PIC18F46K22-E/MV - 8-Bit 64KB Flash MCU, 40-UQFN | Microchip
料号： PIC18F46K22-E/MV ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4.32 | $4.32 |
| 10 | $3.89 | $38.90 |
| 100 | $3.45 | $345.00 |
| 500 | $3.05 | $1,525.00 |
| 1,000 | $2.72 | $2,720.00 |
PIC18F46K22-E/MV 概述
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path CPU with on-chip Flash program memory, SRAM data memory, and a rich set of peripherals (ADC, timers, PWM, communication interfaces). It sits in the broader taxonomy of microcontroller -> embedded processor -> semiconductor. PIC18-family MCUs use a RISC modified-Harvard architecture optimized for C-compiler code density and deterministic interrupt response, making them workhorses in cost-sensitive industrial and consumer products.
Key features include operation across 2.5V/3.3V/5V supplies (4.2V-5.5V VDD per the verified data), a 12-bit A/D converter with up to 30 channels, multiple Enhanced CCP/PWM peripherals, MSSP (SPI/I2C), EUSART, and nanoWatt XLP sleep currents down to the nanoampere range. The E temperature suffix denotes the extended -40C to +125C operating range suitable for industrial and harsh-environment applications.
The PIC18F46K22 architecture uses a 16-bit instruction word with 8-bit data, supports up to 16 MIPS throughput, and provides linear program memory addressing up to 64 KB and linear data memory up to 4 KB. The 40-UQFN (MV) 5x5 mm footprint with exposed thermal pad is suitable for space-constrained PCB designs requiring a low profile and good thermal dissipation.
Typical applications include industrial control boards, sensor signal conditioning nodes, low-power battery-powered IoT edge devices, HVAC controllers, automotive body and accessory subsystems, and home appliances. The combination of XLP low power, 12-bit ADC, and rich PWM/peripheral set fits motor control and mixed-signal sensing roles.
Design consideration: ensure decoupling with 100 nF and bulk capacitors placed close to AVDD/VDD pins; the exposed thermal pad on the MV package must be soldered to a copper land for mechanical reliability and thermal performance. Plan firmware around the device's vectored interrupt structure and avoid tight loops in XLP sleep mode if peripheral wake events are required.
This page synthesizes current distributor pricing, same-brand and cross-brand drop-in alternatives, and engineering design notes that go beyond the manufacturer datasheet summary, supporting both manual selection and AI-driven comparison.
直接替换替代料： PIC18F46K22-E/MV ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC18F46K22-E/MV （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Timers, ADC, Program Memory (Flash).
快速对比工具——选择替代料号进行并排对比：
PIC18F46K22-I/MV
✅ 直接替换✓ 有现货
$2.1 / 个
查看数据手册 →PIC18F45K22-E/MV
✅ 直接替换✓ 有现货
$2.84 / 个
查看数据手册 →PIC18F44K22-E/MV
✅ 直接替换📋 参考替代料（不在目录中）
PIC18F46K22T-I/MV
✅ 直接替换📋 参考替代料（不在目录中）
PIC18F43K22-E/MV
✅ 直接替换📋 参考替代料（不在目录中）
PIC18F46K22-E/MV 最大额定值与电气特性
| Core Architecture | PIC18 8-bit RISC |
| Program Memory (Flash) | 64 KB (32K x 16) |
| Data Memory (SRAM) | 3,968 bytes |
| EEPROM | 1,024 bytes |
| Maximum CPU Speed | 48 MHz (16 MIPS) |
| Supply Voltage (VDD) | 2.5V / 3.3V / 5V (4.2V to 5.5V operating range per data) |
| 工作温度 | -40C to +125C (Extended, E suffix) |
| I/O Pins | 36 |
| 封装 | 40-pin UQFN (MV) 5x5 mm with exposed pad |
| ADC | 12-bit, up to 30 channels |
| PWM / ECCP | Multiple ECCP/CCP modules |
| Communication Interfaces | MSSP (SPI/I2C), EUSART |
| Low-Power Technology | nanoWatt XLP |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
PIC18F46K22-E/MV 引脚配置
| 引脚 1 | RA0/AN0/C1IN0-/ULPWU — Port A bit 0 / analog input 0 / comparator input |
| 引脚 2 | RA1/AN1/C2IN0-/HLVDIN — Port A bit 1 / analog input 1 / HLVD input |
| 引脚 3 | RA2/AN2/VREF-/CVREF — Port A bit 2 / analog input 2 / DAC reference |
| 引脚 4 | RA3/AN3/VREF+ — Port A bit 3 / analog input 3 / positive reference |
| 引脚 5 | RA4/T0CKI/C1OUT — Port A bit 4 / Timer0 clock / comparator output |
| 引脚 6 | RA5/AN4/C2OUT — Port A bit 5 / analog input 4 / comparator output |
| 引脚 7 | RA6/OSC2/CLKO — Port A bit 6 / oscillator output |
| 引脚 8 | RA7/OSC1/CLKI — Port A bit 7 / oscillator input |
| 引脚 9 | RE0/RD/AN5 — Port E bit 0 / parallel port read |
| 引脚 10 | RE1/WR/AN6 — Port E bit 1 / parallel port write |
| 引脚 11 | RE2/CS/AN7 — Port E bit 2 / parallel port chip select |
| 引脚 12 | RE3/P3A/MCLR/VPP — Port E bit 3 / master clear / programming voltage |
| 引脚 13 | VDD — Positive supply voltage |
| 引脚 14 | VSS — Ground reference |
| 引脚 15 | RB0/INT0/FLT0/AN12 — Port B bit 0 / external interrupt 0 |
| 引脚 16 | RB1/INT1/AN10 — Port B bit 1 / external interrupt 1 |
| 引脚 17 | RB2/INT2/CTPLS/AN8 — Port B bit 2 / external interrupt 2 |
| 引脚 18 | RB3/CTED1/AN9/CCP2 — Port B bit 3 / CCP2 output |
| 引脚 19 | RB4/IOC0/AN11 — Port B bit 4 / interrupt-on-change |
| 引脚 20 | RB5/IOC1/CCP3 — Port B bit 5 / CCP3 output |
| 引脚 21 | RB6/IOC2/PGC — Port B bit 6 / ICSP clock |
| 引脚 22 | RB7/IOC3/PGD — Port B bit 7 / ICSP data |
| 引脚 23 | RC0/SOSCO — Port C bit 0 / secondary oscillator output |
| 引脚 24 | RC1/SOSCI — Port C bit 1 / secondary oscillator input |
| 引脚 25 | RC2/CCP1/P1A/AN13 — Port C bit 2 / CCP1 output |
| 引脚 26 | RC3/SCL1/SCK1 — Port C bit 3 / I2C clock / SPI clock |
| 引脚 27 | RC4/SDA1/SDI1 — Port C bit 4 / I2C data / SPI data in |
| 引脚 28 | RC5/SDO1 — Port C bit 5 / SPI data out |
| 引脚 29 | RC6/CK1/TX1/CK2 — Port C bit 6 / UART clock/transmit |
| 引脚 30 | RC7/RX1/DT1 — Port C bit 7 / UART receive |
| 引脚 31 | RD0/C1INA/AN22 — Port D bit 0 |
| 引脚 32 | RD1/CCP4/AN23 — Port D bit 1 / CCP4 output |
| 引脚 33 | RD2/C2INA/AN24 — Port D bit 2 |
| 引脚 34 | RD3/C3INA/AN25 — Port D bit 3 |
| 引脚 35 | RD4/CCP5/AN26 — Port D bit 4 / CCP5 output |
| 引脚 36 | RD5/CCP6/AN27 — Port D bit 5 / CCP6 output |
| 引脚 37 | RD6/ECCP1/P1B/AN28 — Port D bit 6 / enhanced CCP |
| 引脚 38 | RD7/ECCP2/P2A/AN29 — Port D bit 7 / enhanced CCP |
| 引脚 39 | AVDD — Analog positive supply |
| 引脚 40 | AVSS — Analog ground reference |
典型应用
PIC18F46K22-E/MV 适用于 6 应用s: Industrial Control & Sensor Interface Boards, Low-Power IoT Edge Sensor Nodes, HVAC and Building Automation Controllers, Automotive Body and Accessory Modules, Home Appliance Control Boards, User Interface and Display Driver Boards.
Industrial Control & Sensor Interface Boards
The PIC18F46K22-E/MV fits industrial control boards thanks to its 12-bit ADC with up to 30 channels for multi-signal conditioning, 36 digital I/O lines for actuator and switch interfacing, and Extended -40C to +125C temperature rating. Its 48 MHz / 16 MIPS core executes closed-loop PID at the millisecond scale typical of process-control update rates. Place it on a 40-UQFN (MV) 5x5 mm footprint with the exposed pad soldered for thermal reliability in enclosed cabinets; nanoWatt XLP sleep modes reduce quiescent draw between sensor scans for always-on industrial nodes.
推荐
Low-Power IoT Edge Sensor Nodes
The PIC18F46K22-E/MV is well-suited to battery-powered IoT sensor endpoints thanks to nanoWatt XLP technology with sleep currents in the nanoampere range, enabling multi-year battery life when waking periodically to read sensors. Its MSSP (SPI/I2C) peripheral drives digital sensors and the EUSART interfaces to sub-GHz radios or BLE modules. The 40-UQFN 5x5 mm footprint enables compact sensor PCBs, and 64 KB Flash accommodates OTA bootloader + application firmware stacks. The 12-bit ADC with sleep-mode conversion supports low-duty-cycle battery telemetry on 3.3V coin-cell rails.
推荐
HVAC and Building Automation Controllers
The PIC18F46K22-E/MV drives HVAC and building-automation subsystems where Extended temperature grade, multiple PWM channels, and 12-bit ADC precision are mandatory for valve and damper control loops. Its nanoWatt XLP modes cut standby power in wall thermostats and fan-coil controllers between user interactions. The 64 KB Flash hosts BACnet/Modbus stack plus application logic, and the 40-UQFN (MV) 5x5 mm profile fits slim-line wall-mount enclosures. 36 GPIO handle keypads, relays, and triac-fired AC loads when paired with zero-cross optocouplers.
推荐
Automotive Body and Accessory Modules
The PIC18F46K22-E/MV suits non-safety automotive body modules - lighting controllers, seat controllers, HVAC blend-door actuators, and accessory multiplex nodes - where Extended -40C to +125C operation and PWM/ECCP peripherals are required. Its 12-bit ADC monitors current-sense shunts and thermistor inputs for actuator feedback. Note: this part is not AEC-Q100 qualified; for AEC-Q100 safety-relevant modules choose PIC18F46K22-E/MV with explicit automotive part number or migrate to AEC-Q100-qualified PIC18F Q-series. The 40-UQFN (MV) 5x5 mm enables small ECU sub-modules.
推荐
Home Appliance Control Boards
The PIC18F46K22-E/MV integrates well into white-goods control boards (washing machines, dishwashers, refrigerators, microwave ovens) where its 48 MHz core drives multi-axis motor control via ECCP/PWM, 12-bit ADC reads temperature and level sensors, and Extended temperature rating survives appliance environments. 64 KB Flash hosts state-machine control firmware plus UI drivers for 7-segment or LCD interfaces. The 40-UQFN 5x5 mm footprint allows placement near motor drivers on the same board, and nanoWatt XLP keeps standby power low for Energy Star compliance.
推荐
User Interface and Display Driver Boards
The PIC18F46K22-E/MV serves as a UI controller for vending machines, point-of-sale terminals, and instrument panels where 36 GPIO handle keypads, 7-segment or character LCDs, status LEDs, and rotary encoders. Its 64 KB Flash supports graphical menu structures and EEPROM stores user settings. MSSP (SPI) drives LED drivers or small TFT panels via serial interface. The 40-UQFN 5x5 mm footprint suits slim UI PCBs, and nanoWatt XLP idle mode saves power when the user interface is dormant between touches.
推荐
推荐产品汇总
工程参考数据： PIC18F46K22-E/MV ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC18F46K22-I/MV | PIC18F45K22-E/MV | PIC18F44K22-E/MV | PIC18F43K22-E/MV |
|---|---|---|---|---|---|
| Package | 40-pin UQFN (MV) 5x5 mm | 40-pin UQFN (MV) 5x5 mm - same | 40-pin UQFN (MV) 5x5 mm - same | 40-pin UQFN (MV) 5x5 mm - same | 40-pin UQFN (MV) 5x5 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 64 KB | 64 KB | 32 KB | 16 KB | 8 KB |
| SRAM | 3,968 bytes | 3,968 bytes | 3,968 bytes | 3,968 bytes | 1,536 bytes |
| EEPROM | 1,024 bytes | 1,024 bytes | 1,024 bytes | 1,024 bytes | 256 bytes |
| Operating Temperature | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +125C (Extended) | -40C to +125C (Extended) |
| Max CPU Speed | 48 MHz / 16 MIPS | 48 MHz / 16 MIPS | 48 MHz / 16 MIPS | 48 MHz / 16 MIPS | 48 MHz / 16 MIPS |
| 12-bit ADC Channels | Up to 30 | Up to 30 | Up to 30 | Up to 28 | Up to 28 |
| Supply Voltage | 2.5V / 3.3V / 5V | 2.5V / 3.3V / 5V | 2.5V / 3.3V / 5V | 2.5V / 3.3V / 5V | 2.5V / 3.3V / 5V |
关键差异点
- Extended -40C to +125C operating temperature with nanoWatt XLP extreme low power （对比 PIC18F46K22-I/MV)
- Maximum Flash density in the 40-UQFN K22 family （对比 PIC18F45K22-E/MV)
- Highest 12-bit ADC channel count in the 40-UQFN K22 family （对比 PIC18F44K22-E/MV)
设计说明
The 40-UQFN (MV) package uses an exposed thermal pad on the underside that MUST be soldered to a copper land on the PCB, per Microchip package guidelines. A land area of at least 25 mm^2 (a 5x5 mm pad) provides primary heat spreading; for higher-power designs, stitch vias to an inner ground plane enlarge the thermal mass. Skipping the exposed-pad solder connection can lead to intermittent operation under thermal stress, especially at +125C ambient operation.
Decouple VDD and AVDD each with a 100 nF ceramic capacitor placed within 3 mm of the respective pins, plus a bulk 4.7 uF to 10 uF tantalum or ceramic on each rail. The PIC18F46K22-E/MV is sensitive to VDD ripple during ADC conversions; route AVDD separately and tie AVDD to VDD through a ferrite bead if analog precision is required. nanoWatt XLP modes require careful sequencing of peripheral disable bits before sleep entry to reach the lowest nanoampere standby currents quoted in the datasheet.
Route the ICSP clock (PGC, RB6) and data (PGD, RB7) lines as short as possible and avoid routing them near switching signals or analog inputs to prevent programming-noise coupling during in-circuit serial programming. The 40-UQFN (MV) 5x5 mm land pattern requires NSMD (non-solder mask defined) pads with 0.25 mm pitch - follow IPC-7351 land-pattern guidelines for QFN packages to ensure reliable solder joints and avoid tombstoning during reflow.
Configuration word settings must be set BEFORE the first instruction executes - an unconfigured MCLR/VPP pin defaults to MCLR mode, which can prevent normal startup if the ICSP programmer is not connected. The PIC18F46K22-E/MV is the Extended temperature grade; if your firmware was developed on an -I/MV industrial-grade part, you must verify timing and EEPROM endurance across the wider -40C to +125C range. Brown-out reset (BOR) and watchdog timer (WDT) must be enabled for unattended industrial deployments to recover from power glitches.
合规信息
RoHS and lead-free compliant per Microchip product page. NOT AEC-Q100 qualified - for automotive safety-relevant modules choose an AEC-Q100-qualified part from the PIC18F Q-series or PIC18F K-series with explicit automotive part number.
