P1010NXE5KHB - QorIQ P1010 1GHz Power Arch SoC | NXP
料号： P1010NXE5KHB ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $51.71 | $51.71 |
| 10 | $48.95 | $489.50 |
| 100 | $45.2 | $4,520.00 |
| 500 | $41.85 | $20,925.00 |
| 1,000 | $38.4 | $38,400.00 |
P1010NXE5KHB 概述
The P1010 belongs to the QorIQ P1 family of communications processors, which occupies the value-performance tier of NXP's embedded networking SoC portfolio. Within the broader taxonomy it sits below the P2/P4 multi-core layers and above the PowerQUICC predecessors, combining application processing, packet processing and crypto acceleration for cost-sensitive networking endpoints. The e500v2 core delivers Power Architecture book-E compatibility, vector/SPE units, and double-precision FPU in hardware, enabling both control-plane and signal-processing workloads.
Key features include hardware-accelerated SEC 4.x for IPsec, SSL/TLS and bulk data encryption, integrated 64-bit DDR3L controller with ECC support, two 10/100/1000 RGMII Gigabit Ethernet MACs with jumbo frame and 1588 timestamping, three PCI Express Gen 2.0 controllers (x1/x2/x4), two SATA 2.0 (3 Gbps) ports, USB 2.0 host + PHY, SD/MMC 3.0, four I2C, two SPI, two UART and 32 GPIO. The integrated SEC engine supports DES, 3DES, AES, ARC4, SHA-1/2, MD-5, RSA, ECC and Kasumi, offloading crypto from the CPU.
Typical applications include industrial routers and gateways, IP cameras, network attached storage (NAS), industrial robotics, factory automation controllers, point-of-sale terminals and digital signage. The wide peripheral mix and integrated SEC make it especially attractive for secure networked endpoints where a host CPU plus external crypto is undesirable. Industrial temperature grade -40C to +105C supports deployment in outdoor enclosures and harsh industrial environments.
When designing with this device, allocate at least four PCB layers for the 19x19 mm BGA fan-out and follow NXP's AN4130 layout guidelines for DDR3L trace matching and SerDes reference clock routing. Boot configuration strapping is read from reset and serial flash, so choose between SPI NOR, I2C EEPROM and SD/MMC boot sources early in the schematic phase.
This page synthesizes NXP official datasheet values, current distributor stock and pricing as of 2026-10-17, and a curated set of drop-in package alternatives not consolidated on a single distributor page, providing practical engineering context the datasheet alone does not.
直接替换替代料： P1010NXE5KHB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P1010NXE5KHB （相同外形与封装尺寸） ——差异在于 Core Architecture, Operating Temperature, Package, Process Technology, SATA.
快速对比工具——选择替代料号进行并排对比：
P1010NSE5KHB
✅ 直接替换📋 参考替代料（不在目录中）
P1010NXN5KHB
✅ 直接替换📋 参考替代料（不在目录中）
P1014NXN5KHB
✅ 直接替换📋 参考替代料（不在目录中）
P1020NXE
✅ 直接替换📋 参考替代料（不在目录中）
P2020NXE
✅ 直接替换📋 参考替代料（不在目录中）
P1010NXE5KHB 最大额定值与电气特性
| Family | QorIQ P1 |
| Core Architecture | Power Architecture e500v2 (32-bit) |
| Core Count | 1 |
| Core Frequency | 1.0 GHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| Process Technology | 45 nm CMOS |
| Typical Power Dissipation | 1.1 W (typical, per datasheet) |
| Memory Controller | DDR3 / DDR3L with ECC, 64-bit |
| Ethernet MACs | 2x RGMII 10/100/1000 |
| PCI Express | 3x PCIe Gen 2.0 controllers |
| SATA | 2x SATA 2.0 (3 Gbps) |
| USB | USB 2.0 host + PHY |
| Crypto Engine | SEC 4.x (DES/3DES/AES/SHA/RSA/ECC) |
| Other Peripherals | SD/MMC, 2x SPI, 4x I2C, 2x UART, 32 GPIO |
| 封装 | 425-TEPBGA-1 (19x19 mm) |
| 工作温度 | -40C to +105C (Industrial) |
| RoHS 状态 | Compliant |
P1010NXE5KHB 425-tepbga-1 (19x19 mm) 引脚配置指南
P1010NXE5KHB（425-tepbga-1 (19x19 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P1010NXE5KHB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P1010NXE5KHB 适用于 6 应用s: Industrial Router / Gateway, IP Network Camera / Video Surveillance, Network Attached Storage (NAS), Industrial Robotics / Factory Automation, Point-of-Sale (POS) Terminal, Industrial IoT Gateway / Edge Node.
Industrial Router / Gateway
The P1010NXE5KHB is well suited for cost-sensitive industrial router and gateway designs because its 1 GHz e500v2 core delivers sufficient throughput for routing, NAT, and VPN termination while the integrated SEC 4.x engine accelerates IPsec and SSL/TLS without an external crypto chip. The 2x RGMII Gigabit Ethernet MACs provide WAN and LAN ports from a single SoC, and the -40C to +105C industrial temperature grade supports outdoor cabinet and factory-floor deployment. Compared to using a host processor plus a discrete crypto coprocessor, this single-chip integration reduces BOM, PCB area and software stack complexity. Typical power of 1.1 W eliminates the need for active cooling in sealed enclosures, and the DDR3L with ECC controller handles buffer memory for queuing disciplines without external DRAM glue.
推荐
IP Network Camera / Video Surveillance
The P1010NXE5KHB fits IP camera and digital video surveillance designs because its e500v2 core plus integrated peripherals drive a Linux stack with ONVIF, RTSP and H.264 encode offload, while the SEC engine secures the camera's TLS video stream and password authentication. The 2x Gigabit Ethernet MACs support primary IP link plus an optional service port, and the PCIe Gen 2.0 link connects to an external image sensor bridge or ISP. DDR3L with ECC handles video frame buffers reliably. The 1.1 W typical power profile keeps the SoC cool inside small sealed dome or bullet housings, and the industrial -40C to +105C range supports outdoor deployments. Compared to an ARM Cortex-A SoC, the Power Architecture book-E compatibility eases porting of legacy surveillance middleware.
推荐
Network Attached Storage (NAS)
The P1010NXE5KHB is a good fit for entry-level NAS appliances because the e500v2 core runs SMB/NFS/iSCSI protocol stacks, the 2x SATA 2.0 (3 Gbps) ports drive dual HDD/SSD bays without an external RAID controller, and the DDR3L controller with ECC protects file-system metadata integrity. The integrated Gigabit Ethernet MAC provides a 1 Gbps link to the home network, and the SEC engine accelerates SMB3 encryption so file transfers do not bottleneck on software crypto. Compared to x86-based NAS platforms, this single-chip solution reduces cost, idle power and acoustic footprint for home and SOHO segments. The -40C to +105C grade supports deployment in utility rooms and small-business closets.
推荐
Industrial Robotics / Factory Automation
The P1010NXE5KHB suits industrial robotics and factory automation controllers because the e500v2 core runs real-time Linux or VxWorks with EtherCAT master stacks, the 3x PCIe Gen 2.0 links connect to motor-controller FPGAs and vision coprocessors, and the SEC engine secures device-to-cloud telemetry. The -40C to +105C industrial temperature grade is essential for cabinet and shop-floor environments, and the 1.1 W typical power removes the need for forced-air cooling inside sealed robot enclosures. Compared to discrete MCU + comms ASIC designs, integrating the networking, crypto and control logic on one die simplifies EMC compliance and lowers the bill of materials. The DDR3L with ECC controller handles deterministic motion-buffer memory with error detection.
推荐
Point-of-Sale (POS) Terminal
The P1010NXE5KHB fits secure POS terminal applications because the SEC 4.x engine provides hardware-accelerated DES, AES and RSA for PIN encryption, EMV chip-card processing and PCI PTS compliance. The e500v2 core runs the payment application stack, the Gigabit Ethernet MAC supports IP-connected terminals, and the USB 2.0 host connects to printers, barcode scanners and customer displays. DDR3L with ECC keeps transaction records intact, and the industrial -40C to +105C range supports deployment in retail back rooms and outdoor kiosks. Compared to ARM-based POS designs, the Power Architecture book-E MMU and deterministic interrupt latency simplify payment-stack certification.
推荐
Industrial IoT Gateway / Edge Node
The P1010NXE5KHB suits Industrial IoT gateway and edge-node designs because the e500v2 core runs containerized edge workloads with TLS, the SEC engine secures device-to-cloud MQTT or CoAP links, and the 2x Gigabit Ethernet plus 3x PCIe interfaces aggregate fieldbus, Wi-Fi and cellular modem links. DDR3L with ECC buffers time-series telemetry, and the industrial temperature grade covers outdoor cabinet and substation installations. The 1.1 W typical power allows fan-less operation in sealed enclosures, and the rich GPIO plus I2C/SPI/UART mix connects directly to sensors and actuators. Compared to a microcontroller plus separate network processor, the single-SoC design reduces PCB complexity and long-term BOM risk.
推荐
推荐产品汇总
工程参考数据： P1010NXE5KHB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P1010NSE5KHB | P1010NXN5KHB | P1014NXN5KHB | P1020NXE | P2020NXE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA-1 (19x19 mm) | 425-TEPBGA-1 (19x19 mm) - same | 425-TEPBGA-1 (19x19 mm) - same | 425-TEPBGA-1 (19x19 mm) - same | 425-TEPBGA-1 (19x19 mm) - same | 425-TEPBGA-1 (19x19 mm) - same |
| Core Architecture | Power e500v2 | Power e500v2 | Power e500v2 | Power e500v2 | Power e500v2 (dual-core) | Power e500v2 (dual-core) |
| Core Count | 1 | 1 | 1 | 1 | 2 | 2 |
| Crypto Engine | SEC 4.x | SEC 4.x | SEC 4.x | SEC 4.x | SEC 4.x | SEC 4.x |
| Gigabit Ethernet MACs | 2 | 2 | 2 | 2 | 2 | 2 |
| PCI Express | 3x PCIe Gen 2.0 | 3x PCIe Gen 2.0 | 3x PCIe Gen 2.0 | 3x PCIe Gen 2.0 | 3x PCIe Gen 2.0 | 3x PCIe Gen 2.0 |
关键差异点
- Higher core frequency within the P1010 family （对比 P1010NXN5KHB)
- Industrial temperature grade （对比 P1010NSE5KHB)
- Single-chip integration reduces BOM vs PCIe （对比 P1020NXE)
设计说明
The 425-ball TEPBGA at 1.0 mm pitch requires at least a 4-layer PCB with continuous GND planes under the BGA and matched-length DDR3L byte lanes. Follow NXP application note AN4130 for DDR3L trace impedance, length matching and reference clock routing. Place the SerDes reference clock capacitors within 1 mm of the clock pins and isolate analog and digital grounds with a single bridge under the SoC.
Estimated: at 1.0 GHz with the SEC engine active and both GbE links at line rate, total power is approximately 1.1 W typical per the datasheet. Provide a 4-layer board with a solid GND pour and thermal vias under the BGA thermal pad to keep junction temperature below 105C in industrial enclosures. Decouple each power rail with a 100 nF X7R plus a 10 uF ceramic close to the ball, and add a bulk 47 uF tantalum or polymer capacitor on the 1.0 V core rail.
Do not boot from a NAND flash without enabling the on-chip NAND controller boot configuration; the default is SPI NOR. Verify the cfg_rcw_src setting in the Reset Configuration Word matches the actual boot source. DDR3L (1.5 V) vs DDR3 (1.5 V) selection must be set in the DDR controller registers; mismatched voltage stresses the DRAM and causes data corruption.
Route RGMII Gigabit Ethernet traces with 50 ohm controlled impedance and keep length matching within 50 mils on TX/RX pairs. PCIe Gen 2.0 requires 85 ohm differential impedance; reference clock must be within +/-300 ppm. Series capacitors on PCIe TX pairs must be placed within 250 mils of the SoC balls to meet the Gen 2.0 de-emphasis mask.
合规信息
RoHS and lead-free per NXP product page. AEC-Q100 is not applicable for a communications processor in this category. Halogen-free status not stated in verified web data.
