PD-9606GC - 6-Port 90W IEEE 802.3bt PoE Midspan | Microchip
料号： PD-9606GC ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $745 | $745.00 |
| 5 | $715 | $3,575.00 |
| 10 | $685 | $6,850.00 |
| 25 | $655 | $16,375.00 |
| 50 | $625 | $31,250.00 |
PD-9606GC 概述
A Power over Ethernet midspan (also called a PoE injector) is a device that sits between a non-PoE Ethernet switch and end terminals, injecting DC power onto the twisted-pair cabling so that the switch itself does not need PoE capability. The PD-9606GC belongs to the broader midspan family of PoE midspans -> PoE injectors -> PoE power sourcing equipment -> industrial power supplies -> power conversion products. Midspans are used in installations where the existing Ethernet switch is fixed and PoE functionality must be added without replacing it.
Key features of the PD-9606GC include per-port power output of up to 90 W (Type 4), full backward compatibility with 802.3af (15.4 W) and 802.3at (30 W), plug-and-play installation with no configuration required for basic operation, and Microchip's PowerView Pro secure remote management via SNMPv3 over IPv4 or IPv6. Built-in protections include detection, classification, overload, and short-circuit protection per the 802.3bt specification, as well as per-port current limiting.
The internal architecture combines a universal-input AC-to-DC front end that produces a 54 V bulk rail with six independent PoE controller channels. Each channel performs the IEEE 802.3bt handshake, classifies the attached PD, and applies the 54 V rail through current-sense and MOSFET switching. Gigabit data pairs are passed through untouched on the data pairs, while power is injected on the spare pairs (Mode A) or both data and spare pairs (Mode B) as required by the negotiated class.
Typical applications include powering IEEE 802.11ax/802.11ac Wi-Fi 6 access points, PTZ and dome IP cameras, IP videophones, thin clients, digital signage displays, point-of-sale terminals, and small-cell or picocell radio units. Any 802.3bt-compliant high-power end device can be powered without needing a local AC outlet at the endpoint.
When deploying the PD-9606GC, verify that the upstream Ethernet switch supports pass-through data only (the midspan handles all PoE logic), confirm that cabling is rated Category 5e or better, and budget for chassis airflow because the unit dissipates heat proportional to total delivered power (up to 540 W at full 6-port 90 W load).
This page synthesizes distributor pricing, same-brand SKU alternatives, application guidance, and design notes that are not found in the manufacturer datasheet alone.
直接替换替代料： PD-9606GC ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PD-9606GC （相同外形与封装尺寸） ——差异在于 PoE Standard, Data Rate, Compliance, Mounting, Network Management.
快速对比工具——选择替代料号进行并排对比：
PD-9612GC/AC
✅ 直接替换📋 参考替代料（不在目录中）
PD-9624GC/AC
✅ 直接替换📋 参考替代料（不在目录中）
PD-9506GC/AC
✅ 直接替换✓ 有现货
$1140.62 / 个
查看数据手册 →PD-9606GC/AC-US
✅ 直接替换✓ 有现货
$665.3 / 个
查看数据手册 →PD-9606GC/AC-UK
✅ 直接替换📋 参考替代料（不在目录中）
PD-9606GC/AC-EU
✅ 直接替换📋 参考替代料（不在目录中）
PD-9606GC 规格参数（制造商发布）
| Product Type | PoE Midspan Injector |
| Number of Ports | 6 |
| 数据速率 | 10/100/1000 Mbps (Gigabit) |
| Maximum Power Per Port | 90 W (IEEE 802.3bt Type 4) |
| 输出电压 | 54 V nominal |
| PoE Standard | IEEE 802.3bt Type 3 / Type 4 compliant |
| Backward Compatibility | IEEE 802.3af (15.4 W) and 802.3at (30 W) |
| Input Connector | AC inlet (IEC C14) |
| Data Input Connectors | 6 x RJ-45 |
| Data+Power Output Connectors | 6 x RJ-45 |
| Management Interface | SNMPv3, IPv4 / IPv6, PowerView Pro |
| 安装类型 | Rack-mountable 1U enclosure |
| 工作温度 | 0C to +40C |
| Compliance | IEEE 802.3bt, IEEE 802.3at, IEEE 802.3af, RoHS |
| Family | PD-9600GC series |
PD-9606GC 接口与连接器
PD-9606GC 提供制造商发布的以下接口和连接器：功率输入。扩展排针引脚定义、连接器引脚编号和电气限值在制造商文档中定义。
| 功率输入 | IEEE 802.3bt Type 3 / Type 4 compliant |
请参阅 制造商文档 以查看完整的扩展排针引脚和连接器引脚编号。
功率与热特性
| 功率输入 | IEEE 802.3bt Type 3 / Type 4 compliant |
| 工作温度 | 0C to +40C |
PD-9606GC 的功率输入和热参数（由制造商发布）。
典型应用
PD-9606GC 适用于 6 应用s: Wi-Fi 6/6E Access Point Power, PTZ and Dome IP Camera Networks, IP Videophones and Conference Systems, Thin Clients and Digital Signage, Small-Cell and Picocell Radio Units, Point-of-Sale and Retail Terminals.
Wi-Fi 6/6E Access Point Power
Powers multi-radio Wi-Fi 6 and Wi-Fi 6E access points that require 802.3bt Type 4 power. The PD-9606GC's 90 W per port comfortably exceeds the 60-71 W typical draw of high-end APs such as those with internal 4x4:4 radios and 2.5/5/6 GHz capability, eliminating the need for AC outlets at mounting locations. With six ports per chassis, a single PD-9606GC can power an entire AP cluster in an office ceiling or warehouse coverage zone. The midspan injects 54 V on the cable while passing Gigabit data through, simplifying cable management and allowing the upstream switch to remain non-PoE.
推荐
PTZ and Dome IP Camera Networks
Powers outdoor-rated PTZ cameras with heaters, IR illuminators, and motorized zoom/focus that commonly draw 60-80 W peak. The PD-9606GC's per-port 802.3bt Type 4 negotiation ensures cameras with heaters and pan/tilt motors receive full 90 W during cold-start heater surges, while still supporting standard 802.3af/at fixed dome cameras on the same chassis for mixed deployments. Six ports match typical six-camera clusters around building perimeters, parking garages, and large retail floors without external power at each camera mount.
推荐
IP Videophones and Conference Systems
Powers desktop IP videophones and room-based conference systems that demand reliable PoE plus pass-through PC Ethernet. The PD-9606GC's Gigabit pass-through preserves data quality for video conferencing codecs, while 802.3bt Type 4 capability handles videophones with large color displays and embedded cameras that exceed 30 W. A single midspan can support six executive desks or one huddle-room cluster, simplifying IT power management by centralizing AC distribution at the IDF rather than under each desk.
推荐
Thin Clients and Digital Signage
Powers thin-client workstations and digital signage displays that draw 25-45 W each and benefit from a single Ethernet cable for both data and power. The PD-9606GC's 802.3bt negotiation delivers up to 90 W, future-proofing installations for higher-power displays and next-generation thin clients, while remaining compatible with existing 802.3at 30 W signage. Six ports cleanly map to one retail kiosk cluster, one signage row, or six desk-side thin clients without requiring local AC adapters at every endpoint.
推荐
Small-Cell and Picocell Radio Units
Powers indoor small-cell and picocell radio units used by mobile operators and enterprises to densify 4G/5G coverage. These radios typically consume 40-80 W with active RF chains and benefit from a centralized power source at the cabling closet. The PD-9606GC's 802.3bt Type 4 90 W per port meets the high-power envelope, and the six-port density supports a complete in-building radio deployment on one midspan. SNMPv3 PowerView Pro management lets the operator monitor per-radio power consumption remotely.
推荐
Point-of-Sale and Retail Terminals
Powers modern POS terminals with built-in receipt printers, customer-facing displays, and barcode scanners that exceed legacy 802.3at power limits. The PD-9606GC's six ports map to a small retail checkout lane set, while its 802.3bt Type 4 capability supports terminals with dual displays and integrated payment devices. Centralized midspan power simplifies PCI-DSS scope by keeping AC outlets inside the back-office IDF, and SNMPv3 monitoring allows IT staff to track power consumption per terminal for capacity planning.
推荐
推荐产品汇总
工程参考数据： PD-9606GC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PD-9612GC/AC | PD-9624GC/AC | PD-9506GC/AC | PD-9606GC/AC-US | PD-9606GC/AC-UK |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 1U rack chassis (6-port) | 1U rack chassis (12-port) | 1U rack chassis (24-port) | 1U rack chassis (6-port) | 1U rack chassis (6-port, US cord) | 1U rack chassis (6-port, UK cord) |
| Number of Ports | 6 | 12 | 24 | 6 | 6 | 6 |
| Max Power Per Port | 90 W (802.3bt Type 4) | 90 W (802.3bt Type 4) | 90 W (802.3bt Type 4) | 60 W (802.3bt Type 3) | 90 W (802.3bt Type 4) | 90 W (802.3bt Type 4) |
| Output Voltage | 54 V nominal | 54 V nominal | 54 V nominal | 54 V nominal | 54 V nominal | 54 V nominal |
| Data Rate | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Total Power Budget | 540 W (6 x 90 W) | 1080 W (12 x 90 W) | 2160 W (24 x 90 W) | 360 W (6 x 60 W) | 540 W (6 x 90 W) | 540 W (6 x 90 W) |
| Management | PowerView Pro SNMPv3 IPv4/IPv6 | PowerView Pro SNMPv3 IPv4/IPv6 | PowerView Pro SNMPv3 IPv4/IPv6 | PowerView Pro SNMPv3 IPv4/IPv6 | PowerView Pro SNMPv3 IPv4/IPv6 | PowerView Pro SNMPv3 IPv4/IPv6 |
| Power Cord Included | No (PD-9606GC/AC bare) | No | No | No | Yes (US NEMA 5-15P) | Yes (UK BS 1363) |
关键差异点
- True 90 W Type 4 with backward compatibility to 802.3af/at （对比 PD-9506GC/AC)
- Compact 6-port 1U form factor （对比 PD-9612GC/AC)
- SNMPv3 IPv4/IPv6 PowerView Pro management （对比 Non-managed midspans)
设计说明
Estimated: At full 6-port 90 W load the PD-9606GC draws roughly 600 W from the AC mains (90% typical efficiency x 540 W DC output). Plan rack PDU capacity with at least 25% headroom above the steady-state draw to accommodate inrush on cold-start heater-equipped cameras and APs. The IEC C14 inlet accepts a standard C13 cable; for high-temperature installations verify the cord rating.
Estimated: With 540 W total dissipation across the 1U chassis the PD-9606GC exhausts warm air at the rear. Ensure at least 1U of empty rack space above and below the unit, do not stack it directly above another heat-generating device, and confirm the ambient rack intake temperature stays below 40C to match the published operating range. Failure to provide clearance can trigger internal thermal protection and per-port shutdown.
Cable Category 5e or better is required for 802.3bt Type 4 90 W operation; lower categories (Cat 5 or Cat 3) will cause voltage drop and classification failures on long cable runs. Per the PD-96XXGC user guide, the maximum cable length from midspan to PD is 100 m (328 ft) per the IEEE spec. Plan conduit runs and patch panel layouts accordingly, and label each port at both ends to simplify PowerView Pro remote mapping.
Common pitfalls: (1) connecting a non-PoE device directly to the data+power output port without checking compatibility - the midspan will detect no valid PD signature and skip power, but a legacy 802.3af/at-only device will not draw full 90 W; (2) stacking multiple midspans in a sealed rack without airflow - thermal shutdown will occur; (3) forgetting that the upstream switch must be Gigabit-capable if any attached PD negotiates 1000 Mbps pass-through; (4) ignoring the SNMPv3 default credentials on initial setup - change community strings before connecting to a production network.
合规信息
IEEE 802.3bt Type 3/Type 4 compliant and IEEE 802.3af/at backward compatible per the PD-96XXGC datasheet. RoHS compliant per Microchip product page. AEC-Q100 not applicable - this is an indoor midspan chassis product, not an automotive-qualified IC.