PEX8664-AA50RBCF - 64-Lane PCIe Gen 2 Switch | Broadcom
料号: PEX8664-AA50RBCF ✓ 量产中PEX8664-AA50RBCF 概述
A PCI Express switch is a fabric-building semiconductor that accepts PCIe traffic from an upstream host connection and routes it across multiple downstream links. It belongs to the PCI Interface IC and semiconductor hierarchy, where the PEX8664 combines protocol switching, lane management, configuration handling, and high-speed differential I/O in one highly integrated device. Multi-host operation allows system designers to partition downstream resources into separate domains and use doorbell registers to coordinate status and failover behavior.
The PEX8664-AA50RBCF is identified by Broadcom and its distributor listings as a 64-lane, 16-port PCI Gen 2 switch. Its 1156-FCBGA package is intended for dense, multilayer PCB layouts and requires careful escape routing, reference-plane management, power delivery, and thermal design. Because the package exposes a very large number of high-speed contacts, board designers should follow the manufacturer’s ball map, reference design, and recommended stack-up rather than infer connectivity from generic package conventions.
The switch is relevant to data-center appliances, enterprise storage systems, industrial controllers, and communication equipment where a single root complex would otherwise need many discrete routing and switching functions. Its 64 lanes can be allocated among 16 downstream ports, allowing multiple NVMe storage devices, network controllers, acceleration devices, or legacy PCI Express devices to share a central switching fabric.
Broadcom documents multi-host and failover operation for the PEX 8664 family. In failover mode, the designated surviving host can disable the upstream connection associated with a failed host and reprogram the affected downstream ports into its own domain. This architecture supports greater availability, but software must coordinate ownership and resource assignment correctly to prevent conflicting accesses to shared endpoints.
Design implementation should treat this as a high-speed, high-pin-count device rather than a conventional interface IC. Differential pairs require continuous reference planes and controlled impedance, while multiple supply rails may require distributed decoupling and dedicated power planes. Thermal performance depends on both the package exposed-pad arrangement and the PCB copper available for heat spreading. Validate final layer count, via transitions, connector escape geometry, power integrity, and signal integrity using the manufacturer reference design and simulation tools.
This page combines the confirmed PCIe Gen 2 switch specifications, package information, sourcing context, drop-in candidates, and implementation guidance in a format intended to accelerate engineering review. The PEX8664-AA50RBCF is best suited to systems whose architecture, PCB resources, and firmware already support a large PCI Express switching fabric.
直接替换替代料: PEX8664-AA50RBCF ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PEX8664-AA50RBCF (相同外形与封装尺寸) ——差异在于 Device Classification, PCI Express Generation, Package.
PEX8664-AA50RBCG
✅ 直接替换联系询价
查看数据手册 →PEX8664-AA50BCF
✅ 直接替换📋 参考替代料(不在目录中)
PEX8649-AA50RBCF
✅ 直接替换📋 参考替代料(不在目录中)
PEX8664-AA50RBCF 最大额定值与电气特性
| Product Type | PCI Express Gen 2 switch IC |
| PCI Express Generation | Gen 2 |
| PCI Express Data Rate | 5.0 GT/s |
| Total Lane Count | 64 lanes |
| Port Count | 16 ports |
| 封装 | 1156-FCBGA (35 x 35 mm) |
| 安装类型 | Surface mount |
| Switch Architecture | Multi-host PCI Express switch |
| Multi-Host Support | Yes |
| Failover Support | Yes |
| Host Status Coordination | Doorbell registers |
| Device Classification | PCI Interface IC |
PEX8664-AA50RBCF 1156-fcbga (35 x 35 mm) 引脚配置指南
PEX8664-AA50RBCF(1156-fcbga (35 x 35 mm) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PEX8664-AA50RBCF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PEX8664-AA50RBCF 适用于 6 应用s: NVMe Storage Appliance, Enterprise Multi-Host Server, Industrial PCIe Control System, PCIe Network Adapter System, Test and Measurement Chassis, Secure Network Appliance.
NVMe Storage Appliance
The PEX8664-AA50RBCF fits storage appliances that need several PCIe Gen 2 endpoints behind a shared switching fabric. Its 64 lanes and 16 ports provide a practical topology for NVMe controllers, RAID engines, and network-facing adapters rather than forcing the root complex to fan out directly. The switch operates at 5.0 GT/s and supports multi-host partitioning, allowing separate host domains to receive selected downstream resources. A production design must map lane widths, validate PCIe link training, confirm endpoint ordering, and implement the required switch-management and failover software before deployment.
推荐
Enterprise Multi-Host Server
The PEX8664-AA50RBCF is suitable for enterprise systems in which multiple compute hosts must access differentiated groups of PCIe resources. The 16-port, 64-lane switch can divide downstream devices into host domains, while Broadcom’s documented failover operation allows a surviving host to take control of ports associated with a failed host. This requires coordinated discovery, ownership tables, doorbell handling, and software recovery. Thermal and signal-integrity validation should use the manufacturer reference design, particularly around the 35 x 35 mm FCBGA and its high-speed differential lanes.
推荐
Industrial PCIe Control System
Industrial controllers that combine motion, machine vision, communications, and data-acquisition peripherals can use the PEX8664-AA50RBCF as a centralized PCIe fabric. The 64-lane capacity permits multiple endpoints to operate behind one host interface, while the 16-port topology simplifies physical routing compared with a collection of unrelated point-to-point links. For industrial deployment, verify the exact operating-temperature grade, isolation strategy, input protection, watchdog behavior, and long-term device availability. The FCBGA footprint also demands a stable multilayer PCB process and controlled assembly qualification.
推荐
PCIe Network Adapter System
The PEX8664-AA50RBCF can serve as the central fabric in a communication appliance containing multiple PCIe network controllers, storage devices, and service processors. Its 64 lanes and 16 ports offer more expansion capacity than a small endpoint switch, while the multi-host capability can isolate traffic and management responsibilities. Designers should assign lane and port budgets explicitly to avoid oversubscription, document peer-to-peer routing rules, and confirm that the selected controllers support the intended PCIe topology. The 1156-FCBGA assembly requires careful return-path continuity, connector escapes, and power-plane distribution.
推荐
Test and Measurement Chassis
A modular test-and-measurement chassis can place acquisition, signal-conditioning, communication, and timing peripherals behind the PEX8664-AA50RBCF. The device’s 16 downstream ports support a larger instrument population than a conventional endpoint switch, while 64 lanes allow multiple widths to be combined according to system needs. For dependable measurement accuracy, isolate PCIe traffic from sensitive analog sections, maintain short return paths for high-speed links, and separate noisy switching power from sensitive supplies. Firmware should inventory endpoints and provide deterministic recovery after host or link faults.
推荐
Secure Network Appliance
Security appliances often combine several acceleration, storage, and network adapters behind a host processor. The PEX8664-AA50RBCF provides a 64-lane PCIe Gen 2 switching backbone with 16 downstream ports, allowing those functions to be organized into controlled domains. Multi-host partitioning can reduce contention between security workloads, but it also requires accurate endpoint ownership and controlled failover procedures. The system integrator should validate trusted boot and management paths, isolate configuration interfaces, and ensure the PCB has adequate copper and airflow for sustained operation of the high-performance FCBGA device.
推荐
推荐产品汇总
工程参考数据: PEX8664-AA50RBCF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PEX8664-AA50RBCG | PEX8664-AA50BCF | PEX8649-AA50RBCF |
|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom |
| Device Classification | PCI Interface IC / PCIe switch | PCI Interface IC / PCIe switch | PCI Express Gen 2 switch | PCI Express switch |
关键差异点
- High PCIe fan-out for embedded systems (对比 PEX8649-AA50RBCF)
- Multi-host partitioning and failover architecture (对比 PEX8664-AA50RBCG)
- PCI Express Gen 2 operation at 5.0 GT/s (对比 PEX8664-AA50BCF)
设计说明
Implement the PEX8664-AA50RBCF with the manufacturer’s reference stack-up, ball map, and escape-routing geometry. Every PCIe lane requires a continuous return path beneath its differential pair, and layer transitions should use adjacent ground or power planes to limit crosstalk and impedance discontinuities. Keep connector and package escapes short where the architecture permits, avoid vias beneath high-speed pairs where possible, and validate the final routing with channel simulation using the actual PCB stack-up rather than generic rules of thumb.
Plan the power tree from the manufacturer supply requirements, including rail separation, startup order, current capacity, and decoupling placement. The 1156-FCBGA requires dense via connections into inner power planes, but via current and return inductance must still be evaluated at switching and load-transient frequencies. Place required high-frequency capacitors directly at the relevant supply and ground balls, provide additional bulk energy near the device, and verify voltage droop during endpoint training and failover transitions with worst-case workload assumptions.
Treat the 35 x 35 mm FCBGA as a major heat source and design both package-side and board-side heat spreading before placement. Use the manufacturer thermal characterization data and the actual PCB copper area, layer count, airflow, and neighboring heat sources to estimate junction temperature. Thermal vias should connect exposed thermal balls to an internal copper plane, but their placement must not interfere with high-speed return paths. Validate the assembled board in its enclosure because board-level temperature rise can differ substantially from junction-limit calculations.
Avoid treating related PEX8664 or PEX8649 ordering codes as automatic substitutes. Confirm the exact package, ball map, lane mapping, supply rails, configuration interface, multi-host behavior, and supported PCIe generation for every proposed replacement. Also validate that the endpoint topology does not oversubscribe upstream bandwidth and that firmware can perform host discovery, doorbell coordination, domain partitioning, and failover recovery. A package drawing match alone is not sufficient to establish functional drop-in compatibility.
合规信息
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was included in the product information. AEC-Q100 is not applicable because the PEX8664-AA50RBCF is a general-purpose PCI Express switch rather than an automotive-qualified device.