Texas Instruments

MSP430F6731IPN - 25MHz Mixed-Signal MCU | Texas Instruments

料号: MSP430F6731IPN ✓ 量产中
3 V Vdss 80-pin LQFP (PN) Package 25 MHz Speed 32 KB (32K x 8) Memory
最小起订量: 1 |

MSP430F6731IPN 概述

The Texas Instruments MSP430F6731IPN is a 16-bit mixed-signal microcontroller and single-phase metering system-on-chip with a 25 MHz MSP430 CPU, three Sigma-Delta ADCs, LCD support, and a real-time clock. It provides 32 KB of Flash memory, 2 KB of RAM, and operates from a 3 V supply in an 80-pin LQFP package measuring 12 x 12 mm. The device combines a metering-focused analog front end with an embedded MCU architecture for energy-measurement and control products.

A mixed-signal MCU is a microcontroller that integrates analog measurement circuitry with a digital processor and memory. In the broader semiconductor hierarchy, the MSP430F6731IPN belongs to the 16-bit RISC MCU family, while its Sigma-Delta converters, LCD interface, and real-time clock extend it into metering SoC applications. This integration allows a meter design to acquire analog signals, process them digitally, maintain time information, and drive a display while retaining the low-power characteristics associated with the MSP430 platform.

Three Sigma-Delta ADCs provide the core analog measurement resources, while the 25 MHz CPU supplies the processing bandwidth for measurement calculation, calibration, communication, and user-interface functions. The 32 KB Flash memory supports firmware storage, and 2 KB of RAM provides working space for buffers, variables, and control logic. An integrated LCD capability reduces the need for a separate display controller in cost-sensitive metering equipment, and the real-time clock supports time-stamped load records and time-of-use information.

The MSP430 CPU uses a 16-bit RISC architecture with 16-bit registers and constant generators, supporting efficient embedded control while operating at up to 25 MHz. This processing capability is appropriate for meters that must combine sampled sensor data with tariff logic, event logging, display updates, and communications. Because the metering analog functions and control processor share one device, designers can reduce the number of discrete components while retaining dedicated measurement and display functions.

Typical uses include single-phase electricity meters, utility data concentrators, energy-monitoring appliances, industrial load-management terminals, and compact LCD-driven measurement instruments. The device is also suitable for prototypes and production designs requiring a mixed-signal MCU with integrated Sigma-Delta conversion, a real-time clock, and LCD control. Its 80-pin LQFP package provides the mixed-signal and display resources needed by these applications while remaining compatible with conventional leaded PCB assembly.

The primary design consideration is allocating pins and board area carefully around the analog measurement section, LCD signals, supply rails, and exposed device functions. Decoupling should follow the recommended power-network arrangement in the manufacturer datasheet, and analog input routing should be kept away from high-current switching paths. Before firmware deployment, verify memory usage, timing, calibration, display timing, and meter-specific regulatory requirements.

This page combines the manufacturer product information with a parameter comparison, application guidance, practical layout considerations, and a qualified drop-in-alternative review. It is designed to help engineers identify whether the MSP430F6731IPN fits a metering design before moving to schematic capture, firmware development, and PCB layout.

直接替换替代料: MSP430F6731IPN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MSP430F6736IPNR

✅ 直接替换
📦 LQFP-80 (PN)
Same 80-pin LQFP family and 16-bit MSP430 architecture, but Flash and RAM are larger than 32 KB and 2 KB, respectively.

📋 参考替代料(不在目录中)

MSP430F6733IPN

✅ 直接替换 ⚠️ 规格未核验
📦 LQFP-80 (PN)
Same MSP430F67xx metering family and 80-pin LQFP package, with device-specific ADC, memory, and peripheral differences from the 32 KB Flash F6731 configuration.

📋 参考替代料(不在目录中)

MSP430F6721IPNR

✅ 直接替换
📦 LQFP-80 (PN)
Same 80-pin metering-MCU footprint and 16-bit MSP430 platform, but ADC, display, memory, and peripheral configurations differ from the three-ADC F6731.

📋 参考替代料(不在目录中)

MSP430F6729IPN

✅ 直接替换 ⚠️ 规格未核验
📦 LQFP-80 (PN)
Same MSP430F67xx family and 80-pin LQFP package, with fewer or differently assigned metering peripherals than the three-Sigma-Delta-ADC F6731.

📋 参考替代料(不在目录中)

MSP430F6737IPN

✅ 直接替换 ⚠️ 规格未核验
📦 LQFP-80 (PN)
Same 80-pin mixed-signal metering platform, but memory and peripheral resources differ from the MSP430F6731IPN.

📋 参考替代料(不在目录中)

MSP430F6731IPN 最大额定值与电气特性

Product Type Single-phase metering SoC
CPU Architecture 16-bit MSP430 RISC
最大时钟频率 25 MHz
Flash Memory 32 KB (32K x 8)
RAM Memory 2 KB
Sigma-Delta ADC Count 3
LCD Support Yes
Real-Time Clock Yes
Nominal Supply Voltage 3 V
封装 80-pin LQFP (PN)
Package Dimensions 12 x 12 mm
Package Type LQFP
引脚数量 80 pins
安装类型 Surface Mount

MSP430F6731IPN lqfp 引脚配置指南

MSP430F6731IPN(lqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

MSP430F6731IPN 的 lqfp 封装引脚图

暂无详细引脚数据: MSP430F6731IPN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MSP430F6731IPN 适用于 6 应用s: Single-Phase Smart Electricity Meter, LCD Energy-Monitoring Terminal, Industrial Load-Management Controller, Utility Data Concentrator, Time-of-Use Appliance Controller, Compact Energy-Measurement Instrument.

⚡

Single-Phase Smart Electricity Meter

The MSP430F6731IPN fits a single-phase smart meter because it combines three Sigma-Delta ADCs with a 25 MHz 16-bit MSP430 processor in one 80-pin LQFP device. The ADCs can acquire voltage- and current-sensor signals, while the processor performs scaling, accumulation, calibration, tariff processing, and event handling. Its 32 KB of Flash stores application firmware and its 2 KB of RAM supports working buffers, counters, and display state. The integrated LCD capability reduces the need for a separate display controller, while the real-time clock supports time-of-use schedules and timestamped records. The main design trade-off is the relatively modest memory footprint, which must be considered when adding communications, complex cryptography, or extensive diagnostic features.

📺

LCD Energy-Monitoring Terminal

The MSP430F6731IPN is suitable for a compact LCD energy-monitoring terminal because it combines LCD support, a real-time clock, and three Sigma-Delta ADCs with a 25 MHz MSP430 CPU. The system can measure one or more energy-related analog inputs, calculate demand or consumption, display status locally, and retain operating periods in the real-time clock. Its 32 KB Flash and 2 KB of RAM allow metering, display, and basic control firmware to share one device. Compared with a processor paired with a separate ADC and display controller, the integrated approach reduces board complexity. Designers should verify LCD segment count, timing requirements, ADC channel assignments, and display update latency against the datasheet before layout release.

🏭

Industrial Load-Management Controller

The MSP430F6731IPN can serve as the measurement and control core of an industrial load-management terminal. Three Sigma-Delta ADCs allow current or power signals to be digitized, while the 25 MHz MSP430 CPU evaluates thresholds, updates operating state, and controls an LCD display. The integrated real-time clock can timestamp operating intervals and scheduled events, which is useful for energy accountability and demand monitoring. Its 32 KB of Flash accommodates embedded control code, and the 2 KB RAM can hold acquisition buffers and state variables. For a production design, the important trade-off is ensuring that calibration tables, communications buffers, diagnostics, and display data fit within the available memory while preserving deterministic acquisition timing.

🌐

Utility Data Concentrator

The MSP430F6731IPN can support a utility data-concentrator front end that gathers analog measurements and coordinates local meter functions. Its three Sigma-Delta ADCs provide dedicated measurement channels, the 25 MHz 16-bit processor can prepare data for a communications interface, and the real-time clock supports synchronized event recording. LCD support is useful during installation, commissioning, and local troubleshooting without requiring a separate display controller. The 32 KB Flash and 2 KB RAM make the device appropriate for compact single-phase equipment, although protocol-heavy concentrators may favor the larger-memory MSP430F6736IPNR. A practical design should reserve memory for protocol stacks, security features, diagnostics, and future field upgrades rather than sizing firmware only for the current meter function.

🧩

Time-of-Use Appliance Controller

The MSP430F6731IPN fits a time-of-use appliance controller that measures consumption, applies tariff schedules, and presents operating information on an LCD. The real-time clock provides the time reference needed for daily or periodic pricing logic, while the three Sigma-Delta ADCs acquire the required analog measurements. The 25 MHz MSP430 CPU can calculate accumulated energy and coordinate control outputs, and its 2 KB of RAM is sufficient for compact counters and schedule data. Integration reduces the component count compared with separate metering, clock, and display hardware. The key constraint is firmware planning: application code, calibration coefficients, schedules, and any communications should be evaluated against 32 KB of Flash before committing to this device for a feature-rich appliance.

🔧

Compact Energy-Measurement Instrument

The MSP430F6731IPN is well suited to a compact bench or field energy-measurement instrument because it combines measurement conversion, processing, timing, and display support in one 80-pin LQFP package. The three Sigma-Delta ADCs can digitize sensor outputs, the 25 MHz processor can calculate measurement results, and the LCD interface can present live readings and configuration status. The real-time clock adds logging and scheduled-test capability without another timing component. With 32 KB of Flash and 2 KB of RAM, the device targets focused instruments rather than laboratory platforms with extensive data storage. Consider the larger-memory MSP430F6736IPNR when the design needs substantial calibration data, communication buffering, or downloadable test sequences.

推荐产品汇总

MSP430F6736IPNR Same-family metering option with larger memory resources 用于: Single-Phase Smart Electricity Meter, LCD Energy-Monitoring Terminal, Utility Data Concentrator, Compact Energy-Measurement Instrument MSP430F6733IPN Same-package MSP430F67xx metering MCU 用于: Single-Phase Smart Electricity Meter, Time-of-Use Appliance Controller MSP430F6737IPN Same-package mixed-signal MCU for expanded meter functions 用于: LCD Energy-Monitoring Terminal, Utility Data Concentrator MSP430F6729IPN Same-package metering-oriented MCU alternative 用于: Industrial Load-Management Controller, Compact Energy-Measurement Instrument MSP430F6721IPNR Same-family low-power metering controller 用于: Industrial Load-Management Controller, Time-of-Use Appliance Controller
What is the MSP430F6731IPN?
The MSP430F6731IPN is a 16-bit mixed-signal metering microcontroller from Texas Instruments with a 25 MHz MSP430 CPU, three Sigma-Delta ADCs, LCD support, a real-time clock, 32 KB of Flash memory, and 2 KB of RAM. It is packaged in an 80-pin LQFP package measuring 12 x 12 mm. According to the Texas Instruments product page, the device is designed specifically for single-phase metering applications.
What are the key specifications of MSP430F6731IPN that engineers should know?
The MSP430F6731IPN combines a 25 MHz 16-bit MSP430 RISC core with three Sigma-Delta ADCs, LCD capability, a real-time clock, 32 KB of Flash, and 2 KB of RAM in an 80-pin LQFP package. According to the Texas Instruments product page, the 3 V device integrates the measurement, processing, display, and timekeeping resources required by a single-phase metering product. These specifications make it more specialized than a general-purpose 16-bit MCU.
What is the operating voltage of MSP430F6731IPN?
The MSP430F6731IPN is identified as a 3 V device in the product listing. The exact minimum and maximum supply limits are not stated on the product page excerpt and must be confirmed in the Texas Instruments MSP430F6731 datasheet before the device is used in a new design. Confirming the full voltage range, current limits, and power-supply tolerances is especially important when the meter also operates from a mains-derived auxiliary supply.
Where can I download the MSP430F6731IPN datasheet PDF?
The official MSP430F6731 datasheet can be obtained through the Texas Instruments product page at https://www.ti.com/product/MSP430F6731. The page links the device data sheet, ordering information, quality information, and related technical documents. For a new design, use the manufacturer copy as the authoritative source for pin assignments, electrical limits, ADC characteristics, clock setup, LCD interfaces, and recommended application circuits.
Where can I find the MSP430F6731IPN pinout?
The MSP430F6731IPN pinout is published in the pin-description table and package drawings in the Texas Instruments MSP430F6731 datasheet. The exact 80-pin signal list is not reproduced on the product page, so use the manufacturer document when assigning PCB nets, especially for analog inputs, LCD signals, supply pins, ground connections, and programming interfaces. The device is shipped in the 80-pin LQFP (PN) package.
Is MSP430F6731IPN suitable for a single-phase electricity meter?
The MSP430F6731IPN is specifically suited to single-phase metering because it integrates three Sigma-Delta ADCs with a 25 MHz MSP430 processor, LCD support, a real-time clock, 32 KB of Flash, and 2 KB of RAM. According to the Texas Instruments product page, these resources support compact metering designs. Final suitability still depends on channel count, current-sensor output range, calibration method, communications requirements, and applicable metering regulations.
Where can I buy MSP430F6731IPN online?
Use the Request a Quote form on this page to request MSP430F6731IPN pricing, stock confirmation, lead time, and order quantities. The form lets you specify the required package and quantity without relying on a static price table. For a production release, confirm authorized-channel availability, date codes, and lifecycle status during the quotation process before reserving components for the build.
What is the price of MSP430F6731IPN?
Current MSP430F6731IPN pricing is obtained through the Request a Quote form on this page. The form allows procurement teams to request the relevant quantity break, currency, stock position, and expected delivery terms. Because component pricing and availability can change with quantity and market conditions, use the quoted figure for planning rather than a historical or starting-price reference.
What is the lead time for MSP430F6731IPN?
Request the current MSP430F6731IPN lead time through the Request a Quote form on this page. Include your required quantity, shipment destination, production schedule, and whether reel or tray packaging is needed. The confirmed lead time should also reflect factory inventory, authorized-channel stock, and any allocation affecting scheduled meter production.
Is MSP430F6731IPN in stock?
Current MSP430F6731IPN stock status should be confirmed through the Request a Quote form on this page. Submit the required quantity and packaging preference so procurement can check live inventory and delivery availability. For safety-critical production schedules, request lot traceability and date-code information as part of the supply confirmation.
What is the best drop-in replacement for MSP430F6731IPN?
The MSP430F6736IPNR is the closest identified same-family option in the 80-pin LQFP line because it retains the MSP430 architecture while adding memory, but it is not an unconditional functional replacement. According to the manufacturer’s family information, MSP430F6731IPN has 32 KB of Flash and three Sigma-Delta ADCs, whereas the F6736 provides a larger memory configuration. Firmware, pin-function, ADC, and display changes must be verified before substitution.
Can MSP430F6736IPNR replace MSP430F6731IPN?
MSP430F6736IPNR may serve as a board-compatible migration candidate in the same 80-pin LQFP family, but it should not be treated as automatically interchangeable. The MSP430F6736IPN is identified as a 16-bit mixed-signal MCU, while MSP430F6731IPN has 32 KB of Flash, 2 KB of RAM, three Sigma-Delta ADCs, LCD support, and a real-time clock. Review the manufacturer comparison tables for pin changes, memory, ADC behavior, and firmware implications.
When should I choose MSP430F6731IPN over MSP430F6736IPNR?
Choose MSP430F6731IPN when a design specifically requires its 32 KB Flash, 2 KB RAM, three Sigma-Delta ADCs, LCD support, and real-time clock within an 80-pin LQFP footprint. MSP430F6736IPNR is more attractive when its larger memory configuration matches the firmware workload or metering feature set. Select the device whose ADC, display, memory, and pin requirements match without unnecessary board or firmware changes.
Is MSP430F6731IPN the same as MSP430F6733IPN?
The MSP430F6731IPN and MSP430F6733IPN belong to the same MSP430F67xx mixed-signal family and appear in the same 80-pin LQFP configuration, but they should not be assumed to be identical. The exact flash, RAM, ADC, timer, display, and pin assignments must be compared using the Texas Instruments datasheets. A drop-in designation is appropriate only after those device-specific differences have been checked.
What is the best alternative to MSP430F6731IPN for metering?
The closest identified Texas Instruments alternatives are MSP430F6736IPNR, MSP430F6733IPN, MSP430F6721IPNR, MSP430F6729IPN, and MSP430F6737IPN, all from the MSP430F67xx metering-MCU family. No cross-brand drop-in replacement is established in the available cross-reference results. Because memory, ADC channels, LCD functions, and peripheral assignments can differ within the family, validate the exact device against the schematic and firmware requirements.

工程参考数据: MSP430F6731IPN ——对比、设计指导和合规信息。

选型指南

Choose the MSP430F6731IPN when a single-phase metering design needs three Sigma-Delta ADCs, LCD support, a real-time clock, a 25 MHz 16-bit MSP430 processor, 32 KB of Flash, and 2 KB of RAM in an 80-pin LQFP package. It is particularly suitable when the meter needs local display and timekeeping without separate controller devices. Select the MSP430F6736IPNR when substantially more Flash and RAM are required for communications, security, diagnostics, or elaborate logging. Consider the MSP430F6733IPN, MSP430F6721IPNR, MSP430F6729IPN, or MSP430F6737IPN only after comparing the exact ADC count, memory map, display capability, pin multiplexing, and timing requirements. No cross-brand drop-in replacement is established, so firmware and hardware validation remain essential for any family substitution.

与替代料对比

参数 本产品 MSP430F6736IPNR MSP430F6733IPN MSP430F6721IPNR MSP430F6729IPN MSP430F6737IPN
Package 80-pin LQFP (PN), 12 x 12 mm 80-pin LQFP (PN) 80-pin LQFP (PN) 80-pin LQFP (PN) 80-pin LQFP (PN) 80-pin LQFP (PN)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

关键差异点

  • Metering-specific analog integration (对比 MSP430F6721IPNR)
  • Dedicated display and timekeeping integration (对比 MSP430F6736IPNR)
  • Compact 12 x 12 mm footprint with 80-pin access (对比 MSP430F6737IPN)

设计说明

Place the input and output decoupling capacitors adjacent to their corresponding power pins, and follow the exact capacitor values and return paths specified in the Texas Instruments MSP430F6731 datasheet. Because this device combines precision analog measurement with an LCD-capable digital core, keep high-current supply paths and display return currents away from the Sigma-Delta input region. A continuous ground plane under the device is preferred, with analog and digital return currents kept as localized as the pin assignment permits.

Treat the three Sigma-Delta ADC inputs as sensitive analog nodes. Route them away from switching-regulator inductors, relay contacts, crystal-clock circuitry, and display connector transitions. Use short traces, minimize loop area, and place any required input filtering close to the device. Verify the ADC source impedance and acquisition timing against the manufacturer specifications because excessively high source impedance can degrade conversion accuracy.

Do not treat family similarity as proof that every MSP430F67xx device is interchangeable. Confirm the selected alternate part for ADC count, memory capacity, LCD resources, real-time-clock behavior, pin multiplexing, and package drawing. After changing the MPN, regenerate the firmware configuration, check all peripheral assignments, and perform boundary testing on ADC accuracy, LCD timing, clock startup, and low-power transitions.

Estimate power dissipation from the actual 3 V rail and measured operating current rather than using the maximum CPU frequency as a power proxy. The LQFP package must be evaluated against the board’s copper area and the highest expected ambient temperature. Metering products can operate continuously near power supplies or display drivers, so calculate junction temperature with the manufacturer’s thermal model and avoid placing the MCU next to heat-generating components without adequate copper.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status is not stated on the manufacturer product-page listing. Verify RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation during part qualification.

相关搜索

MSP430F6731IPN datasheet MSP430F6731IPN pinout MSP430F6731IPN datasheet pdf MSP430F6731IPN specifications MSP430F6731IPN equivalent MSP430F6731IPN replacement MSP430F6731IPN cross reference MSP430F6731IPN footprint MSP430F6731IPN price MSP430F6731IPN stock Texas Instruments MSP430F6731IPN MSP430F6731IPN single phase metering MSP430F6731IPN vs MSP430F6736IPNR MSP430F6731IPN LQFP-80 pinout MSP430F6731IPN application circuit

相关元器件 & 术语

Texas Instruments MSP430F6731IPN MSP430F6736IPNR MSP430F6733IPN MSP430F6721IPNR MSP430F6729IPN MSP430F6737IPN MSP430 CPU 16-bit RISC microcontroller mixed-signal MCU single-phase metering SoC Sigma-Delta ADC Flash memory RAM real-time clock LCD controller LQFP-80 12 x 12 mm package surface-mount package 25 MHz energy metering IoT industrial energy monitoring semiconductor
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情