PIC16LF1904-E/P - 8-Bit MCU, 7KB Flash, LCD, XLP | Microchip
料号： PIC16LF1904-E/P ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.45 | $2.45 |
| 10 | $2.21 | $22.10 |
| 100 | $1.98 | $198.00 |
| 500 | $1.76 | $880.00 |
| 1,000 | $1.55 | $1,550.00 |
PIC16LF1904-E/P 概述
A PIC (Peripheral Interface Controller) microcontroller is a compact RISC-based programmable processor optimized for embedded control. The PIC16LF1904 belongs to the mid-range PIC16 family, sitting between the smaller PIC10/PIC12 and the high-performance PIC18/PIC24. Within the power-management IC hierarchy, this part is a microcontroller (MCU), not a power converter; its nanoWatt XLP technology places it in the ultra-low-power MCU category alongside MSP430 and STM8L competitors.
Key features include a 10-bit ADC with up to 14 channels, multiple communication peripherals (I2C, SPI, EUSART), 4 x 8-bit timers plus 1 x 16-bit timer, an integrated LCD driver capable of driving segmented displays with up to 116 segments, and a wide operating temperature range of -40C to +125C. The 'LF' suffix denotes the low-voltage F-version optimized for 1.8V-3.3V operation, while 'E' indicates the extended temperature grade.
Architecturally, the PIC16LF1904 uses a 14-bit instruction word RISC core with a hardware stack, shadow register banks for fast context switching, and an internal oscillator that can be tuned in software. The integrated LCD module includes charge-pump voltage generation and configurable segment timing, eliminating the need for an external LCD bias generator.
Typical applications include battery-powered metering (gas/water/electric), portable medical devices such as glucose meters, home appliances with LCD displays, sensor node IoT edge devices, and industrial control panels. Its low sleep current also makes it suitable for energy-harvesting applications.
When designing with this MCU, place decoupling capacitors (100 nF plus 10 uF bulk) as close as possible to VDD/VSS pins. Configure the LCD charge pump for the lowest acceptable bias voltage to minimize power, and use the deep-sleep modes (doze/idle/sleep) with peripheral disable to maximize battery life.
This page synthesizes distributor pricing, drop-in PIC16 family alternatives, and practical design notes not found in the standalone Microchip datasheet.
直接替换替代料： PIC16LF1904-E/P ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC16LF1904-E/P （相同外形与封装尺寸） ——差异在于 Data RAM, Mounting Type, Package, Program Memory (Flash).
快速对比工具——选择替代料号进行并排对比：
PIC16LF1906-E/P
✅ 直接替换📋 参考替代料（不在目录中）
PIC16LF1907-E/P
✅ 直接替换📋 参考替代料（不在目录中）
PIC16LF1903-E/P
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC16LF1847-I/P
✅ 直接替换✓ 有现货
$1.85 / 个
查看数据手册 →PIC16LF1904-E/P 最大额定值与电气特性
| Core Architecture | PIC16, 8-bit RISC, 14-bit instruction word |
| Program Memory (Flash) | 7 KB (4K x 14) |
| Data RAM | 256 bytes |
| Maximum CPU Frequency | 20 MHz |
| Supply Voltage Range | 1.8 V to 3.6 V |
| 工作温度范围 | -40 C to +125 C (Extended, E suffix) |
| Timers | 4 x 8-bit, 1 x 16-bit |
| Communication Peripherals | I2C, SPI, EUSART |
| LCD Driver | Integrated, up to 116 segments |
| 封装 | 40-pin PDIP (0.600 in, 15.24 mm) |
| 安装类型 | Through-Hole |
| Low-Power Technology | nanoWatt XLP |
| MSL 等级 | 1 (unlimited) |
| RoHS 状态 | Compliant |
| Lead-Free | Yes |
PIC16LF1904-E/P 引脚配置
| 引脚 1 | RA3/AN3/VREF+ — GPIO / Analog input 3 / Voltage reference positive |
| 引脚 2 | RA4/AN4 — GPIO / Analog input 4 |
| 引脚 3 | RA5/MCLR/VPP — GPIO / Master Clear (Reset, active-low) / Programming voltage |
| 引脚 4 | RA6/OSC2/CLKOUT — GPIO / Crystal oscillator output / Clock output |
| 引脚 5 | RA7/OSC1/CLKIN — GPIO / Crystal oscillator input / External clock input |
| 引脚 6 | RC0 — GPIO port C bit 0 / LCD segment |
| 引脚 7 | RC1 — GPIO port C bit 1 / LCD segment |
| 引脚 8 | RC2 — GPIO port C bit 2 / LCD segment |
| 引脚 9 | RC3 — GPIO port C bit 3 / LCD segment |
| 引脚 10 | RC4 — GPIO port C bit 4 / LCD segment |
| 引脚 11 | RC5 — GPIO port C bit 5 / LCD segment |
| 引脚 12 | RC6 — GPIO port C bit 6 / LCD segment |
| 引脚 13 | RC7 — GPIO port C bit 7 / LCD segment |
| 引脚 14 | VDD — Positive supply voltage (1.8V to 3.6V) |
| 引脚 15 | VSS — Ground reference |
| 引脚 16 | RB0 — GPIO port B bit 0 / LCD segment |
| 引脚 17 | RB1 — GPIO port B bit 1 / LCD segment |
| 引脚 18 | RB2 — GPIO port B bit 2 / LCD segment |
| 引脚 19 | RB3 — GPIO port B bit 3 / LCD segment |
| 引脚 20 | RB4 — GPIO port B bit 4 / LCD segment |
| 引脚 21 | RB5 — GPIO port B bit 5 / LCD segment |
| 引脚 22 | RB6 — GPIO port B bit 6 / ICDCLK / LCD segment |
| 引脚 23 | RB7 — GPIO port B bit 7 / ICDDAT / LCD segment |
| 引脚 24 | RD0 — GPIO port D bit 0 / LCD segment |
| 引脚 25 | RD1 — GPIO port D bit 1 / LCD segment |
| 引脚 26 | RD2 — GPIO port D bit 2 / LCD segment |
| 引脚 27 | RD3 — GPIO port D bit 3 / LCD segment |
| 引脚 28 | RD4 — GPIO port D bit 4 / LCD segment |
| 引脚 29 | RD5 — GPIO port D bit 5 / LCD segment |
| 引脚 30 | RD6 — GPIO port D bit 6 / LCD segment |
| 引脚 31 | RD7 — GPIO port D bit 7 / LCD segment |
| 引脚 32 | RE0 — GPIO port E bit 0 / LCD segment |
| 引脚 33 | RE1 — GPIO port E bit 1 / LCD segment |
| 引脚 34 | RE2 — GPIO port E bit 2 / LCD segment |
| 引脚 35 | RE3 — GPIO port E bit 3 / LCD segment |
| 引脚 36 | RA0/AN0 — GPIO / Analog input 0 / LCD segment |
| 引脚 37 | RA1/AN1 — GPIO / Analog input 1 / LCD segment |
| 引脚 38 | RA2/AN2 — GPIO / Analog input 2 / LCD segment / VREF- |
| 引脚 39 | ICSPCLK — In-Circuit Serial Programming clock |
| 引脚 40 | ICSPDAT — In-Circuit Serial Programming data |
典型应用
PIC16LF1904-E/P 适用于 6 应用s: Battery-Powered Utility Meter, Portable Glucose Meter, Home Appliance Control Panel, Wireless Sensor Node Edge Device, Industrial Control Panel HMI, Automotive Aftermarket Accessory Display.
Battery-Powered Utility Meter
The PIC16LF1904-E/P is ideal for battery-powered gas, water, and electricity meters because its integrated segmented LCD driver supports up to 116 segments without an external bias generator, and its nanoWatt XLP technology delivers sub-microamp sleep current for 10+ year battery life. The 1.8V-3.6V supply range accepts two AA alkaline cells or a single Li-ion cell directly. Typical implementation drives an 8-digit numeric LCD via the on-chip charge pump at 3V bias, samples a sensor with the 10-bit ADC every few seconds, and wakes the CPU only to update the display or detect a button press.
推荐
Portable Glucose Meter
Portable blood-glucose meters benefit from the PIC16LF1904-E/P's integrated LCD driver for showing test results and historical trends, plus its low active current that extends battery life across thousands of test cycles. The 10-bit ADC interfaces directly with electrochemical glucose test strips via an op-amp front-end; the EUSART peripheral streams results to a Bluetooth companion IC for smartphone pairing. Sleep current below 1 uA between measurements lets a single CR2032 coin cell power the meter for 12+ months of typical use.
推荐
Home Appliance Control Panel
The PIC16LF1904-E/P fits washing machines, microwave ovens, and dishwasher control panels where a 4- to 8-digit segmented LCD shows time, status, and program selection. Its 14-channel 10-bit ADC reads multiple temperature and level sensors simultaneously, and the four 8-bit timers drive PWM outputs for relays and buzzer tones. The extended -40C to +125C temperature grade tolerates the elevated ambient near heating elements and induction drivers, while the integrated LCD charge pump eliminates the need for a separate bias inverter on the display.
推荐
Wireless Sensor Node Edge Device
IoT edge sensor nodes benefit from the PIC16LF1904-E/P's nanoWatt XLP sleep current, which keeps total system quiescent draw below the sub-microamp threshold needed for energy harvesting from indoor solar cells or thermal gradients. The MCU wakes on a sensor interrupt, performs a single ADC conversion, computes the result, transmits via SPI to a sub-GHz radio module, and returns to deep sleep. The integrated LCD can show last reading and signal strength without waking the radio.
推荐
Industrial Control Panel HMI
Industrial HMIs use the PIC16LF1904-E/P to drive segmented LCD readouts for motor speed, valve position, and alarm status. The 40-pin PDIP package is easy to hand-solder for prototyping, and the wide -40C to +125C operating range tolerates factory-floor temperatures. Multiple PWM channels control analog gauge backlights and indicator LEDs, while the EUSART connects to a PLC or industrial bus interface. The 7 KB Flash holds the HMI state machine plus diagnostic logging.
推荐
Automotive Aftermarket Accessory Display
After-market automotive accessories such as tire-pressure monitors, boost gauges, and trip computers use the PIC16LF1904-E/P to drive segmented LCDs that show real-time vehicle data. The extended -40C to +125C temperature grade covers the harsh automotive interior and engine-bay environments, and the wide 1.8V-3.6V supply accepts regulated 12V-to-3.3V rails derived from the car battery. The 10-bit ADC reads analog sensors like temperature probes and fuel-level senders directly.
推荐
推荐产品汇总
工程参考数据： PIC16LF1904-E/P ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC16LF1906-E/P | PIC16LF1907-E/P | PIC16LF1847-I/P |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin PDIP | 40-pin PDIP - same | 40-pin PDIP - same | 40-pin PDIP - same |
| Program Memory (Flash) | 7 KB | 14 KB | 28 KB | 14 KB |
| Data RAM | 256 B | 512 B | 1 KB | 1 KB |
| Supply Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 32 MHz |
| LCD Driver | Yes (up to 116 segments) | Yes (up to 116 segments) | Yes (up to 116 segments) | Yes (LCD variant) |
| Temperature Grade | -40 C to +125 C (E) | -40 C to +125 C (E) | -40 C to +125 C (E) | -40 C to +85 C (I) |
| Approx. Unit Price (1 pc, USD) | 2.45 | 2.65 | 2.95 | 2.55 |
关键差异点
- Integrated LCD driver eliminates external bias components （对比 PIC16LF1824-E/P)
- Lowest-cost entry point in PIC16LF1904/6/7 family （对比 PIC16LF1906-E/P)
- nanoWatt XLP sleep current below 1 uA （对比 PIC16LF1824-E/P)
设计说明
Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pin pair (pins 14/15) of the PIC16LF1904-E/P, plus a single 10 uF bulk capacitor on the VDD rail. Use the device's selectable brown-out reset (BOR) to force a controlled reset when battery voltage drops below the configured threshold; this prevents Flash corruption and erratic LCD behavior at end-of-life battery voltage.
Keep the LCD segment traces short and matched in length within each common/segment pair to minimize ghosting and improve contrast. Route the charge-pump flying capacitor traces (LCD-related) symmetrically and keep them away from high-frequency digital lines to prevent injection of noise into the LCD bias voltage. The ICSP pins (1/40) should be accessible via a 0.1 inch header for in-circuit programming.
Do not leave the MCLR pin floating; tie it to VDD through a 10 kohm resistor or directly drive it with the reset supervisor. When using the internal oscillator, enable the PLL only at supply voltages above 2.7V to avoid out-of-spec operation. Verify that the LCD charge-pump load capacitance matches the selected bias mode (1/2, 1/3, or 1/4) in software configuration to avoid dim or over-driven segments.
合规信息
RoHS and REACH compliance per Microchip product page; Pb-free packaging. Halogen-free status not explicitly stated in verified data. Not AEC-Q100 qualified - not intended for primary automotive safety applications.
