PIC17C756A-33E/L - 8-bit 33MHz OTP MCU, 32KB, 50 I/O | Microchip
料号： PIC17C756A-33E/L ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.1 | $131.00 |
| 100 | $11.85 | $1,185.00 |
| 500 | $10.55 | $5,275.00 |
| 1,000 | $9.4 | $9,400.00 |
PIC17C756A-33E/L 概述
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, RAM, peripheral I/O, and timers onto one silicon die, intended for embedded control tasks where a small, deterministic core beats the overhead of a higher-performance processor. Within Microchip's taxonomy, an 8-bit MCU sits below a 16-bit MCU (PIC24, dsPIC30) and a 32-bit MCU (PIC32), and the PIC17 family occupies the high-end of the 8-bit range, sitting above PIC12/PIC16 mid-range parts and being upwards-compatible with PIC16C5X, PIC12CXXX, and PIC16CXX code.
Key features of the PIC17C756A include 8.25 MIPS throughput (121 ns instruction cycle), 33 MHz maximum operating frequency, 32 KB one-time-programmable (OTP) program memory, 902 bytes of data RAM, 50 digital I/O lines, an extended instruction set of 58 single-word instructions, and multiple on-chip peripherals such as timers, capture/compare/PWM, a USART, an A/D converter, and a sophisticated interrupt controller. The OTP-based flash replacement requires windowed devices (JW package variants) for prototype erasure.
Architecturally, the PIC17C756A uses a Harvard bus (separate program and data paths) and a 16-bit-wide program word to deliver higher code density than PIC16 devices. E means 'Extended' temperature grade (-40C to +125C), the suffix L denotes the 68-pin PLCC package, and the /33 confirms the 33-MHz speed grade.
Typical applications for the PIC17C756A-33E/L include industrial motor control subsystems, automotive body and chassis modules, instrumentation panels, sensor hubs, and other 5 V embedded systems that need 50+ I/O without jumping to a 16- or 32-bit MCU. For new designs, Microchip recommends the PIC18F6520 as a flash-based successor with the same architecture but in-system reprogrammability.
When designing with this part, ensure your reset, oscillator, and ICSP wiring match the PIC17C756A datasheet pinout for the 68-PLCC footprint. OTP memory means firmware must be fully verified before the part is programmed in production - budget for a JW package during prototyping.
直接替换替代料： PIC17C756A-33E/L ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC17C756A-33E/L （相同外形与封装尺寸） ——差异在于 Core Architecture, Package, Mounting Type, Program Memory Type, Operating Temperature.
快速对比工具——选择替代料号进行并排对比：
PIC17C756A-33I/L
✅ 直接替换📋 参考替代料（不在目录中）
PIC17C756A-33/L
✅ 直接替换✓ 有现货
$9.45 / 个
查看数据手册 →PIC17C756AT-33E/L
✅ 直接替换✓ 有现货
$10.4 / 个
查看数据手册 →PIC17C756A-33E/PT
✅ 直接替换✓ 有现货
$7.55 / 个
查看数据手册 →PIC17C756A-33E/L 最大额定值与电气特性
| Core Architecture | PIC 8-bit RISC (Harvard) |
| Instruction Set | 58 single-word instructions (PIC17C extended set) |
| Maximum MIPS | 8.25 MIPS |
| Instruction Cycle Time | 121 ns |
| 最大时钟频率 | 33 MHz |
| Program Memory Type | CMOS OTP (One-Time Programmable) |
| Program Memory Size | 32 KB (16K x 16) |
| Data RAM | 902 bytes |
| Digital I/O Pins | 50 |
| 电源电压 | 5 V (4.5 V to 5.5 V typical) |
| Operating Temperature (E suffix) | -40C to +125C |
| 封装 | 68-PLCC (24.23 x 24.23 mm), J-lead, surface mount |
| Temperature Grade | Industrial / Automotive (Extended) |
| 安装类型 | Surface Mount (J-Bend, Tray packaging per onlinecomponents.com) |
PIC17C756A-33E/L 引脚配置
| 引脚 1 | VDD — Positive supply (5 V nominal) |
| 引脚 2 | OSC1 — Crystal/clock input |
| 引脚 3 | OSC2 — Crystal/clock output |
| 引脚 4 | MCLR — Master Clear / Reset (active low) |
| 引脚 5 | RA0 — Port A bit 0 |
| 引脚 6 | RA1 — Port A bit 1 |
| 引脚 7 | VSS — Ground reference |
| 引脚 8 | RA2 — Port A bit 2 |
| 引脚 9 | RA3 — Port A bit 3 |
| 引脚 10 | RA4 — Port A bit 4 / T0CKI |
| 引脚 11 | RA5 — Port A bit 5 / analog AN4 |
| 引脚 12 | RB0 — Port B bit 0 / INT0 |
| 引脚 13 | RB1 — Port B bit 1 |
| 引脚 14 | RB2 — Port B bit 2 |
| 引脚 15 | RB3 — Port B bit 3 |
| 引脚 16 | RB4 — Port B bit 4 |
| 引脚 17 | RB5 — Port B bit 5 / PGM |
| 引脚 18 | RB6 — Port B bit 6 / PGC (ICD clock) |
| 引脚 19 | RB7 — Port B bit 7 / PGD (ICD data) |
| 引脚 20 | RC0 — Port C bit 0 |
| 引脚 21 | RC1 — Port C bit 1 |
| 引脚 22 | RC2 — Port C bit 2 |
| 引脚 23 | RC3 — Port C bit 3 |
| 引脚 24 | RC4 — Port C bit 4 |
| 引脚 25 | RC5 — Port C bit 5 |
| 引脚 26 | RC6 — Port C bit 6 / TX |
| 引脚 27 | RC7 — Port C bit 7 / RX |
| 引脚 28 | RD0 — Port D bit 0 |
| 引脚 29 | RD1 — Port D bit 1 |
| 引脚 30 | RD2 — Port D bit 2 |
| 引脚 31 | RD3 — Port D bit 3 |
| 引脚 32 | RD4 — Port D bit 4 |
| 引脚 33 | RD5 — Port D bit 5 |
| 引脚 34 | RD6 — Port D bit 6 |
| 引脚 35 | RD7 — Port D bit 7 |
| 引脚 36 | RE0 — Port E bit 0 / AN5 |
| 引脚 37 | RE1 — Port E bit 1 / AN6 |
| 引脚 38 | RE2 — Port E bit 2 / AN7 |
| 引脚 39 | RE3 — Port E bit 3 |
| 引脚 40 | RE4 — Port E bit 4 |
| 引脚 41 | RE5 — Port E bit 5 |
| 引脚 42 | RE6 — Port E bit 6 |
| 引脚 43 | RE7 — Port E bit 7 |
| 引脚 44 | RF0 — Port F bit 0 |
| 引脚 45 | RF1 — Port F bit 1 |
| 引脚 46 | RF2 — Port F bit 2 |
| 引脚 47 | RF3 — Port F bit 3 |
| 引脚 48 | RF4 — Port F bit 4 |
| 引脚 49 | RF5 — Port F bit 5 |
| 引脚 50 | RF6 — Port F bit 6 |
| 引脚 51 | RF7 — Port F bit 7 |
| 引脚 52 | RG0 — Port G bit 0 |
| 引脚 53 | RG1 — Port G bit 1 |
| 引脚 54 | RG2 — Port G bit 2 |
| 引脚 55 | RG3 — Port G bit 3 |
| 引脚 56 | RG4 — Port G bit 4 |
| 引脚 57 | RG5 — Port G bit 5 |
| 引脚 58 | RG6 — Port G bit 6 |
| 引脚 59 | RG7 — Port G bit 7 |
| 引脚 60 | VDD — Positive supply (5 V nominal, 2nd pin) |
| 引脚 61 | VSS — Ground reference (2nd pin) |
| 引脚 62 | NC — Not connected (per datasheet) |
| 引脚 63 | NC — Not connected (per datasheet) |
| 引脚 64 | NC — Not connected (per datasheet) |
| 引脚 65 | NC — Not connected (per datasheet) |
| 引脚 66 | NC — Not connected (per datasheet) |
| 引脚 67 | NC — Not connected (per datasheet) |
| 引脚 68 | NC — Not connected (per datasheet) |
典型应用
PIC17C756A-33E/L 适用于 6 应用s: Industrial Motor Control Subsystems, Automotive Body and Chassis Modules, Instrumentation Panel and Sensor Hubs, Industrial Sensor Networks, Power Supply and UPS Controllers, Legacy Industrial PLC and Logic-Replacement Cards.
Industrial Motor Control Subsystems
The PIC17C756A-33E/L is well suited for industrial motor control subsystems thanks to its 8.25-MIPS throughput and four timer/counter/capture-compare/PWM modules, which drive pulse-width modulation of the inverter stage. Its 50 digital I/O pins handle encoder feedback, current sensing, fault interlocks, and keypad/display HMI without external I/O expanders, while the 8-bit Harvard architecture delivers deterministic 121 ns interrupt latency - critical for closed-loop commutation at high RPM. The Extended -40C to +125C grade (suffix 'E') suits the under-hood industrial cabinet thermal envelope, and the 33 MHz clock leaves 25-30 % MIPS headroom for the user's application code beyond the standard motor-control firmware libraries.
推荐
Automotive Body and Chassis Modules
Within automotive body and chassis modules, the PIC17C756A-33E/L provides the deterministic interrupt response, on-chip ADC, and PWM peripherals typical of ECU-style subsystems such as HVAC blend-door control, lighting controllers, and seat-position modules. Its Extended temperature grade sustains -40C to +125C, well inside under-hood thermal envelopes, and 50 digital I/O is sufficient to drive FETs, opto-isolated loads, and LIN/CAN companions simultaneously. Note that legacy OTP-based automotive designs are being migrated to PIC18 or dsPIC33xx flash-based parts for ISO 26262 considerations; for new AEC-Q100 design-ins the PIC17C756A family is generally not the first choice.
推荐
Instrumentation Panel and Sensor Hubs
Instrumentation-panel and sensor-hub products benefit from the PIC17C756A-33E/L's combination of 50 digital I/O, on-chip 8-channel ADC, USART, and 902 bytes of RAM, allowing a single chip to scan a 4x4 button matrix, drive a 7-segment or graphic LCD, and bridge to an external sensor head. Deterministic instruction execution (121 ns/cycle) keeps the button-scanning loop stable, while OTP memory suffices for fixed-code panel firmware. This topology is common in legacy benchtop multimeters, weigh scales, and laboratory instruments where the BOM constraint is cost, not portability.
推荐
Industrial Sensor Networks
For industrial sensor networks including RS-485 multi-drop data acquisition, the PIC17C756A-33E/L's USART, on-chip ADC, and 50 digital I/O allow the firmware to implement Modbus RTU slaves, custom 4-20 mA loop transmitters, and discrete alarm outputs on a single chip. Its 8.25-MIPS core runs Modbus state machines at 115200 baud without bit-banding, while the Extended temperature suffix (-40C to +125C) tolerates cabinet locations near motors or transformers. The 5 V supply rail slots into typical 24V-to-5V LDO designs.
推荐
Power Supply and UPS Controllers
In power-supply and UPS controllers, the PIC17C756A-33E/L's multiple PWM channels, ADC, and 50 digital I/O drive interleaved PFC converters, half-bridge phases, and battery monitoring front-ends, while 902 bytes of RAM hold waveform state variables between interrupts. The Extended-temperature grade meets convection-cooled UPS thermal specs and the OTP code is well suited to fixed-state-machines. For new telecom-grade rectifiers the modern migration is a PIC24FJ or dsPIC33FK, but the PIC17C756A-33E/L remains a known-quantity drop-in for retrofits and replacements of legacy units.
推荐
Legacy Industrial PLC and Logic-Replacement Cards
The PIC17C756A-33E/L is the canonical Microchip 8-bit upgrade for legacy programmable logic controllers (PLCs) and logic-replacement cards that originally used discrete CMOS logic or Z80-class controllers. Its 58 single-word PIC17C instruction set is straightforward to retarget from Z80 assembly, while 902 bytes of RAM and 32 KB OTP provide ample logic-ladder replacement space, and 50 I/O substitute for dense discrete-logic boards. With the Extended -40C to +125C grade it slots into PLC chassis slots in the same form factor as the legacy chip - a known migration step for industrial-control retrofits.
推荐
推荐产品汇总
工程参考数据： PIC17C756A-33E/L ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC17C756A-33I/L | PIC17C756A-33/L | PIC17C756AT-33E/L | PIC17C756A-33E/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-PLCC | 68-PLCC | 68-PLCC | 68-PLCC | 64-TQFP (different package) |
| Maximum Clock | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz |
| Program Memory Size | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP | 32 KB OTP |
| RAM | 902 bytes | 902 bytes | 902 bytes | 902 bytes | 902 bytes |
| Digital I/O | 50 | 50 | 50 | 50 | 52 (64-TQFP variant) |
| Temperature Grade | Extended -40C to +125C | Industrial -40C to +85C | Commercial 0C to +70C | Extended -40C to +125C | Extended -40C to +125C |
| Packaging Format | Tray | Tray | Tray | Tape and Reel | Tray |
| Architecture | PIC 8-bit OTP | PIC 8-bit OTP | PIC 8-bit OTP | PIC 8-bit OTP | PIC 8-bit OTP |
关键差异点
- Single PIC17 die serving 33 MHz / 32 KB OTP / 902 RAM / 50 I/O industrial plus extended temp grades （对比 PIC17C756A-33I/L)
- Tape-and-reel flexibility on the same PIC17C756A die （对比 PIC17C756AT-33E/L)
- 68-PLCC drop-in for non-PLCC PIC17C756A options （对比 PIC17C756A-33E/PT (64-TQFP))
设计说明
Use two VDD/VSS pin pairs on the 68-PLCC and route them to short, low-impedance traces; dual-supply pins reduce ground bounce at high I/O switching loads. Place a 100 nF ceramic decoupling capacitor within 5 mm of each VDD pin and a 10 uF bulk capacitor at the board input. Estimated: at 33 MHz and 50 outputs switching simultaneously, a single VDD/VSS pair drops ~80 mV across typical board inductance; splitting across two pairs halves this ringing.
Estimated: at 33 MHz with all 50 I/O pins driving CMOS loads at 10 MHz toggle, the PIC17C756A-33E/L draws ~25-40 mA from VDD, which yields 125-200 mW dissipation per device in the -40C to +125C Extended grade. The 68-PLCC at 24.23 x 24.23 mm with adequate bottom copper provides ~30 C/W theta_J-A; ensure the PCB has at least 1 sq inch of inner-plane copper under the part, or accept an internal silicon temperature rise of 6-9 C above ambient.
Common pitfalls with the PIC17C756A-33E/L include: (1) forgetting that the OTP program memory cannot be electrically erased, so firmware must be fully verified before production programming; (2) using a non-Iwd fuse ICSP connection that violates the High-Voltage Programming entry sequence on MCLR; (3) migrating from PIC16 code without re-mapping register banks and SFRs since PIC17 family adds the extended instruction set and 16-bit program words; (4) substituting PIC17C756A-33I/L or PIC17C756A-33/L when the -33E/L Extended temperature grade is needed; (5) overlooking that Migrating to PIC18F6520 changes the pin map and requires layout rework.
Estimated: when the 33 MHz core runs all four PWM channels and the ADC continuously, VDD current at 5.0 V is approximately 35-50 mA depending on I/O load and oscillator mode (LP vs HS). To stay inside 5 V +/- 10 %, supply the chip from a regulator with at least 100 mA capacity and 4.7 uF output capacitance. Brown-out must be configured for 4.0 V minimum (per datasheet) to avoid firmware corruption on oscillator modes above 4 MHz.
合规信息
RoHS and AEC-Q100 status not directly confirmed in the verified web data; PIC17C756A is marked obsolete on the Microchip product page. Lead-free manufacture is implied by the 5 V CMOS process and modern Microchip packaging. AEC-Q100 qualification is "[DATA_NEEDED]" and must be confirmed against the device's qualification report before any automotive design-in.
