PIC17C43-33I/L - 8-bit OTP MCU, 33MHz, 8KB, 44-PLCC | Microchip
料号： PIC17C43-33I/L ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.2 | $112.00 |
| 100 | $9.85 | $985.00 |
| 500 | $8.45 | $4,225.00 |
| 1,000 | $7.1 | $7,100.00 |
PIC17C43-33I/L 概述
What is a PIC microcontroller: a PIC microcontroller is a programmable logic device built around a RISC Harvard architecture, where program and data memories are separated to allow simultaneous instruction fetch and data access. PIC microcontrollers sit in the broader hierarchy of microcontroller -> embedded controller -> semiconductor IC, and the PIC17C family in particular targets applications requiring higher performance and more peripherals than the PIC16C baseline, while remaining software-compatible with classic PIC instruction sets. The PIC17C43 uses one-time-programmable (OTP) EPROM for code storage.
Key features include a 16-bit-wide instruction word, hardware multiply, four counter/timer modules, a USART, and capture/compare/PWM capability, all housed in a 44-pin PLCC package measuring 16.59 x 16.59 mm. The die architecture supports a flexible interrupt controller and a watchdog timer for safety-critical control loops.
Technically, the PIC17C43 implements Microchip's enhanced PIC RISC core with 58 single-word instructions, hardware stack, and 16-level-deep hardware subroutine nesting. The 33 MHz oscillator drives the internal four-phase clock generator, yielding an instruction cycle time of 121 ns. Two 8-bit and two 16-bit timers provide flexible event timing.
Typical applications include industrial control systems, automotive subsystems, motor control firmware, and legacy embedded designs where a 5 V-tolerant 8-bit MCU with OTP code storage is preferred. The PLCC package is socket-friendly, allowing in-system firmware validation before OTP commitment. A newer recommended replacement is the PIC18F4220 (flash-based).
When designing with this part, note that OTP means each device can be programmed only once - prototype with the JW (windowed) variant for code iteration. Decoupling and oscillator layout must follow the PIC17Cxx hardware reference for EMI-sensitive environments.
This page consolidates Microchip product-page data, distributor live pricing from Mouser/LCSC, and pin-compatible alternatives not always surfaced on datasheet portals.
直接替换替代料： PIC17C43-33I/L ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC17C43-33I/L （相同外形与封装尺寸） ——差异在于 Package, Maximum Clock Frequency, Program Memory Type, Data Bus Width, Operating Temperature.
快速对比工具——选择替代料号进行并排对比：
PIC17C44-33I/L
✅ 直接替换📋 参考替代料（不在目录中）
PIC17C43-33E/L
✅ 直接替换📋 参考替代料（不在目录中）
PIC17C43-16/L
✅ 直接替换✓ 有现货
$5.1 / 个
查看数据手册 →PIC17C43-33I/L 最大额定值与电气特性
| Architecture | PIC 8-bit RISC |
| Core Size | 8-bit |
| Instruction Set | 58 single-word instructions |
| Program Memory Type | OTP EPROM |
| Program Memory Size | 8 KB (4K x 16) |
| RAM Size | 454 bytes |
| 最大时钟频率 | 33 MHz |
| CPU Performance | 8.25 MIPS |
| Instruction Cycle Time | 121 ns |
| Supply Voltage Range | 4.5 V to 6 V |
| 工作温度范围 | -40C to +85C (Industrial) |
| I/O Pins | 33 |
| Timers/Counters | 2 x 8-bit, 2 x 16-bit |
| Communication Peripherals | 1 x UART (USART) |
| 数据总线宽度 | 16-bit (instruction word) |
| 封装 | 44-PLCC (J-Lead), 16.59 x 16.59 mm |
| 安装类型 | Surface Mount |
| ROM Type | UVPROM (windowed variants available) |
| Recommended Replacement | PIC18F4220 (flash-based, per Microchip) |
PIC17C43-33I/L 44-plcc (j-lead), 16.59 x 16.59 mm 引脚配置指南
PIC17C43-33I/L（44-plcc (j-lead), 16.59 x 16.59 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： PIC17C43-33I/L.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC17C43-33I/L 适用于 6 应用s: Industrial Control Systems, Automotive Subsystems (Legacy), Motor Control and PWM Drive, Legacy Embedded Instrumentation, Consumer and Appliance Controllers, Educational and Development Boards.
Industrial Control Systems
The PIC17C43-33I/L fits industrial control systems where its 8.25 MIPS throughput and 33 MHz clock deliver deterministic real-time response for legacy PLCscan PWM motor loops. Its 4.5V-6V supply range aligns with the 5V rails common in factory PLC cabinets, while the industrial -40C to +85C rating tolerates unheated enclosures. Engineers deploy this MCU in conveyor controllers, solenoid drivers, and HMI front-ends because the 33 digital I/O lines interface directly to 5V logic without level shifters, and the OTP code memory provides tamper resistance against firmware theft. Compared to flash-based successors, the PIC17C43-33I/L's 121 ns instruction cycle time offers low interrupt latency, critical for closed-loop control loops. Trade-off: OTP forces one-time programming - prototype with the PIC17C43/JW windowed variant before committing to the production OTP parts.
推荐
Automotive Subsystems (Legacy)
The PIC17C43-33I/L is suited to legacy 12V-bodied automotive subsystems where a robust 5V, industrial-temperature 8-bit MCU suffices: dashboard controllers, body controllers, lighting sequencers, and HVAC flap actuators. The PIC17C43 provides automotive-grade EMI robustness thanks to its CMOS architecture and wide noise-margin design typical of PIC17C family parts. Although Microchip now recommends the PIC18F4220 (flash-based) for new automotive designs, the PIC17C43 remains in service fleets and aftermarket parts. With 8 KB of OTP code storage, the device can host OBD-II-style diagnostics and simple CAN-style state machines (with an external MCP2515 CAN controller). Its -40C to +85C temperature rating covers cabin and under-hood-adjacent environments, and the 44-PLCC package withstands automotive vibration profiles when properly socketed or soldered with underfill.
推荐
Motor Control and PWM Drive
Motor control firmware is a strong fit for the PIC17C43-33I/L because of its integrated capture/compare/PWM modules and four timer/counter blocks (two 8-bit, two 16-bit). The device can generate complementary PWM outputs for three-phase brushless DC motor commutation at switching frequencies well above the audible 20 kHz threshold, leveraging its 8.25 MIPS throughput to leave CPU headroom for closed-loop PI control. Industrial servo and stepper drive designs benefit from the 121 ns deterministic interrupt latency, allowing precise current-loop sampling. Engineers pair the PIC17C43 with external gate drivers and current-sense ADCs (such as the MCP3002) for low-cost variable-frequency drives. Trade-off: For new designs needing FOC (field-oriented control) or sinusoidal commutation, Microchip suggests migrating to the dsPIC33EP family for higher MIPS and DSP engine support.
推荐
Legacy Embedded Instrumentation
The PIC17C43-33I/L is widely used in legacy test & measurement and instrumentation equipment where its OTP memory locks firmware against field tampering and ensures reproducibility for compliance-tracked products. Bench-top multimeters, data loggers, process controllers, and laboratory timers can rely on the PIC17C43's hardware multiply for fast 16-bit math, 33 I/O lines for switch matrix and display driving, and the USART for legacy RS-232 communication with PCs or RS-485 networks. Industrial-grade temp rating suits the application space. Compared to modern 32-bit MCUs, the 8-bit PIC17C43 is prized in regulatory environments where its deterministic interrupt response and proven instruction set make code certification (e.g., IEC 60730) more tractable. The 8 KB code space is usually ample for menu-driven instruments with fixed measurement routines.
推荐
Consumer and Appliance Controllers
White-goods and consumer appliance controllers historically adopt the PIC17C43-33I/L for its low BOM cost, 33 I/O lines sufficient to drive LED/LCD panels and keypad matrixes, and USART for communicating with BLDC motor sub-modules. Washing machines, dishwashers, microwave ovens, and HVAC thermostats benefit from the wide 4.5V-6V supply tolerance that tolerates rectified 5V rails directly from 120V/230V mains step-down. The PIC17C43's 8 KB of OTP code can host user-interface, motor control, and sensor polling routines. Industrial temp rating supports under-dishwasher and attic-ventilator installation profiles. For new consumer designs, designers increasingly migrate to the PIC18F family (e.g., PIC18F46K22) for flash reprogrammability, but the PIC17C43 still ships in established long-life appliance platforms.
推荐
Educational and Development Boards
The PIC17C43-33I/L appears in academic microcontroller teaching curricula and development boards where students explore RISC architecture, interrupts, timers, and assembly programming. The 58 single-word instructions and 16-level hardware stack provide enough complexity to teach fundamental embedded concepts without overwhelming beginners, while remaining representative of modern RISC cores. The 33 MHz instruction rate allows real-time demonstrations of PWM, USART, and timer-driven tasks. Engineering labs benefit from the JW (windowed) variant for code iteration, the PLCC package being socket-compatible for easy reprogramming. Trade-off: Most university curricula have migrated to PIC18 or PIC32 kits; new PIC17C43-33I/L training boards are now legacy equipment but remain in service at institutions maintaining legacy curricula.
推荐
推荐产品汇总
工程参考数据： PIC17C43-33I/L ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC17C44-33I/L | PIC17C43-33E/L | PIC17C43-16/L | PIC17C43-16I/PQ | PIC17C43-25E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-PLCC (J-Lead) | 44-PLCC (J-Lead) - same | 44-PLCC (J-Lead) - same | 44-PLCC (J-Lead) - same | 44-TQFP - different footprint | 44-TQFP - different footprint |
| Maximum Clock Frequency | 33 MHz | 33 MHz | 33 MHz | 16 MHz | 16 MHz | 25 MHz |
| Program Memory (OTP) | 8 KB | 16 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| SRAM | 454 bytes | 454 bytes | 454 bytes | 454 bytes | 454 bytes | 454 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 |
| Operating Voltage | 4.5V to 6V | 4.5V to 6V | 4.5V to 6V | 4.5V to 6V | 4.5V to 6V | 4.5V to 6V |
| Temperature Range | -40C to +85C (Industrial) | -40C to +85C (Industrial) | 0C to +70C (Commercial) - downgraded | 0C to +70C (Commercial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
关键差异点
- Among PIC17C43 family members, the -33I/L part offers the highest 33 MHz clock with industrial temperature rating （对比 PIC17C43-25E/PT)
- Doubles program memory when migrating to PIC17C44-33I/L （对比 PIC17C44-33I/L)
- Industrial temperature range vs commercial-only siblings （对比 PIC17C43-33E/L)
设计说明
The PIC17C43-33I/L operates from a regulated 4.5V to 6V supply and draws a typical active current that scales with clock frequency and enabled peripherals. Place a 100 nF ceramic decoupling capacitor within 5 mm of the VDD pin, plus a 10 uF bulk tantalum or ceramic capacitor on the same rail to suppress switching transients from on-chip peripherals. The PIC17C43 is sensitive to VDD brownout; add an external supervisor such as MCP120 or MCP130 with a reset threshold around 4.0 V if the supply is battery-fed or has slow rise time. Avoid back-driving the MCLR pin to ensure clean reset behavior; use a 10 kohm pull-up to VDD per the datasheet hardware reference. Estimated: with 33 MHz clock and all peripherals active, typical IDD is in the 25 mA range - verify with your specific application profile.
The 44-PLCC package has a junction-to-ambient thermal resistance (theta_JA) typically around 50 C/W for still-air conditions. In a sealed industrial enclosure with +60C ambient, ensure the device's junction temperature stays within the -40C to +85C operating range. The PIC17C43-33I/L dissipates modest power at 5V (Estimated: 5V x 25 mA = 125 mW), so thermal management is rarely critical, but if the part is embedded near a power-MOSFET heatsink, verify the local ambient vs datasheet thermal derating curves.
Layout the 44-PLCC land pattern with through-hole or surface-mount pads per IPC-7351 nominal-density profile, and keep the oscillator traces as short as possible to minimize stray capacitance. Use a ground plane on the inner PCB layer directly beneath the IC to reduce EMI, and place the decoupling capacitors on the same side as the device. For production programming of OTP variants, route the PGM pin and ICSPDAT/ICSPCLK interface to a test pad or programming header for in-circuit programming. Avoid running high-frequency digital traces under the package to prevent capacitive coupling into the oscillator pins (OSC1/OSC2).
Common pitfalls with the PIC17C43-33I/L include: (1) confusing the L (44-PLCC) and PQ (44-TQFP) package suffixes - they are NOT drop-in compatible on the same footprint; (2) mixing the I (-40C to +85C) and standard commercial temp grades in production; (3) programming the OTP variant in-circuit without provision for VPP high-voltage lockout, which can prevent reprogramming; (4) exceeding 33 MHz clock frequency on the rated part - the PIC17C43-25E/PT variant supports only up to 25 MHz. Always verify the exact ordering code against the Microchip datasheet family document 30262b before committing to volume orders.
合规信息
Compliance status not found in the verified web data provided. PIC17C43 family is a mature legacy product from Microchip Technology; AEC-Q100 automotive qualification status is unclear. RoHS status marked [DATA_NEEDED] in specs because explicit compliance documentation was not present in the search results.
