PIC18F6680-I/L - 64KB 8-Bit 40MHz Microcontroller | Microchip
料号: PIC18F6680-I/L ✗ 停产PIC18F6680-I/L 概述
An 8-bit microcontroller is a compact embedded-processing component that combines a CPU core, program Flash, data memory, and peripherals such as communications and I/O in one device. Within the embedded-control hierarchy, the PIC18F6680-I/L is a PIC18-family microcontroller, a RISC-based MCU, and a system-on-chip for industrial control, communications, and instrumentation equipment. Its 40 MHz operating speed provides substantially more processing headroom than legacy 8-bit designs while retaining a simple peripheral and development ecosystem.
Key features include 64 KB of enhanced Flash for firmware, 3,328 bytes of RAM for working variables, and 1,024 bytes of EEPROM for nonvolatile configuration data. The device provides 52 I/O pins and a 5 V supply arrangement. Its 8-bit RISC instruction set, integrated Flash memory, and extensive peripheral set support embedded designs that require deterministic control, serial communications, data acquisition, and externally connected sensors. The PLCC package also provides a leaded surface-mount format with a relatively forgiving assembly process.
The PIC18F6680 belongs to the PIC18F6X8X device family, which includes related PIC18F6585, PIC18F8585, and PIC18F8680 devices. The family's enhanced Flash architecture supports in-circuit programming and firmware maintenance, while the PLCC option is useful when a design requires a socketed, inspectable, or leaded package rather than a fine-pitch land pattern. Program development is supported through the manufacturer's PIC and MPLAB-compatible tool environment.
Typical applications include industrial controllers, motor and actuator control systems, instrumentation, serial gateways, factory automation nodes, and embedded communications equipment. The 52 available I/O pins can distribute digital inputs and outputs around a control board, while the 40 MHz CPU can service protocol handling and control logic. A system requiring many digital signals can therefore avoid adding an external programmable logic device simply to expand I/O.
The primary design consideration is package continuity. Because the PIC18F6680-I/L uses a 68-pin PLCC, the PCB footprint, socket choice, and assembly process must be confirmed before release. Firmware, clock configuration, peripheral allocation, and programming-tool settings should also be checked against the manufacturer datasheet. The PLCC format is mechanically robust for serviceable industrial equipment but occupies more board area than a comparable fine-pitch package.
This page consolidates the manufacturer status, memory capacity, packaging, programming considerations, qualified same-family alternatives, and application guidance for engineers maintaining PIC18F6680-I/L designs. It also distinguishes the industrial -I/L ordering code from related grade and package options so replacement decisions account for both electrical limits and PCB compatibility.
直接替换替代料: PIC18F6680-I/L ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC18F6680-I/L (相同外形与封装尺寸) ——差异在于 Operating Temperature, Program Memory Size, Package, Program Memory Type, ADC.
PIC18F6680-E/L
✅ 直接替换联系询价
查看数据手册 →PIC18F8680-I/L
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC18F8585-I/L
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PIC18F6585-I/L
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PIC18F6680-I/L 最大额定值与电气特性
| Microcontroller Type | 8-bit RISC microcontroller |
| Program Memory Size | 64 KB Flash |
| RAM Size | 3,328 bytes |
| Data EEPROM | 1,024 bytes |
| Maximum CPU Frequency | 40 MHz |
| Operating Voltage | 5 V |
| I/O Pin Count | 52 pins |
| 封装 | 68-pin PLCC |
| Temperature Grade | Industrial (-I) |
| Program Memory Type | Enhanced Flash |
| 安装类型 | Surface mount |
| Packaging Format | Tube |
| Development Tool | MPLAB-compatible PIC programming and debug environment |
| Instruction Architecture | PIC18 8-bit RISC |
PIC18F6680-I/L 68-pin plcc 引脚配置指南
PIC18F6680-I/L(68-pin plcc 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC18F6680-I/L.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC18F6680-I/L 适用于 6 应用s: Industrial Control Systems, Factory Automation and Data Acquisition, Motor and Actuator Control, Instrumentation and Embedded Measurement, Serial Communication Gateways, Embedded Communications Equipment.
Industrial Control Systems
The PIC18F6680-I/L fits legacy industrial controllers because its 64 KB enhanced Flash stores control firmware, while 3,328 bytes of RAM supports task variables and 52 I/O pins connect sensors, relays, and status indicators. At 5 V and up to 40 MHz, it can coordinate real-time control logic without an external processor. The industrial -I grade and 68-pin PLCC package support maintenance of established control boards. Designers should preserve the original pin table, oscillator configuration, and peripheral assignments because the manufacturer classifies the device as not recommended for new designs.
推荐
Factory Automation and Data Acquisition
PIC18F6680-I/L is suitable for factory automation nodes that combine digital process controls with serial data collection. Its 52 I/O pins can support discrete inputs, outputs, and interface handshakes, while the 40 MHz 8-bit RISC core handles protocol framing and control sequencing. The 64 KB Flash capacity provides room for application code and parameter tables, and the 5 V operating arrangement supports conventional embedded control hardware. A designer replacing this part must verify the exact PLCC pin functions and maintain timing margins for the acquisition and communication routines.
推荐
Motor and Actuator Control
The PIC18F6680-I/L can serve as the supervisory controller in stepper, solenoid, valve, and actuator systems. Its 40 MHz processing speed allows timing loops to coexist with communication handling, and its 52 I/O pins provide ample connections for driver enables, direction signals, limit inputs, and fault detection. The 3,328-byte RAM area is suitable for maintaining motion state, while 64 KB Flash accommodates control tables and diagnostic logic. For new designs, confirm timer, PWM, and I/O mappings against the manufacturer documentation before relying on a family-related replacement.
推荐
Instrumentation and Embedded Measurement
PIC18F6680-I/L is well matched to legacy instrumentation equipment requiring local control, calibration storage, and a broad digital interface. The 64 KB enhanced Flash can hold measurement routines and calibration tables, while 1,024 bytes of EEPROM preserve nonvolatile settings. Its 52 I/O pins can support display controls, front-panel keys, sensor selects, and external converters. The 68-pin PLCC format also allows an inspectable socketed implementation in serviceable instruments. Engineers should confirm peripheral availability, analog-interface requirements, and timing during any replacement review.
推荐
Serial Communication Gateways
PIC18F6680-I/L can act as a local protocol-conversion or supervisory gateway between embedded equipment and a host system. The 40 MHz core provides timing headroom for framing, checksum, buffering, and command parsing, while 3,328 bytes of RAM can support multiple communication buffers. Its 52 I/O pins accommodate serial signals, status LEDs, mode controls, and service interfaces. The 5 V device and 68-pin PLCC package are practical for older control cabinets where board continuity is important. Validate clock settings, interrupt priorities, and connector-level electrical specifications in the target system.
推荐
Embedded Communications Equipment
The PIC18F6680-I/L is appropriate for maintaining embedded communications equipment that uses the MCU for configuration, supervisory logic, and peripheral coordination. Its 64 KB of enhanced Flash supports protocol stacks and application firmware, while the 8-bit RISC architecture provides straightforward integration with established PIC18 code bases. The 52 available I/O pins simplify connections to transceivers, status indicators, and configuration inputs. The industrial-grade -I ordering code preserves the intended environmental class of an installed platform. When substituting another family member, verify that every required communication peripheral and interrupt vector remains present.
推荐
推荐产品汇总
工程参考数据: PIC18F6680-I/L ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC18F6680-E/L | PIC18F8680-I/L | PIC18F8585-I/L | PIC18F6585-I/L |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-pin PLCC | 68-pin PLCC - same | 68-pin PLCC - same | 68-pin PLCC - same | 68-pin PLCC - same |
| Architecture | 8-bit PIC18 RISC | 8-bit PIC18 RISC | 8-bit PIC18 RISC | 8-bit PIC18 RISC | 8-bit PIC18 RISC |
| Program Memory | 64 KB enhanced Flash | 64 KB enhanced Flash | 64 KB enhanced Flash | 64 KB enhanced Flash | 64 KB enhanced Flash |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Operating Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Industrial (-I) | Extended (-E), 40 C upper-grade difference | Industrial (-I) | Industrial (-I) | Industrial (-I) |
关键差异点
- Exact industrial-grade and PLCC ordering combination (对比 PIC18F6680-E/L)
- Established 52-I/O PLCC platform (对比 PIC18F8680-I/L)
- PLCC leaded assembly and socketability (对比 PIC18F6680-I/PT)
- 64 KB enhanced-Flash program capacity (对比 PIC18F6585-I/L)
设计说明
Treat the 68-pin PLCC footprint as immutable during PCB layout review. Confirm pad positions, package orientation, pin 1 location, socket compatibility, and clearance around the body before ordering boards. PIC18F6680-I/PT is not a footprint-compatible substitute because it uses a 64-pin TQFP package. If the board must transition to a smaller package, redesign the layout and revalidate every peripheral, power, ground, programming, and signal connection.
Design the 5 V supply and decoupling around the limits and recommendations in the Microchip PIC18F6680 family datasheet. Place the required bulk and high-frequency capacitors close to the device supply pins, with short ground returns and a stable ground reference. Verify startup, brownout, clock-source, and operating-voltage conditions at temperature. A package or family substitution should not be approved until its electrical limits and clock configuration match the original design.
Do not equate an identical PLCC package with automatic interchangeability. PIC18F6680-E/L changes the -I temperature-grade designation, while PIC18F8680-I/L, PIC18F8585-I/L, and PIC18F6585-I/L may differ in peripheral availability, interrupt sources, and pin multiplexing. Review the complete manufacturer pin tables, configuration bits, device identity values, peripheral registers, and timing characteristics. Revalidate firmware and peripheral operation before production release.
Preserve the established signal-routing topology when maintaining a PIC18F6680-I/L board. High-speed clock, programming, communications, and sensitive input routes should retain their original topology, impedance assumptions, and grounding. Because PLCC leads permit a wider assembly pitch than fine-pitch alternatives, check connector density and service access on the assembled board. Avoid adding new high-energy switching nodes near sensitive MCU traces without reviewing return currents and bypass placement.
合规信息
The -I suffix identifies the industrial temperature grade, not AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses were not stated in the product information and remain unknown.