PIC16C554T-04/SS - 8-Bit OTP MCU, 896B EPROM, 20-SSOP | Microchip
料号： PIC16C554T-04/SS ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $1.76 | $1.76 |
| 10 | $1.58 | $15.80 |
| 100 | $1.42 | $142.00 |
| 500 | $1.28 | $640.00 |
| 1,000 | $1.14 | $1,140.00 |
PIC16C554T-04/SS 概述
A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (ROM/Flash/OTP), working RAM, and peripheral interfaces on one silicon die. Within the broader taxonomy, an MCU is a sub-class of microprocessor ICs and a member of the embedded computing family. The PIC16C5xx family, introduced in the early 1990s, uses a 12-bit instruction word RISC core and remains popular for cost-sensitive, deterministic, low-power embedded applications where modern Cortex-M-class parts would be overkill.
Key features of the PIC16C554T-04/SS include a 4 MHz maximum oscillator input with a 200 ns instruction cycle, an 8-bit timer/counter, a watchdog timer (WDT) with on-chip RC oscillator, power-on reset (POR), and power-saving SLEEP mode. The instruction set comprises 33 single-word, single-cycle instructions, and the device supports external oscillator operation with configurable clock modes.
Architecturally, the part uses a Harvard memory layout with separate program and data buses, a two-stage pipeline, and a fixed 8-level hardware stack. Its ultra-compact OTP memory suits low-volume production, prototyping, and legacy design maintenance where code updates are infrequent.
Typical applications include appliance control, sensor interface modules, LED drivers, remote controls, low-end security keypads, and simple motor-control user interfaces. The PIC16C554 family is well suited when a small, proven, deterministic controller is preferred over a larger Flash MCU. Designers should note that the 'T' suffix indicates tape-and-reel packaging, and the 896-byte OTP memory cannot be electrically erased — verified firmware is required before programming.
直接替换替代料： PIC16C554T-04/SS ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC16C554T-04/SS （相同外形与封装尺寸） ——差异在于 Program Memory Size, Package, Program Memory Type, Watchdog Timer, Operating Temperature Range.
快速对比工具——选择替代料号进行并排对比：
PIC16C554-04I/SS
✅ 直接替换✓ 有现货
$1.45 / 个
查看数据手册 →PIC16C554-04/SS
✅ 直接替换✓ 有现货
$1.55 / 个
查看数据手册 →PIC16C554-20I/SS
✅ 直接替换✓ 有现货
$1.82 / 个
查看数据手册 →PIC16C554T-04I/SS
✅ 直接替换✓ 有现货
$1.09 / 个
查看数据手册 →PIC16C554T-04E/SS
✅ 直接替换✓ 有现货
$2.85 / 个
查看数据手册 →PIC16C554T-04/SS 最大额定值与电气特性
| Architecture | PIC16 8-bit RISC |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 896 B (512 x 14) |
| RAM Size | 80 B |
| 最大时钟频率 | 4 MHz |
| Instruction Cycle | 200 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Number of I/O Pins | 13 |
| 封装 | 20-pin SSOP (SS) |
| 安装类型 | Surface Mount |
| 工作温度范围 | 0 C to +70 C (Commercial) |
| Timer/Counters | 1 x 8-bit |
| Watchdog Timer | Yes (on-chip RC oscillator) |
| Power-On Reset | Yes |
| Instruction Set Size | 33 single-word instructions |
| RoHS 状态 | Compliant |
| Packaging | Tape & Reel (T) |
PIC16C554T-04/SS 引脚配置
| 引脚 1 | RA2 — Bidirectional I/O, Port A bit 2 |
| 引脚 2 | RA3 — Bidirectional I/O, Port A bit 3 |
| 引脚 3 | RA4/T0CKI — Bidirectional I/O / Timer0 clock input |
| 引脚 4 | MCLR — Master Clear reset input (active low) |
| 引脚 5 | VSS — Ground reference |
| 引脚 6 | RB0/INT — Bidirectional I/O, Port B bit 0 / external interrupt |
| 引脚 7 | RB1 — Bidirectional I/O, Port B bit 1 |
| 引脚 8 | RB2 — Bidirectional I/O, Port B bit 2 |
| 引脚 9 | RB3 — Bidirectional I/O, Port B bit 3 |
| 引脚 10 | RB4 — Bidirectional I/O, Port B bit 4 |
| 引脚 11 | RB5 — Bidirectional I/O, Port B bit 5 |
| 引脚 12 | RB6 — Bidirectional I/O, Port B bit 6 |
| 引脚 13 | RB7 — Bidirectional I/O, Port B bit 7 |
| 引脚 14 | VSS — Ground reference (secondary) |
| 引脚 15 | OSC2/CLKOUT — Oscillator output / clock out |
| 引脚 16 | OSC1/CLKIN — Oscillator input / external clock in |
| 引脚 17 | RA0 — Bidirectional I/O, Port A bit 0 |
| 引脚 18 | RA1 — Bidirectional I/O, Port A bit 1 |
| 引脚 19 | VSS — Ground reference |
| 引脚 20 | VDD — Positive supply voltage (3.0–5.5 V) |
典型应用
PIC16C554T-04/SS 适用于 6 应用s: Appliance Control Boards, Remote Control Transmitters, LED Display Drivers, Security Keypads and Access Modules, Sensor Interface Modules, Motor-Control User Interfaces.
Appliance Control Boards
The PIC16C554T-04/SS is well suited to appliance control boards such as washing-machine timers, microwave oven user interfaces, and rice-cooker controllers. Its 896-byte OTP memory holds the small state-machine firmware typical of these designs, and the 13 I/O pins directly drive seven-segment LEDs, keypads, and relay coils without external logic. Each pin sinks up to 25 mA per the Microchip datasheet, eliminating the need for discrete transistor drivers. Compared with a Flash MCU, the OTP cost advantage is meaningful when the firmware is finalized and production volumes exceed tens of thousands of units.
推荐
Remote Control Transmitters
The PIC16C554T-04/SS fits IR/RF remote-control transmitters where the firmware is fixed and BOM cost dominates. Its 4 MHz oscillator supports 200 ns instruction execution, easily generating standard 38 kHz carrier waveforms for IR modulation. The 80-byte RAM accommodates button-debounce state and transmission buffers, while the SLEEP mode with watchdog wake-up extends battery life in standby. Per the Microchip PIC16C554 datasheet, supply current drops to a few microamps in SLEEP, making the part practical for coin-cell-powered remotes.
推荐
LED Display Drivers
In LED matrix and seven-segment display drivers, the PIC16C554T-04/SS multiplexes rows and columns using its 13 I/O pins and a software PWM loop. The 200 ns instruction cycle keeps refresh rates above 100 Hz, eliminating visible flicker in 8×8 matrices. Each I/O pin sinks 25 mA directly, so low-current LEDs can be driven without external transistors. For higher-current strings, an external driver such as the ULN2003A is added — the MCU remains the timing master. This architecture is common in scrolling-message signs and indicator panels.
推荐
Security Keypads and Access Modules
The PIC16C554T-04/SS is widely deployed in low-cost security keypads and access-control modules where deterministic response and OTP firmware protection matter. Its 80-byte RAM stores PIN buffers and debounce state, while the 896-byte OTP holds the authentication logic that is difficult to reverse-engineer compared with Flash. The watchdog timer detects code lockup and resets the MCU, hardening the system against firmware hangs. The 5 V supply also drives backlit keypads directly without level-shifters.
推荐
Sensor Interface Modules
The PIC16C554T-04/SS serves as a low-cost front-end for sensor interface modules such as thermistor readers, photodiode samplers, and switch-debounce panels. With a 4 MHz clock, it samples digital sensors via polled GPIO at rates exceeding 10 kS/s, suitable for HVAC airflow monitors and water-leak detectors. The integrated watchdog timer resets the MCU on firmware faults, critical in unattended sensor installations. For designs requiring analog inputs, an external ADC such as the MCP3002 can be added over a bit-banged SPI interface.
推荐
Motor-Control User Interfaces
In small motor-control user-interface panels — such as fan-speed selectors, drill torque dials, and treadmill consoles — the PIC16C554T-04/SS reads encoder inputs and button states, then drives indicator LEDs and low-side MOSFETs via its 25 mA I/O pins. The 4 MHz execution rate handles quadrature decoding and PWM generation for variable-speed drives. Because the firmware is locked in OTP, manufacturers protect calibration constants and proprietary speed curves from end-user modification. The commercial 0 °C to +70 °C grade suits indoor appliance environments.
推荐
推荐产品汇总
工程参考数据： PIC16C554T-04/SS ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16C554-04I/SS | PIC16C554-04/SS | PIC16C554-20I/SS | PIC16C554T-04I/SS | PIC16C554T-04E/SS |
|---|---|---|---|---|---|---|
| Package | 20-SSOP (SS) | 20-SSOP (SS) - same | 20-SSOP (SS) - same | 20-SSOP (SS) - same | 20-SSOP (SS) - same | 20-SSOP (SS) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 20 MHz | 4 MHz | 4 MHz |
| Program Memory | 896 B OTP | 896 B OTP | 896 B OTP | 896 B OTP | 896 B OTP | 896 B OTP |
| RAM Size | 80 B | 80 B | 80 B | 80 B | 80 B | 80 B |
| Temperature Grade | Commercial 0C to +70C | Industrial -40C to +85C | Commercial 0C to +70C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C |
| Packaging Form | Tape & Reel (T) | Tube | Tube | Tube | Tape & Reel (T) | Tape & Reel (T) |
| Supply Voltage | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
关键差异点
- Tape-and-reel packaging for high-volume SMT assembly （对比 PIC16C554-04/SS)
- Commercial temperature grade optimized for indoor appliances （对比 PIC16C554T-04I/SS)
- 4 MHz tuning optimized for deterministic control loops （对比 PIC16C554-20I/SS)
设计说明
The PIC16C554T-04/SS uses OTP EPROM, not Flash — once programmed, the memory cannot be electrically erased. Prototype and validate the firmware on a Flash-based sibling (e.g. PIC16F15344) before committing code to OTP parts. Per the Microchip datasheet, a failed bit can only be re-programmed if the new bit is a '0' (programmed state); reverting to '1' requires UV erase, which the SSOP package does not expose.
Place a 0.1 µF ceramic decoupling capacitor within 5 mm of the VDD pin (pin 20) and a bulk 10 µF electrolytic on the supply rail. The Microchip PIC16C554 datasheet recommends separating analog and digital VDD traces even though the MCU itself is fully digital — this prevents inrush noise from triggering spurious resets on long supply cables in appliance installations.
Keep the 4 MHz crystal or resonator traces between pins 15 (OSC2) and 16 (OSC1) short, surrounded by a grounded guard ring, and away from switching signals. SSOP-20 packages are sensitive to trace crosstalk in the 5 mm vicinity of the oscillator pins. Estimated: at 4 MHz with a 10 MHz edge rate, traces longer than 8 mm may pick up noise that shifts the internal instruction cycle by 5–10 ns.
合规信息
RoHS compliant per Microchip product page. Not AEC-Q100 qualified — automotive designs must use a qualified PIC16F variant. Halogen-free status not explicitly stated in provided data.
