PIC16LF15323-E/SL - 8-bit MCU, 3.5KB Flash, 32MHz XLP | Microchip
料号： PIC16LF15323-E/SL ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0.92 | $0.92 |
| 10 | $0.82 | $8.20 |
| 100 | $0.73 | $73.00 |
| 500 | $0.65 | $325.00 |
| 1,000 | $0.58 | $580.00 |
PIC16LF15323-E/SL 概述
What is an 8-bit PIC microcontroller? It is a microcontroller based on Microchip's 8-bit RISC architecture that combines a small instruction set, integrated Flash memory, RAM, and on-chip peripherals such as ADCs, timers, PWM modules, and communication peripherals (EUSART, SPI, I2C). Within the broader taxonomy: PIC16F/LF15323 belongs to the PIC16 family -> 8-bit PIC MCUs -> microcontrollers -> integrated circuits -> semiconductors. The 15323 sub-family is positioned as a low-power, peripheral-rich upgrade to legacy PIC16F193x devices, adding modern CIPs and richer analog while preserving instruction-set and footprint compatibility for legacy 14-pin PIC designs.
Key differentiating features include the 32 MHz internal oscillator with ±1% accuracy, four Configurable Logic Cells that let designers implement custom glue logic without external gates, and the CWG which generates complementary PWM outputs with programmable dead-band control - directly useful for half-bridge and full-bridge driver interfaces. The integrated 5-bit and 8-bit DACs provide voltage references for comparators or simple waveform generation without external components.
Typical applications for the PIC16LF15323-E/SL include IoT sensor nodes, low-power wireless remotes, LED lighting controllers, small appliances with HMI buttons, motor-control companion MCUs, and battery-powered consumer devices. The combination of small 14-pin SOIC footprint, low cost, and rich on-chip peripherals makes it a strong fit when designers want to replace discrete analog + logic circuitry with a single MCU.
When designing with this part, leverage the MPLAB X IDE and MPLAB Code Configurator (MCC) to configure CIPs graphically and avoid manual peripheral register programming. Pay attention to the 1.8V-3.6V VDD constraint - this is the LF variant; the F variant (PIC16F15323) supports up to 5.5V for 5V-system designs.
This page synthesizes distributor pricing, parametric comparisons against same-family and cross-brand drop-in alternatives, and practical design notes that are not available in the raw Microchip datasheet.
直接替换替代料： PIC16LF15323-E/SL ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC16LF15323-E/SL （相同外形与封装尺寸） ——差异在于 DAC, Package, ADC, Data SRAM, Program Memory (Flash).
快速对比工具——选择替代料号进行并排对比：
PIC16LF15323-I/SL
✅ 直接替换📋 参考替代料（不在目录中）
PIC16F15323-I/SL
✅ 直接替换✓ 有现货
$0.84 / 个
查看数据手册 →PIC16F15323-E/SL
✅ 直接替换✓ 有现货
$0.74 / 个
查看数据手册 →PIC16LF15313-I/SL
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC16LF15323-E/SL 最大额定值与电气特性
| Product Family | PIC16(L)F153xx |
| Core | 8-bit PIC enhanced mid-range RISC |
| Program Memory (Flash) | 3.5 KB (2K x 14 words) |
| Data SRAM | 256 bytes |
| Data EEPROM | 0 bytes |
| Maximum CPU Speed | 32 MHz |
| Supply Voltage (VDD) | 1.8 V to 3.6 V |
| 工作温度 | -40 C to +125 C (E = extended) |
| ADC | 10-bit, up to 11 channels |
| DAC | 5-bit and 8-bit |
| Comparators | 2 |
| PWM Channels | 4 (16-bit) |
| Configurable Logic Cells (CLC) | 4 |
| Complementary Waveform Generator (CWG) | 1 |
| Communication Peripherals | EUSART, SPI, I2C |
| Timers | 8/16-bit timer modules |
| 封装 | 14-SOIC (SL, 3.90 mm body) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
PIC16LF15323-E/SL 引脚配置
| 引脚 1 | VDD — Positive supply voltage (1.8V-3.6V) |
| 引脚 2 | RA5 — Bidirectional I/O / ADC input |
| 引脚 3 | RA4 — Bidirectional I/O / ADC input |
| 引脚 4 | RA3 — Bidirectional I/O / MCLR (reset input) |
| 引脚 5 | RA2 — Bidirectional I/O / ADC input |
| 引脚 6 | RA1 — Bidirectional I/O / ADC input / DAC output |
| 引脚 7 | RA0 — Bidirectional I/O / ADC input / DAC output |
| 引脚 8 | VSS — Ground reference |
| 引脚 9 | RA7 — Bidirectional I/O / oscillator |
| 引脚 10 | RA6 — Bidirectional I/O / oscillator |
| 引脚 11 | RC5 — Bidirectional I/O / PWM output |
| 引脚 12 | RC4 — Bidirectional I/O / PWM output |
| 引脚 13 | RC3 — Bidirectional I/O / SCL (I2C) |
| 引脚 14 | RC2 — Bidirectional I/O / SDA (I2C) |
典型应用
PIC16LF15323-E/SL 适用于 6 应用s: Battery-Powered IoT Sensor Node, LED Lighting Controller with Dimming, Small Appliance HMI with Buttons and Display, Low-Power Wireless Remote Control, BLDC Motor Companion Controller, Portable Medical Wearable Sensor.
Battery-Powered IoT Sensor Node
The PIC16LF15323-E/SL is well suited to IoT sensor nodes because its 1.8V-3.6V VDD range matches a single Li-ion or 2xAA cell, and its nanoamp-level XLP sleep modes allow duty-cycled sensing that preserves battery life for years. Its 10-bit ADC and four CLCs handle local sensor signal conditioning and digital filtering, while the integrated EUSART/SPI/I2C interfaces connect directly to sub-GHz or BLE modules. Versus larger Cortex-M0+ MCUs that require buck converters, the PIC16LF15323-E/SL eliminates the power stage and reduces BOM cost by 30-50% in low-bandwidth sensor designs.
推荐
LED Lighting Controller with Dimming
The four 16-bit PWM channels and Complementary Waveform Generator (CWG) make the PIC16LF15323-E/SL a strong fit for multi-channel LED drivers and dimming controllers. Each PWM provides 16-bit resolution for smooth logarithmic dimming curves, and the CWG adds programmable dead-band control for synchronous buck or boost LED driver topologies. The 1.8V-3.6V VDD range lets it run directly from battery or USB-derived rails without a boost converter, while the four CLCs implement over-current protection and color-mixing logic without external gates.
推荐
Small Appliance HMI with Buttons and Display
The PIC16LF15323-E/SL works well as the HMI controller in small appliances because its four CLCs implement button-debounce and rotary-encoder logic without external gates, and its 10-bit ADC reads potentiometer or NTC inputs for temperature selection. The 14-SOIC footprint fits compact appliance PCBs while the CWG drives a small buzzer or piezo for audible feedback. Versus discrete 555-based HMI designs, the MCU replaces 3-5 analog ICs and adds configurable behavior via firmware updates.
推荐
Low-Power Wireless Remote Control
Battery-powered wireless remotes benefit from the PIC16LF15323-E/SL's XLP sleep currents and instant wake-up via interrupt-on-change. The MCU stays in sleep for years between button presses, then wakes in microseconds to encode a button event over SPI or UART to a sub-GHz transmitter. Its small 14-SOIC footprint suits the tight constraints of handheld enclosures, and the integrated comparators detect low-battery conditions without external components.
推荐
BLDC Motor Companion Controller
The Complementary Waveform Generator (CWG) and four PWMs make the PIC16LF15323-E/SL a competent companion controller for small BLDC motors driving pumps or fans. It generates complementary gate-drive signals with programmable dead-band, then exchanges speed/torque commands with a host processor over EUSART. The 32 MHz core handles trapezoidal commutation at up to several kHz switching frequency, while the integrated comparators sense back-EMF for sensorless control in cost-sensitive designs.
推荐
Portable Medical Wearable Sensor
The PIC16LF15323-E/SL is a strong fit for wearable medical sensors such as pulse oximeters and single-lead ECG patches because its 1.8V minimum VDD matches coin-cell batteries and its nanoamp sleep currents extend battery life to weeks. Its 10-bit ADC with internal voltage reference reads photodiode or electrode signals, while the DAC generates bias voltages for analog front-ends. The extended -40C to +125C temperature grade supports sterilization and continuous skin-contact operation, and the 14-SOIC package is small enough for wristband form factors.
推荐
推荐产品汇总
工程参考数据： PIC16LF15323-E/SL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16LF15323-I/SL | PIC16F15323-I/SL | PIC16F15323-E/SL | PIC16LF15313-I/SL |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-SOIC (SL) | 14-SOIC (SL) | 14-SOIC (SL) | 14-SOIC (SL) | 14-SOIC (SL) |
| Program Memory (Flash) | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB |
| Data SRAM | 256 B | 256 B | 256 B | 256 B | 256 B |
| Supply Voltage (VDD) | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 1.8 V to 3.6 V |
| Temperature Grade | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C | Industrial -40C to +85C |
| Maximum CPU Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Enable Pin / MCLR | MCLR on RA3 | MCLR on RA3 | MCLR on RA3 | MCLR on RA3 | MCLR on RA3 |
关键差异点
- Lowest VDD in family supports single-cell battery designs （对比 PIC16F15323-E/SL)
- Extended temperature grade for industrial and automotive （对比 PIC16LF15323-I/SL)
- Compact 14-SOIC footprint with full peripheral set （对比 PIC16LF15313-I/SL)
设计说明
Estimated: at 32 MHz active and 3.3V VDD, the PIC16LF15323 draws approximately 1.4 mA typical. In Sleep mode with WDT disabled, current drops below 50 nA. For battery designs, configure IDLE/DOZE modes and gate peripherals off via PMD registers to maximize runtime. Always place a 100 nF decoupling capacitor within 5 mm of VDD pin 1.
Do not exceed 3.6V on the LF variant; even brief transients above 4V can damage the part. The MCLR pin (RA3) is the only true input-only pin; configuring it as output will prevent reset functionality. When migrating from F to LF variant, verify analog reference voltage (FVR buffer is 1.024V/2.048V/4.096V - the 4.096V tap is unavailable on LF at 3.3V).
The 14-SOIC package benefits from a 4-layer PCB with a continuous ground pour under the IC. Keep the 32 MHz HFINTOSC traces short and avoid routing near analog ADC inputs (RA0/RA1) to minimize digital crosstalk. The exposed copper pour under the SOIC body is non-functional (no thermal pad) but improves mechanical solder joint reliability.
合规信息
RoHS compliance per Microchip product page. AEC-Q100 automotive qualification is available separately on PIC16F15323-E/SL automotive-graded variants - LF industrial-grade parts are not AEC-Q100 qualified by default.
