MSP430P315SIDL - 16-Bit 8MHz LCD MCU | Texas Instruments
料号: MSP430P315SIDL ✓ 量产中MSP430P315SIDL 概述
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into a single device. In the product hierarchy, the MSP430P315SIDL is a 16-bit RISC microcontroller, part of the MSP430 mixed-signal family and the broader embedded-processing and semiconductor category. Its mixed-signal resources allow a design to manage digital control functions and analog or display-related inputs while reducing the number of external components.
The principal features include a maximum 8 MHz CPU clock, 16 KB of OTP program memory, 512 bytes of RAM, and an integrated 92-segment LCD driver. Low-power operation is supported by five power-saving modes, including standby at 1.3 µA and RAM-retention/off operation at 0.1 µA. Wake-up from standby can occur in 6 µs, making the device suitable for systems that spend substantial time idle but must respond quickly to user input or sensor events.
The MSP430 architecture uses a 16-bit RISC core and an ultralow-power design intended to balance processing capability with standby consumption. Program storage in OTP supports a fixed, one-time programming model rather than repeated in-system rewrites. The integrated LCD driver is particularly valuable for compact displays because it reduces parallel-display component count and frees external I/O for measurement, communication, or control functions.
Typical uses include utility meters, portable measurement instruments, industrial sensor nodes, keypad displays, medical monitoring equipment, and compact consumer controls. For battery-powered products, the standby and RAM-retention currents are important because they determine how much energy the product consumes between user interactions or measurement events. The 5.5 V maximum supply also supports designs operating from regulated low-voltage rails.
PCB implementation requires a 48-SSOP footprint and attention to the manufacturer’s pin and layout guidance. Decoupling should follow the datasheet recommendations, and firmware should account for wake-up latency, LCD bias requirements, and the one-time-programming limitation. Confirm the exact pin functions before assigning external circuitry because an LCD segment, analog input, and digital I/O may share multiplexing options.
This page combines the manufacturer-device description, distributor specifications, package information, pricing status, drop-in-replacement assessment, and practical design considerations into an engineering-focused selection guide for the MSP430P315SIDL.
直接替换替代料: MSP430P315SIDL ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MSP430P315SIDL (相同外形与封装尺寸) ——差异在于 Package, RAM, Wake-Up Time from Standby.
MSP430P315SIDLR
✅ 直接替换📋 参考替代料(不在目录中)
MSP430P315SIDL 最大额定值与电气特性
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | 16-bit RISC |
| 最大时钟频率 | 8 MHz |
| Program Memory | 16 KB OTP (16K x 8) |
| RAM | 512 bytes |
| LCD Segments | 92 segments |
| Maximum Supply Voltage | 5.5 V |
| Low Operation Current | 3 V at 1 MHz |
| Power-Saving Modes | 5 modes |
| Standby Current | 1.3 µA |
| RAM Retention/Off Current | 0.1 µA |
| Wake-Up Time from Standby | 6 µs |
| 封装 | 48-SSOP |
| 安装类型 | Surface mount |
MSP430P315SIDL 48-ssop 引脚配置指南
MSP430P315SIDL(48-ssop 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: MSP430P315SIDL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MSP430P315SIDL 适用于 6 应用s: Utility Metering Displays, Portable Measurement Instruments, Industrial Sensor Nodes, Battery-Powered Environmental Monitors, Medical Monitoring Equipment, Keypad-Based Appliance Controls.
Utility Metering Displays
The MSP430P315SIDL fits utility meters because its integrated 92-segment LCD driver can operate a compatible segment display while the 16-bit CPU handles measurement, accumulation, and user-interface logic. At up to 8 MHz, the processor supports responsive keypad or button handling without requiring a high-power application processor. The 512-byte RAM is modest, so the firmware should avoid buffering large historical datasets. Standby current of 1.3 µA and 6 µs wake-up time help devices that remain idle between display updates or meter interactions.
Portable Measurement Instruments
The MSP430P315SIDL is suitable for handheld or portable measurement instruments that combine a numeric LCD with sensors, switches, and a modest amount of local processing. Its 16 KB OTP program area can hold a focused measurement application, while the 512-byte RAM supports short acquisition and processing windows. The 5.5 V maximum supply simplifies integration with regulated rails, and the 3 V operating condition shown for the 1 MHz current specification supports efficient low-voltage operation. Final input-range and accuracy validation remains application specific.
Industrial Sensor Nodes
The MSP430P315SIDL can serve as the local controller in an industrial sensor node when the node includes a segment display or requires a compact mixed-signal control platform. Its MSP430 CPU16 architecture, 8 MHz maximum clock, and OTP memory provide deterministic control for sensor acquisition, threshold checking, and actuator signaling. Low-power modes are particularly valuable in installations that sample intermittently rather than run continuously. Designers should account for transient protection, sensor conditioning, calibration storage, and communication duties that exceed the device’s 512-byte RAM.
Battery-Powered Environmental Monitors
For battery-powered environmental monitoring, the MSP430P315SIDL offers a useful combination of an 8 MHz 16-bit control core, low standby consumption, and rapid wake-up. A sensor can be sampled after wake-up, processed locally, displayed on an optional segment LCD, and then returned to a low-power state. The 0.1 µA RAM-retention/off current can reduce energy use when state must remain in RAM. Because the program memory is OTP, field firmware updates require a different deployment strategy than flash-based microcontrollers.
Medical Monitoring Equipment
The MSP430P315SIDL can support compact medical monitoring equipment where a readable LCD, local sensing, and low standby activity are more important than large onboard storage. Its 92-segment LCD driver simplifies display integration, while the 16-bit RISC CPU performs fixed-point signal conditioning and alarm logic. The limited 512-byte RAM requires compact buffers, and medical applications must add the required safety, isolation, accuracy, and validation controls beyond the microcontroller itself. Use the manufacturer datasheet to confirm supply limits and operating temperature.
Keypad-Based Appliance Controls
The MSP430P315SIDL is appropriate for appliance controls that need a segment LCD, front-panel keys, and low standby consumption. The LCD driver can reduce display-interface overhead, while the 16 KB OTP program memory supports a dedicated control task and the 512-byte RAM can retain interface state during idle periods. A 6 µs wake-up from standby helps the control respond to user input. The design should still verify LCD multiplex timing, debounce strategy, output-driver topology, and brownout behavior for the selected power source.
工程参考数据: MSP430P315SIDL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 48-SSOP |
| Brand | Texas Instruments |
| CPU Architecture | 16-bit RISC |
| Maximum Clock Frequency | 8 MHz |
| Program Memory | 16 KB OTP (16K x 8) |
| RAM | 512 bytes |
| LCD Driver | 92 segments |
| Maximum Supply Voltage | 5.5 V |
| Standby Current | 1.3 µA |
| Wake-Up Time from Standby | 6 µs |
关键差异点
- Integrated display capability reduces display-driver overhead (对比 Generic 16-bit microcontroller without a 92-segment LCD driver)
- Low-power operation supports intermittently used products (对比 A continuously powered general-purpose MCU)
- Deterministic mixed-signal control platform (对比 A higher-performance application processor)
设计说明
Budget the standby and wake-up behavior around the product’s actual duty cycle. The listed standby current is 1.3 µA, RAM-retention/off current is 0.1 µA, and wake-up from standby takes 6 µs. Include sensor-settling time, LCD updates, and peripheral start-up delays in the energy budget; the MCU wake time alone does not represent the time required to obtain a valid measurement.
Create the 48-SSOP footprint from the manufacturer’s recommended land pattern and verify it against the assigned PCB library. Keep the LCD-related routes away from high-current switching nodes and noisy analog inputs where practical. Follow the datasheet guidance for decoupling and exposed supply connections, and review all 48 positions because LCD multiplexing can constrain which physical pins are available for external functions.
Do not treat the MSP430P315 family name as a drop-in designation for every MSP430P315 ordering suffix. The SIDL suffix identifies the 48-SSOP configuration, and replacement requires matching pin functions, LCD resources, OTP size, RAM, voltage, and peripheral assignments. Also avoid designing repeated field updates into OTP-based firmware; use a boot-update strategy if product requirements include post-deployment code changes.
Plan the LCD and analog measurement sections before final routing because both can influence pin multiplexing. Keep the MCU supply bypass capacitor close to its supply pins and provide a quiet return path for sensitive measurements. Separate LCD drive traces from high-energy switching paths where the board area allows, and test the assembled design for display artifacts, wake timing, and brownout recovery across the intended input range.
合规信息
The device technical summary does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These properties require confirmation from the manufacturer product documentation.