P2040NSN1HLB - QorIQ P2 Quad-Core 800MHz | NXP
料号： P2040NSN1HLB ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $185 | $185.00 |
| 10 | $172.5 | $1,725.00 |
| 100 | $158 | $15,800.00 |
| 500 | $142.75 | $71,375.00 |
| 1,000 | $128.4 | $128,400.00 |
P2040NSN1HLB 概述
A QorIQ communications processor is a multicore Power Architecture SoC designed for high-performance packet processing, switching, and routing. It belongs to a broader hierarchy of communications SoCs, which themselves sit within the application-specific standard products (ASSP) class of semiconductors. The P2 family scales between 1 and 4 cores, and the P2040 sits at the top of that range with four cores sharing a coherent fabric.
Key features of the P2040NSN1HLB include four e500mc cores with hardware hypervisor and virtualization support, integrated DDR3/3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen2 controllers, and SerDes lanes for flexible high-speed interconnect. The device is software-compatible with members of the P1 family and all devices in the P3, P4, and P5 QorIQ families, allowing customers to scale the same software stack across multiple performance points.
Architecturally, the P2040 combines an advanced core complex, a CoreNet platform cache, and a high-bandwidth interconnect fabric. This design delivers balanced compute, memory, and I/O bandwidth required by line-rate packet processing workloads. Security services (SEC) and pattern matching engines are present in the silicon but the Non-ENC suffix indicates the cryptographic block is disabled, distinguishing this SKU from SEC-enabled P2040 variants.
Typical applications include enterprise routers, Ethernet switches, wireless base station controllers, network attached storage, industrial control gateways, and unified threat management appliances. The 0°C to 105°C operating range also suits outdoor and factory-floor networking equipment.
When selecting this part, engineers should note the 800 MHz core frequency, the Non-ENC security profile, and the 780-FCPBGA package. The P2040 and P2041 share the same 780-FCPBGA footprint, simplifying board reuse between variants.
This page synthesizes verified distributor availability, drop-in same-package alternatives, and a parameter-by-parameter comparison table that goes beyond the basic manufacturer product page, helping engineers select and source the right QorIQ SKU.
直接替换替代料： P2040NSN1HLB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P2040NSN1HLB （相同外形与封装尺寸） ——差异在于 Memory Controller, Operating Temperature Range, Core Architecture, Maximum Core Frequency, PCI Express.
快速对比工具——选择替代料号进行并排对比：
P2040NSN7MMC
✅ 直接替换📋 参考替代料（不在目录中）
P2040NSE1MMB
✅ 直接替换✓ 有现货
$199 / 个
查看数据手册 →P2041NSN1HLB
✅ 直接替换📋 参考替代料（不在目录中）
P2040NSE1MMB
✅ 直接替换✓ 有现货
$199 / 个
查看数据手册 →P2040NSN1HLB 最大额定值与电气特性
| Family | QorIQ P2 |
| Core Architecture | PowerPC e500mc |
| Number of Cores | 4 |
| 数据总线宽度 | 32-bit |
| Maximum Core Frequency | 800 MHz |
| 工作温度范围 | 0°C to 105°C |
| Encryption Acceleration | Non-ENC (disabled) |
| 封装 | 780-FCPBGA (23x23 mm) |
| 安装类型 | Surface Mount |
| Software Compatibility | P1, P3, P4, P5 QorIQ families |
| Memory Controller | Integrated DDR3/3L |
| Ethernet Interfaces | Multiple Gigabit Ethernet |
| PCI Express | PCIe Gen2 controllers |
| RoHS 状态 | Compliant |
| Lifecycle | Not Recommended for New Designs (NRND) |
P2040NSN1HLB 780-fcpbga (23x23 mm) 引脚配置指南
P2040NSN1HLB（780-fcpbga (23x23 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P2040NSN1HLB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P2040NSN1HLB 适用于 6 应用s: Enterprise Routers, Industrial Ethernet Switches, Wireless Base Station Controllers, Network Attached Storage, Unified Threat Management Appliances, Industrial Control Gateways.
Enterprise Routers
The P2040NSN1HLB is well-matched to enterprise routers because four e500mc cores at 800 MHz deliver combined compute for control-plane and forwarding-plane workloads typical of branch-office and campus gateways. Its integrated DDR3/3L controller sustains multi-gigabit packet buffers, while the multiple Gigabit Ethernet interfaces handle common 1G WAN and LAN uplinks. The Non-ENC profile is acceptable when IPsec/SSL acceleration is offloaded to a discrete security co-processor. Power envelope stays manageable in fan-cooled 1U chassis designs.
推荐
Industrial Ethernet Switches
In managed industrial Ethernet switches, the P2040NSN1HLB drives Layer 2/3 switching fabric and management-plane software simultaneously across its four cores. The 0°C to 105°C operating range supports factory-floor and outdoor cabinet deployments without additional thermal conditioning. The 780-FCPBGA package allows compact switch line-card designs while exposing PCIe Gen2 lanes for stacking or uplink modules. Software compatibility with the wider QorIQ P family lets OEMs reuse stack code across product tiers.
推荐
Wireless Base Station Controllers
The P2040NSN1HLB's combination of four cores and high-bandwidth SerDes fabric suits small-cell and pico-cell base station baseband controllers. Each e500mc core can host a protocol stack instance (L2, L3, OAM), and the integrated DDR3/3L controller feeds real-time packet buffers. The Non-ENC SKU is typically paired with a separate SIM/auth accelerator to keep costs down. The 780-FCPBGA package fits standard small-cell reference designs from NXP ecosystem partners.
推荐
Network Attached Storage
For mid-range Network Attached Storage (NAS) controllers, the P2040NSN1HLB provides enough compute for file-system offload (NFS, iSCSI), RAID management, and SMB/NFS protocol handling. The integrated DDR3/3L controller with ECC support is critical for data integrity in storage workloads, and the Gigabit Ethernet interfaces can be aggregated via bonding for multi-gigabit throughput. Multiple PCIe Gen2 lanes connect to SATA or NVMe storage ASICs. The 0°C to 105°C range supports consumer and prosumer NAS chassis.
推荐
Unified Threat Management Appliances
The P2040NSN1HLB is suitable for Unified Threat Management (UTM) appliances where firewalling, intrusion detection, and basic content filtering run on the same platform. Four e500mc cores at 800 MHz provide enough compute for line-rate firewall processing on multi-gigabit links. Designs that need hardware-accelerated deep-packet inspection can pair the Non-ENC SKU with a dedicated DPI co-processor, or swap to the SEC-enabled P2040NSE1MMB drop-in. The 780-FCPBGA package supports standard UTM reference layouts.
推荐
Industrial Control Gateways
In industrial control gateways and protocol-conversion appliances, the P2040NSN1HLB runs real-time protocol stacks such as Modbus TCP, EtherNet/IP, PROFINET, and OPC UA concurrently. The 0°C to 105°C industrial temperature range handles factory-floor and outdoor cabinet installations. The 780-FCPBGA package fits compact DIN-rail or panel-mount gateway designs. Software compatibility across QorIQ P1, P3, P4, and P5 lets OEMs reuse gateway code when scaling across performance points.
推荐
推荐产品汇总
工程参考数据： P2040NSN1HLB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P2040NSN7MMC | P2040NSE1MMB | P2041NSN1HLB |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 780-FCPBGA (23x23 mm) | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same | 780-FCPBGA (23x23 mm) - same |
| Core Frequency | 800 MHz | 1333 MHz | 800 MHz | 800 MHz |
| Number of Cores | 4 | 4 | 4 | 4 |
| Operating Temperature Range | 0°C to 105°C | -40°C to 105°C | 0°C to 105°C | 0°C to 105°C |
| Encryption Accelerator | Non-ENC (disabled) | Non-ENC (disabled) | ENC (enabled) | Non-ENC (disabled) |
| Core Architecture | PowerPC e500mc | PowerPC e500mc | PowerPC e500mc | PowerPC e500mc |
| Data Bus Width | 32-bit | 32-bit | 32-bit | 32-bit |
| Software Compatibility | QorIQ P1/P3/P4/P5 families | QorIQ P1/P3/P4/P5 families | QorIQ P1/P3/P4/P5 families | QorIQ P1/P3/P4/P5 families |
| Lifecycle Status | NRND | Active | NRND | NRND |
关键差异点
- Drop-in upgrade path to higher core frequency （对比 P2040NSN7MMC)
- Drop-in path to enable hardware encryption （对比 P2040NSE1MMB)
- Pin-compatible with P2041 family for higher integration （对比 P2041NSN1HLB)
设计说明
The 780-FCPBGA package has a relatively high junction-to-ambient thermal resistance, and a four-core 800 MHz part can dissipate several watts under load. Place the device on a board with a continuous ground/power plane directly underneath the BGA and use thermal vias under the exposed die pad to move heat into inner copper layers. In enclosed fanless enclosures, derate ambient temperature by 10°C or add a small heatsink.
Use a high-layer-count PCB (at least 8 layers) with dedicated ground and power planes for the 780-FCPBGA. Match impedance-controlled traces for DDR3/3L, PCIe Gen2, and SerDes lanes, and follow NXP's layout guidelines for length matching within the specified tolerances. Decoupling capacitors must be placed as close as possible to the BGA balls, with a mix of bulk, mid-range, and high-frequency ceramics.
Do not assume the Non-ENC SKU includes the SEC block: the cryptographic accelerator is fused out in hardware and cannot be enabled in software. If a project later requires hardware-accelerated IPsec, SSL, or Kasumi/Snow3G, swap to the drop-in P2040NSE1MMB instead of trying to license or unlock SEC on the Non-ENC part. Also confirm boot ROM configuration matches the silicon revision (r1.1 in this SKU).
合规信息
RoHS and REACH compliance per NXP product documentation; AEC-Q100 not applicable for this communications processor class.