PI7C9X440SLBFDE PCIe to USB 2.0 Host Controller | Diodes
料号: PI7C9X440SLBFDE ✓ 量产中PI7C9X440SLBFDE 概述
A PCI Express to USB 2.0 host controller is an interface IC that bridges a PCI Express host system with downstream USB 2.0 devices. Within the broader semiconductor hierarchy, this device belongs to the interface-controller class, combining a PCI Express interface with a USB host interface for systems that need external peripheral connectivity without relying on a discrete add-in card.
The principal product characteristics are its PCI Express-to-USB 2.0 bridging function, USB 2.0 host-controller implementation, and 128-pin LQFP package. Diodes describes the PI7C9X440SL family as a cost-effective solution that can be used in volume servers, storage systems, embedded equipment, medical products, industrial automation, networking systems, IP television equipment, peripherals, and PC add-in cards. The device also targets low-power, lead-free, and green-system requirements.
The controller is useful when a system designer needs to expose conventional USB peripherals through a PCI Express-based architecture. Its implementation is most relevant to embedded and industrial equipment, where a dedicated USB host interface can simplify external data-transfer, configuration, storage, and service connections. Firmware, operating-system support, driver availability, and the surrounding PCI Express and USB signal paths must be validated for the target platform before production release.
Use the manufacturer's pin-description table and application circuit when assigning board traces. High-speed PCI Express and USB differential pairs require controlled impedance, continuous reference planes, minimized stub lengths, and placement away from switching power-conversion nodes. The 14 x 14 mm LQFP also requires adequate thermal copper and careful examination of high-speed signal return paths.
This page combines manufacturer positioning with purchasing guidance, application analysis, practical board-layout considerations, and an engineering comparison of identified related devices. It is intended to help hardware engineers evaluate interface compatibility before committing the PI7C9X440SLBFDE to a new PCI Express and USB 2.0 design.
直接替换替代料: PI7C9X440SLBFDE ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PI7C9X440SLBFDE (相同外形与封装尺寸) ——差异在于 Lead-Free Status, Package, Product Type.
PI7C9X440SLBFDE-2017
✅ 直接替换📋 参考替代料(不在目录中)
PI7C9X440SLBFDEX
✅ 直接替换联系询价
查看数据手册 →PI7C9X440SLBFDE 最大额定值与电气特性
| Product Type | PCI Express to USB 2.0 Host Controller |
| Manufacturer | Diodes Incorporated |
| Upstream Interface | PCI Express |
| Downstream Interface | USB 2.0 Host |
| USB Version | USB 2.0 |
| PCI Express Link | PCI Express |
| 封装 | 128-pin LQFP |
| Package Body Size | 14 x 14 mm |
| 安装类型 | Surface Mount |
| 引脚数量 | 128 pins |
| Shipping Format | Tray |
| Lead-Free Status | Lead-free |
| Green-System Design | Supports low-power, lead-free, and green system requirements |
PI7C9X440SLBFDE 14 x 14 mm 引脚配置指南
PI7C9X440SLBFDE(14 x 14 mm 封装)的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装,请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据: PI7C9X440SLBFDE.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PI7C9X440SLBFDE 适用于 6 应用s: Embedded PCI Express USB Expansion, Industrial Automation Controller, Server and Storage USB Connectivity, Medical Equipment Data Interface, Network and IP Television Peripheral Hub, PCI Add-In Card USB 2.0 Port Expansion.
Embedded PCI Express USB Expansion
The PI7C9X440SLBFDE fits an embedded PCI Express platform that must expose USB 2.0 host ports for service, configuration, data-transfer, or legacy peripheral connections. Its PCI Express upstream interface and USB 2.0 downstream host function provide a dedicated bridge within a 128-pin, 14 x 14 mm LQFP. The design should follow the manufacturer's reference circuit for reference-clock and decoupling arrangements, while the board layout preserves controlled-impedance routing for both high-speed interfaces. Platform support for the controller, including firmware and operating-system drivers, is as important as the electrical pin compatibility.
推荐
Industrial Automation Controller
The PI7C9X440SLBFDE is suitable for industrial automation equipment that uses a PCI Express processor and requires local USB 2.0 connectivity for programming, diagnostics, sensors, or service tools. Diodes identifies industrial automation among the intended PI7C9X440SL system markets. Use the 128-LQFP version only after confirming temperature, power, and long-term lifecycle requirements for the equipment enclosure. Differential signal routing, solid grounding, and separation from switching regulators are essential because industrial controllers often combine sensitive USB data paths with high-current actuator outputs.
推荐
Server and Storage USB Connectivity
The PI7C9X440SLBFDE can add dedicated USB 2.0 host functionality to volume servers, storage appliances, or peripheral subsystems built around PCI Express. The controller is aimed at cost-sensitive systems rather than new USB 3.x designs, making it most appropriate where USB 2.0 devices remain the established interface. In a storage chassis, maintain short USB traces and controlled reference planes while keeping the bridge away from inductors and high-di/dt power paths. Validate enclosure airflow and thermal performance because the 128-LQFP controller sits close to dense power-conversion and storage circuitry.
推荐
Medical Equipment Data Interface
The PI7C9X440SLBFDE can support USB 2.0 service and data connections in medical equipment based on PCI Express computing hardware. The manufacturer identifies medical systems as a PI7C9X440SL application area, but the complete device still requires application-specific safety and regulatory validation. Keep USB and PCI Express routing electrically isolated from patient-interface circuits according to the system architecture, and avoid long unprotected cable routes. The controller's role is peripheral connectivity rather than direct signal acquisition, so the host platform must handle data validation and device-level safety functions.
推荐
Network and IP Television Peripheral Hub
The PI7C9X440SLBFDE suits network appliances and IP television systems that need a PCI Express-to-USB 2.0 bridge for setup, external storage, keyboards, or service peripherals. Diodes lists networking, IP television, and peripherals among the PI7C9X440SL target applications. Place the controller near the connector-entry points where practical, use via stitching to maintain high-speed return paths, and keep copper structures continuous under the LQFP. System-level testing should include hot-plug behavior, enumeration under the intended operating system, and EMI testing with representative external cables attached.
推荐
PCI Add-In Card USB 2.0 Port Expansion
The PI7C9X440SLBFDE is directly relevant to PCI add-in cards designed to add USB 2.0 host ports to desktop or embedded systems. Its 128-pin LQFP package supports a conventional component-placement strategy while the PCI Express and USB differential pairs connect to edge-card and external connectors. Keep the USB pair geometry symmetric and route the PCI Express pair away from the connector and card-retention structures. Full compliance and EMC testing must be performed with the final card layout, because connector placement and card-edge transitions can dominate high-speed signal integrity.
推荐
推荐产品汇总
工程参考数据: PI7C9X440SLBFDE ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PI7C9X440SLBFDE-2017 | PI7C9X440SLBFDEX |
|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) | 128-LQFP (14 x 14 mm) |
| Product Function | PCI Express to USB 2.0 Host Controller | PCI Express to USB 2.0 Host Controller | PI7C9X440SL family controller |
| USB Interface | USB 2.0 Host | USB 2.0 Host | USB 2.0 Host |
| PCI Express Interface | PCI Express | PCI Express | PCI Express |
| Pin Count | 128 pins | 128 pins | 128 pins |
关键差异点
- Identified same-family ordering option in the original 128-LQFP footprint (对比 PI7C9X440SLBFDE-2017)
- Primary family ordering code for the specified PCI Express-to-USB 2.0 bridge role (对比 PI7C9X440SLBFDEX)
- Targeted fit for embedded, industrial, server, storage, and medical interfaces (对比 PI7C9X440SLBFDE-2017)
设计说明
Route the PCI Express and USB differential pairs as controlled-impedance, tightly coupled traces with continuous reference planes beneath them. Avoid vias where possible, and place the controller and connector interfaces to minimize the total trace length. Keep switching-regulator nodes, inductors, and high-current return paths away from these pairs because displacement current can couple into the USB receive path and cause enumeration or data-integrity errors.
Use the reference power network and decoupling arrangement shown in the PI7C9X440SL datasheet for every supply rail. Place the smallest decoupling capacitors directly at the relevant device pins and provide additional bulk capacitance where the reference circuit specifies it. Verify the rail tolerances, startup sequencing, and current budget for the complete interface implementation; adequate nominal voltage does not guarantee stable operation during load transients.
The 128-pin LQFP requires fine-pitch assembly and careful via-in-pad or via-next-to-pad strategy. Match pad pitch and solder-mask geometry to the manufacturer land pattern rather than a generic 128-pin library footprint. Plan a stable ground connection under the package, provide thermal copper where required, and inspect assembled joints optically because fine-pitch bridges are difficult to correct after enclosure installation.
Do not treat a similar PCIe-to-USB controller as a drop-in replacement without checking every pin, supply rail, reference clock, firmware image, driver, and signal specification. USB 2.0 performance also depends on the host software and connected-device behavior, not only the bridge IC. Verify hot-plug handling, enumeration, power management, and peripheral compatibility on the intended operating system before releasing the production board.
合规信息
Diodes describes the PI7C9X440SL family as a low-power, lead-free, and green-system solution. AEC-Q100 is not applicable to this general-purpose interface controller. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the manufacturer or relevant declarations.