P1014NSN5HFA557 - QorIQ 32-bit Power Arch SoC 800MHz | NXP
料号： P1014NSN5HFA557 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $33 | $33.00 |
| 10 | $28.5 | $285.00 |
| 100 | $24 | $2,400.00 |
| 500 | $21 | $10,500.00 |
| 1,000 | $19 | $19,000.00 |
P1014NSN5HFA557 概述
A QorIQ communications processor is a multicore Power Architecture SoC designed for cost- and power-sensitive networking, industrial control, and secure gateway applications. Within the broader NXP product hierarchy, the P1010/P1014 family sits below the high-end P2020/P2040 dual-core devices and above the value-tier P1010/P1013 single-core parts, occupying the integrated-networking sub-segment of the Power Architecture communications processor roadmap.
Key differentiating features of the P1014 include hardware-accelerated protocol handling for packet processing, integrated SERDES lanes that eliminate external PHYs for GbE/SATA/PCIe, and a flexible SerDes configuration supporting up to 5 lanes. The device operates from a single 1.0 V nominal core supply (range 0.95 V to 1.05 V) with separate I/O and PLL rails, supporting commercial 0 C to +105 C junction temperature.
Typical applications include industrial IoT gateways, factory automation controllers, secure network appliances, fanless embedded routers, and smart-grid infrastructure. The integrated security engine and Trust Architecture support tamper-resistant firmware boot, while the low 4 W typical power envelope enables fanless designs in compact enclosures.
When designing with the P1014, allocate adequate decoupling on every 1.0 V rail and provide a 25 MHz reference clock into the differential SYSCLK pins. Route all high-speed SERDES lanes with controlled-impedance 85 ohm differential pairs and follow the NXP reference board stack-up to maintain signal-integrity margins.
This page synthesizes octopart distributor pricing, octopart cross-reference listings, and practical design notes for the P1014NSN5HFA557, complementing the manufacturer datasheet with engineering insight not found on stock pages.
直接替换替代料： P1014NSN5HFA557 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P1014NSN5HFA557 （相同外形与封装尺寸） ——差异在于 Core Count, Mounting Type, Operating Temperature, Package, Security Engine.
快速对比工具——选择替代料号进行并排对比：
P1014NSN5HFA
✅ 直接替换✓ 有现货
$25.1 / 个
查看数据手册 →P1014NSN5FFA557
✅ 直接替换📋 参考替代料（不在目录中）
P1010NSN5HFA557
✅ 直接替换📋 参考替代料（不在目录中）
P1014NSN5HFA557 最大额定值与电气特性
| Architecture | Power Architecture e500, 32-bit |
| Core Count | 1 (single-core) |
| Core Frequency (max) | 800 MHz |
| DDR3 Memory Controller Speed | 667 MHz |
| Technology Node | 45 nm CMOS |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| 封装 | 425-ball PBGA, 0.8 mm pitch, 19 x 19 mm |
| JEDEC Package Code | S-PBGA-B425 |
| Core Supply Voltage | 1.00 V typ (0.95 V min, 1.05 V max) |
| 工作温度 | 0 C to +105 C |
| GbE Controllers | 2 (RGMII / SGMII) |
| PCIe Controllers | 3 (PCIe Gen 1.1) |
| SATA Interfaces | 2 (SATA 2.0) |
| USB Interface | USB 2.0 (Host / Device / OTG) |
| Security Engine | Integrated (SEC, trusted boot, secure debug) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
P1014NSN5HFA557 s-pbga-b425 引脚配置指南
P1014NSN5HFA557（s-pbga-b425 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P1014NSN5HFA557.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P1014NSN5HFA557 适用于 6 应用s: Industrial IoT Gateway, Secure Network Appliance, Fanless Embedded Router, Smart-Grid Infrastructure, Factory Automation Controller, Networked Storage / NAS SoC.
Industrial IoT Gateway
The P1014NSN5HFA557 fits industrial IoT gateways through its 800 MHz e500 core plus dual GbE controllers and integrated security engine. With 667 MHz DDR3 controller bandwidth, the processor handles protocol conversion (Modbus/TCP, OPC-UA, MQTT) between field devices and cloud backends without external packet buffers, while hardware AES/SHA offload secures north-south traffic. Per NXP QorIQ documentation, the typical 3-5 W power envelope supports sealed, fanless industrial enclosures. Reference designs demonstrate IP-based multi-protocol routing on a single board.
推荐
Secure Network Appliance
For secure network appliances (VPN concentrators, UTM, firewall edge), the P1014NSN5HFA557 supplies 800 MHz of e500 throughput plus the integrated SEC engine with trusted boot, secure debug, and AES/3DES/SHA/RSA acceleration. Three PCIe Gen 1.1 controllers attach crypto accelerator cards or additional NICs, while dual GbE ports provide WAN and LAN segmenting at line rate. Per NXP QorIQ security documentation, run-time integrity checking and tamper-resistant boot meet industrial-hardening requirements.
推荐
Fanless Embedded Router
The P1014NSN5HFA557 in a fanless embedded router benefits from its single 1.0 V core supply and 3-5 W typical power dissipation. With two SGMII GbE ports plus RGMII, the device connects WAN/uplink and LAN/downlink segments, while the DDR3 controller running at 667 MHz sustains NAT/firewall lookup tables. Per the NXP QorIQ industrial design guide, absence of active cooling simplifies dust-proof IP65 enclosures for harsh environments like factory floors and outdoor cabinets.
推荐
Smart-Grid Infrastructure
Smart-grid substation controllers and distribution automation nodes use the P1014NSN5HFA557 to process IEC 61850 GOOSE messages, run DNP3/IP stacks, and enforce NERC-CIP cryptographic requirements. The integrated security engine handles TLS/DTLS sessions for substation-to-control-center links, while hardware ECC on the DDR3 controller detects memory faults in safety-critical relays. Per NXP QorIQ substation references, the part's deterministic interrupt latency and tamper-resistant boot meet utility-grade reliability.
推荐
Factory Automation Controller
The P1014NSN5HFA557 serves factory automation controllers (PLC-class, machine vision gateways) through deterministic e500 execution and abundant SERDES lanes. PCIe attaches frame grabbers or EtherCAT master cards; dual GbE handles PROFINET/EtherCAT ring topology with cut-through switching. Per NXP industrial automation references, hardware ECC on DDR3 detects bit-flip faults from industrial EMI, while the integrated security engine signs firmware updates to prevent field-tampering.
推荐
Networked Storage / NAS SoC
For entry-level networked-attached storage, the P1014NSN5HFA557's two SATA 2.0 ports directly attach HDDs or SSDs, while the 667 MHz DDR3 controller drives RAID parity calculations. The e500 core runs SMB/NFS file services and manages EXT4/JBOD metadata, with hardware SHA offload authenticating block writes. Per NXP storage reference designs, integrated GbE saturates gigabit streaming without CPU bottlenecks, making the P1014 a cost-effective SoC for small-business NAS appliances.
推荐
推荐产品汇总
工程参考数据： P1014NSN5HFA557 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P1014NSN5HFA | P1014NSN5FFA557 | P1010NSN5HFA557 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-ball PBGA (19x19mm) | 425-ball PBGA (19x19mm) - same | 425-ball PBGA (19x19mm) - same | 425-ball PBGA (19x19mm) - same |
| Core Frequency (max) | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| DDR3 Memory Controller Speed | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Core / Architecture | e500 single-core | e500 single-core | e500 single-core | e500 single-core |
| PCIe Controllers | 3 (Gen 1.1) | 3 (Gen 1.1) | 3 (Gen 1.1) | Reduced lane count |
| SATA Interfaces | 2 (SATA 2.0) | 2 (SATA 2.0) | 2 (SATA 2.0) | Reduced/optional |
| Security Engine | Integrated SEC, trusted boot | Integrated SEC, trusted boot | Integrated SEC, trusted boot | Reduced security variant |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | Extended tier (per suffix code) | 0 C to +105 C |
关键差异点
- Higher SERDES feature integration than the P1010 family （对比 P1010NSN5HFA557)
- Trusted boot and secure debug on every part number variant （对比 P1014NSN5FFA557)
- Industrial-grade 0 C to +105 C operating range （对比 Generic Power Architecture MPU alternatives)
设计说明
The P1014 core operates from a 1.0 V nominal supply with 0.95 V-1.05 V tolerance. According to the NXP QorIQ P1014 datasheet, this rail must be sourced from a low-noise DC-DC regulator with under 30 mV pk-pk ripple and a bulk decoupling network of 22 uF + 10 uF ceramic + 0.1 uF high-frequency bypass placed within 25 mm of the BGA balls. Estimated core current draw at 800 MHz: ~3 A typical load; verify transient response on the regulator load step.
With 3-5 W typical dissipation, the 19 x 19 mm PBGA relies on thermal vias under the die-attach pad and inner-layer copper floods for heat spreading. The NXP P1014 hardware design guide recommends 0.3 mm thermal vias on a 0.6 mm grid stitched beneath the package, connecting to at least 4 inner-plane copper layers. Without this, junction temperature can exceed the 105 C ceiling in closed industrial enclosures.
SERDES lanes (PCIe, SGMII, SATA) require controlled-impedance 85 ohm differential routing on the NXP-recommended board stack-up. The P1014 hardware design guide specifies via-back-drill stubs under 0.3 mm for 3 Gbps SATA signals and intra-pair skew under 1 ps. Failure to follow the reference stack-up causes SERDES link training failures that cannot be recovered by firmware tuning.
When migrating software from P1010 to P1014, do not assume SERDES lane mapping is identical; verify the RCW (reset configuration word) lane-to-protocol assignments per the P1014 reference manual. A mismatched RCW causes silent PCIe link failure or SATA PHY mis-detection that appears as an OS-level disk error rather than a boot-time fault.
合规信息
RoHS and lead-free compliance indicated per NXP product family datasheet. AEC-Q100 is not applicable - the part targets industrial/networking rather than automotive.
