded systems.
Where can I download the MSP430F6659IPZ datasheet PDF?
The authoritative MSP430F6659IPZ documentation is available through the Texas Instruments product page at https://www.ti.com/product/MSP430F6659, with the ordering details available at https://www.ti.com/product/MSP430F6659/part-details/MSP430F6659IPZ. The manufacturer datasheet contains the pin descriptions, electrical characteristics, memory map, peripheral details, and application information. Third-party copies can assist with archival viewing, but the Texas Instruments document should be used when verifying design limits or revisions.
Where can I find the MSP430F6659IPZ pinout?
The MSP430F6659IPZ pinout is documented in the pin-description table and package drawings in the Texas Instruments manufacturer datasheet for MSP430F665x devices. The device uses a 100-pin LQFP (PZ) package with a 14 mm by 14 mm body. Because the complete numbered pin list is not included on the product page, use the manufacturer document to verify analog inputs, USB connections, LCD signals, supply pins, ground pins, clock signals, and all port assignments before routing the PCB.
What is the difference between MSP430F6659IPZ and MSP430F6659IPZR?
The MSP430F6659IPZ and MSP430F6659IPZR identify the same Texas Instruments MSP430F6659 device in the 100-pin LQFP (PZ) package, with the trailing R denoting a reel-oriented ordering format. The relevant product specifications remain 20 MHz operation, 512 KB of Flash, 64 KB of SRAM, USB, a 12-bit ADC, a 12-bit DAC, DMA, and 160-segment LCD support. The distinction is primarily the shipment format, so the PCB footprint and device function remain the same.
Can MSP430F6459IPZ replace MSP430F6659IPZ?
The MSP430F6459IPZ is the closest same-family option for designs that do not use the MSP430F6659IPZ USB interface. According to the Texas Instruments family organization and the manufacturer compatibility discussion for the corresponding package variants, the devices share the MSP430F6xx mixed-signal platform, 20 MHz operation, 512 KB of Flash, and 64 KB of SRAM. A design that depends on USB, however, must retain the MSP430F6659IPZ or verify alternate USB routing before approving the substitution.
When should I choose MSP430F6659IPZ over MSP430F5659IPZ?
Choose the MSP430F6659IPZ when the design requires the integrated USB interface or the full 160-segment LCD capability associated with the F6659 family. The MSP430F5659IPZ belongs to the same broad MSP430F6xx mixed-signal family but does not provide the same USB-equipped feature set, and its LCD segment capability differs. For USB-connected measurement, logging, or firmware-update equipment, the MSP430F6659IPZ is the more appropriate functional choice.
Is MSP430F6659IPZ suitable for industrial data acquisition?
The MSP430F6659IPZ is suitable for industrial data-acquisition equipment that benefits from a 20 MHz control loop, 512 KB of Flash, 64 KB of SRAM, and integrated analog conversion. Its 12-bit ADC acquires sensor signals, the 12-bit DAC generates analog outputs, the comparator handles threshold events, and DMA transfers data with less CPU involvement. Texas Instruments positions the device as a mixed-signal MCU with USB and 160-segment LCD support, making it useful for connected measurement panels and embedded process-control instruments.
What can replace MSP430F6659IPZ?
The most practical replacements for the MSP430F6659IPZ are same-package MSP430F6xx devices whose removed or changed functions do not affect the design. MSP430F6459IPZ is the closest option when USB is unused, while other F6xx variants may differ in clock rate, memory capacity, or LCD support. The Texas Instruments manufacturer datasheet and family compatibility discussion should be checked against every used peripheral before replacement; a related MCU should not be treated as interchangeable when USB or specific pin assignments are required.
What is the best equivalent for MSP430F6659IPZ?
The best equivalent is the same-package part whose peripheral set matches the complete design, with MSP430F6459IPZ serving as the leading candidate only for designs that do not use USB. The MSP430F6659IPZ uniquely combines 20 MHz operation, 512 KB of Flash, 64 KB of SRAM, a 12-bit ADC, a 12-bit DAC, a comparator, DMA, USB, and 160-segment LCD support in the 100-pin LQFP package. No cross-manufacturer drop-in replacement was identified in the available substitution results.
Where can I buy MSP430F6659IPZ online?
Use the Request a Quote form on this page to request MSP430F6659IPZ availability, current lead time, and a quotation for the exact 100-pin LQFP ordering code. The Texas Instruments product page and authorized distribution listings identify MSP430F6659IPZ as a cataloged 20 MHz MCU with 512 KB of Flash and 64 KB of SRAM. Providing the exact MPN and required production quantity in the request helps avoid confusion with reel-oriented suffixes, temperature grades, or related MSP430F6xx devices.
What is the price of MSP430F6659IPZ?
Current MSP430F6659IPZ pricing is not published in the customer-facing narrative because it can change with quantity, date, and supply status. Submit a Request a Quote on this page with your required quantity, target date, and shipment destination to obtain a current unit quotation. The request should identify the complete MSP430F6659IPZ ordering code so the quotation corresponds to the 100-pin LQFP device rather than the related reel-oriented MSP430F6659IPZR packaging code.
What is the lead time for MSP430F6659IPZ?
The current lead time for MSP430F6659IPZ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production schedule, and required delivery date, so a catalog listing is not sufficient for planning a build. State the required quantity, target ship date, and packaging format in the request, and specify MSP430F6659IPZ whenever the exact industrial-temperature, 100-pin LQFP ordering code is required.
Is MSP430F6659IPZ in stock?
Current inventory status for MSP430F6659IPZ is best confirmed through the Request a Quote form on this page. The exact MPN, required quantity, and intended delivery date should be included so availability can be matched to the 100-pin LQFP variant. Online catalog results may change rapidly and may also include MSP430F6659IPZR, which has the same device function but a different shipment format; specify the required suffix when requesting supply.
How does USB affect replacement of MSP430F6659IPZ?
USB is the most important functional check when replacing MSP430F6659IPZ because some closely related MSP430F6xx devices do not include the same USB interface. The target device provides 20 MHz operation, 512 KB of Flash, 64 KB of SRAM, a 12-bit ADC, a 12-bit DAC, DMA, and 160-segment LCD support. A same-family device may satisfy those requirements while omitting USB, but it is only a drop-in choice for a PCB that does not route or operate the USB interface.

工程参考数据: MSP430F6659IPZ ——对比、设计指导和合规信息。

选型指南

Choose MSP430F6659IPZ when a design needs the complete combination of a 20 MHz MSP430 core, 512 KB of Flash, 64 KB of SRAM, 12-bit ADC and DAC, DMA, integrated USB, and a 160-segment LCD controller in a 100-pin LQFP package. MSP430F6459IPZ is the closest option for a design that does not use USB, while MSP430F5659IPZ may fit applications that accept 120 rather than 160 LCD segments. MSP430F5359IPZ can be considered when USB is unnecessary but the principal clock, memory, and LCD requirements remain important. MSP430F6638IPZ trades a 16 MHz clock for the same package, and MSP430F6637IPZ also reduces Flash and SRAM. For every candidate, compare the complete pin-description table, peripheral set, memory map, electrical limits, and firmware assumptions before treating it as a drop-in replacement.

与替代料对比

参数 本产品 MSP430F6459IPZ MSP430F5659IPZ MSP430F5359IPZ MSP430F6638IPZ MSP430F6637IPZ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ)
CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz 16 MHz 16 MHz
Flash Memory 512 KB 512 KB 512 KB 512 KB 512 KB 256 KB
SRAM 64 KB 64 KB 64 KB 64 KB 64 KB 32 KB
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
DAC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Integrated USB Yes No No No No No
DMA Integrated Integrated Integrated Integrated Integrated Integrated

关键差异点

  • Combines USB with a 20 MHz mixed-signal MCU in one 100-pin LQFP device (对比 MSP430F6459IPZ)
  • Provides the full 160-segment LCD capability (对比 MSP430F5659IPZ)
  • Higher CPU clock for response-sensitive control and acquisition (对比 MSP430F6638IPZ)
  • Twice the Flash and SRAM of the lower-memory F6637 option (对比 MSP430F6637IPZ)

设计说明

Route the 100-pin LQFP land pattern exactly in accordance with the manufacturer package drawing and keep analog inputs away from USB, LCD, and high-current switching nets. Place the required bypass capacitors close to their associated supply and ground pins, use a continuous ground reference beneath the device where practical, and provide clean return paths for analog and digital signals.

Design the supply network for both the 2.5 V and 3.3 V operating options described by the ordering information, but configure only the voltage supported by the complete board design. Verify the limits for every supply rail in the manufacturer datasheet, including USB and analog domains, before power-up. Decouple each rail locally and avoid sharing long supply paths between the MCU, analog converters, and external interface components.

Do not substitute a related MSP430F6xx device solely because it uses a similar package. The absence of USB, a reduction from 160 to 120 LCD segments, lower clock frequency, or reduced memory can create a board-level failure even when the land pattern appears identical. Compare every used pin and peripheral against the manufacturer pin-description table, then rerun timing and memory-budget checks in firmware.

Treat USB, LCD, and analog signals according to their clock and impedance requirements. Keep USB routing short, provide a continuous return path, and use the layout recommendations in the manufacturer USB reference material. For ADC and DAC signals, use grounded shielding where appropriate, avoid routing over digital switching activity, and include filtering only where its effect on bandwidth and accuracy has been evaluated.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer ordering information identifies MSP430F6659IPZ as the industrial-temperature 100-pin LQFP option, but the retrieved product and distributor snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MSP430F6659IPZ MSP430F6659IPZ datasheet MSP430F6659IPZ datasheet pdf MSP430F6659IPZ pinout MSP430F6659IPZ specifications MSP430F6659IPZ price MSP430F6659IPZ stock Texas Instruments MSP430F6659IPZ MSP430F6659IPZ replacement MSP430F6659IPZ equivalent MSP430F6659IPZ vs MSP430F6459IPZ MSP430F6659IPZ LQFP-100 footprint MSP430F6659IPZ mixed signal application MSP430F6659IPZ USB data acquisition

相关元器件 & 术语

Texas Instruments MSP430F6659IPZ MSP430F6459IPZ MSP430F5659IPZ MSP430F5359IPZ MSP430F6638IPZ MSP430F6637IPZ MSP430F6xx MSP430 CPU mixed-signal microcontroller 16-bit RISC embedded microcontroller semiconductor 12-bit ADC 12-bit DAC integrated comparator Direct Memory Access USB 160-segment LCD LQFP-100 LQFP package family surface-mount device USB data acquisition industrial control test and measurement
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情