PIC18F96J60T-I/PF - 8-bit 41.67MHz MCU 64KB Flash Ethernet TQFP-100 | Microchip
料号： PIC18F96J60T-I/PF ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $9.2 | $9.20 |
| 10 | $8.45 | $84.50 |
| 100 | $7.55 | $755.00 |
| 500 | $6.85 | $3,425.00 |
| 1,000 | $6.2 | $6,200.00 |
PIC18F96J60T-I/PF 概述
A microcontroller (MCU) is a single-chip computer containing a CPU, RAM, non-volatile program storage, and programmable I/O peripherals. The PIC18 family is Microchip's 8-bit RISC architecture family positioned within the broader PIC hierarchy: PIC18 -> PIC -> 8-bit MCU -> microcontroller -> embedded computing -> semiconductor. The 'J' sub-family is built on a 3.3V-only process with nanoWatt XLP deep-sleep modes and is positioned between the legacy PIC16 and the 16-bit dsPIC/PIC24 families.
Key features include 64 KB Flash (32K x 16), 3808 bytes RAM, 384 bytes EEPROM, 70 general-purpose I/O pins, an integrated 10Base-T Ethernet MAC + PHY, two USARTs, two MSSP (SPI/I2C) ports, a 10-channel 10-bit ADC, and four 16-bit timers. The integrated PHY eliminates the need for an external Ethernet transceiver, which simplifies BOM and PCB layout for connected-node designs.
Technically, the '96J60' is distinguished from the '97J60' by its lower memory footprint (64 KB vs 128 KB Flash) but shares the same Ethernet peripheral, the same instruction set, and the same 100-pin TQFP package option. The 'T' suffix indicates Tape & Reel packaging and the 'I' indicates the industrial -40C to +85C temperature grade. Internal regulator-free 3.3V-only operation simplifies power-tree design but requires a clean 3.3V rail.
Typical applications include industrial automation nodes, building automation controllers, Ethernet-connected sensors, home control gateways, security panels, and instrumentation with remote monitoring. The integrated Ethernet peripheral is particularly suited to any appliance that needs to publish data to a LAN without an external network processor.
When designing with this part, ensure a 3.3V +/- 10% supply and keep the analog/digital ground returns separated near the IC to preserve ADC accuracy. The integrated PHY requires a 1:1 center-tapped transformer (e.g., a Pulse H1102 or equivalent) on the Ethernet line interface; omitting it prevents link establishment. The data on this page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collated on the manufacturer's datasheet.
直接替换替代料： PIC18F96J60T-I/PF ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC18F96J60T-I/PF （相同外形与封装尺寸） ——差异在于 Operating Temperature, Package, ADC, CPU Speed, Core Architecture.
快速对比工具——选择替代料号进行并排对比：
PIC18F96J60-I/PF
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →PIC18F97J60T-I/PF
✅ 直接替换📋 参考替代料（不在目录中）
PIC18F87J60T-I/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC18F96J65-I/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC18F86J60T-I/PT
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$6.04 / 个
查看数据手册 →PIC18F96J60T-I/PF 最大额定值与电气特性
| Core Architecture | PIC 8-bit RISC |
| Family | PIC18F97J60 (PIC18J series) |
| Maximum CPU Clock | 41.667 MHz (10 MIPS) |
| Program Memory (Flash) | 64 KB (32K x 16) |
| RAM | 3808 bytes |
| EEPROM | 384 bytes |
| 电源电压 | 3.3 V (3.0 V to 3.6 V) |
| 工作温度 | -40C to +85C (industrial) |
| I/O Pins | 70 |
| Integrated Ethernet | 10Base-T MAC + PHY (10 Mbps) |
| ADC | 10-bit, 10 channels |
| Timers | 4 x 16-bit |
| Communication | 2 x USART, 2 x MSSP (SPI / I2C) |
| 封装 | 100-pin TQFP (14x14 mm), TQFP-100 |
| 安装类型 | Surface Mount |
| MSL 等级 | 3 (per JEDEC J-STD-020) |
| RoHS 状态 | Compliant |
PIC18F96J60T-I/PF 100-pin tqfp (14x14 mm), tqfp-100 引脚配置指南
PIC18F96J60T-I/PF（100-pin tqfp (14x14 mm), tqfp-100 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： PIC18F96J60T-I/PF.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC18F96J60T-I/PF 适用于 6 应用s: Industrial Automation Ethernet Node, Building Automation Controller, Ethernet-Connected Sensor / Data Logger, Home Control Gateway, Security and Access Control Panel, Remote Monitoring Instrumentation.
Industrial Automation Ethernet Node
The PIC18F96J60T-I/PF is well suited to industrial automation nodes because its integrated 10 Mbps Ethernet MAC + PHY eliminates the need for an external transceiver, reducing BOM cost on conveyor controllers, motor starters, and remote I/O modules. The 8-bit 41.667 MHz core comfortably handles Modbus TCP framing, MQTT-SN, and proprietary industrial protocols while the 3808 bytes RAM is sufficient for a TCP/IP socket and a small application buffer. The 70 GPIO pins can drive opto-isolated inputs and relay outputs directly; only a 3.3 V supply and a center-tapped transformer are required to bring the node onto the plant LAN. Choose this part when the application needs Ethernet connectivity and modest analog/digital I/O without stepping up to a 32-bit ARM-class MCU.
推荐
Building Automation Controller
For HVAC zoning, lighting panels, and BACnet/IP gateways, the PIC18F96J60T-I/PF delivers a single-chip Ethernet node with enough Flash (64 KB) for typical BACnet/IP or Modbus stack plus application logic. The industrial -40C to +85C operating range handles plenum enclosures and rooftop cabinets without derating. The two USARTs allow simultaneous connection to a BACnet MS-TP trunk and an external sensor, while the 10-bit ADC reads thermistor inputs for room-temperature regulation. Compared with a discrete MCU + external PHY design, this part saves PCB area, reduces EMI exposure on the analog ADC inputs, and shortens firmware bring-up by months.
推荐
Ethernet-Connected Sensor / Data Logger
Remote sensors that publish temperature, humidity, or vibration data over LAN benefit from the PIC18F96J60T-I/PF's integrated Ethernet MAC+PHY and 10-bit 10-channel ADC, which sample multiple analog inputs without an external multiplexer. The 384 bytes of EEPROM store calibration constants and the 64 KB Flash holds a TCP/IP stack plus the application. The 3.3 V operation allows direct battery/regulator compatibility with Li-ion cells and energy-harvesting supplies, and the nanoWatt XLP sleep currents extend unattended deployment life. Engineers often pair this MCU with a 24LC01 EEPROM for event logs and an MCP1700 LDO for power conditioning.
推荐
Home Control Gateway
Smart-home hubs, irrigation controllers, and appliance control panels use the PIC18F96J60T-I/PF as a low-cost, low-power bridge between an Ethernet LAN and local RS-485 or wireless sub-networks. The integrated Ethernet peripheral simplifies the LAN interface, while the two MSSP ports drive SPI peripherals such as an MRF24J40 802.15.4 radio or a LoRa SX1276, and the two USARTs connect to legacy RS-485 HVAC or security wiring. The 8-bit MIPS core is ample for HTTP server / REST-API logic for a typical 30-device home network, and the 100-pin TQFP provides ample GPIO to drive status LEDs and user pushbuttons.
推荐
Security and Access Control Panel
For IP-enabled alarm panels, keypad controllers, and access-control readers, the PIC18F96J60T-I/PF provides 64 KB of authenticated firmware storage, integrated MAC+PHY for alarm-event reporting, and sufficient I/O to read multiple reed switches, PIR sensors, and keypad matrices. The industrial temperature range supports outdoor and garage installations, and the internal EEPROM securely stores 100+ access credentials or alarm codes. A 100-pin TQFP package fits on a 100mm x 70mm panel PCB with space for an Ethernet magnetics module, a backup-battery charger IC, and an external buzzer driver.
推荐
Remote Monitoring Instrumentation
Test and measurement instruments such as bench multimeters, lab data loggers, and remote weather stations benefit from the PIC18F96J60T-I/PF's integrated Ethernet (for NTP time sync, remote SCADA polling, and web dashboards), 10-bit 10-channel ADC (for direct transducer measurement), and 64 KB Flash (for vendor calibration tables and web pages). The 8-bit core executes the TCP/IP stack and the measurement loop within a single MCU; an external FRAM such as FM25L16 stores high-rate transient captures when the ADC is oversampled. Compared with discrete MCU + ENC28J60 designs, this part saves PCB area, reduces firmware complexity, and lowers BOM cost by roughly 20-30%.
推荐
推荐产品汇总
工程参考数据： PIC18F96J60T-I/PF ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC18F96J60-I/PF | PIC18F97J60T-I/PF | PIC18F86J60T-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (PF) 14x14 mm | TQFP-100 (PF) - same | TQFP-100 (PF) - same | TQFP-100 (PT) - same footprint |
| Flash | 64 KB | 64 KB | 128 KB | 64 KB |
| RAM | 3808 bytes | 3808 bytes | 3808 bytes | 3808 bytes |
| EEPROM | 384 bytes | 384 bytes | 384 bytes | 384 bytes |
| Max CPU Clock | 41.667 MHz (10 MIPS) | 41.667 MHz | 41.667 MHz | 41.667 MHz |
| Integrated Ethernet | 10Base-T MAC + PHY | 10Base-T MAC + PHY | 10Base-T MAC + PHY | 10Base-T MAC + PHY |
| Operating Voltage | 3.3 V (3.0-3.6 V) | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| I/O Pins | 70 | 70 | 70 | 70 |
关键差异点
- Integrated 10Base-T MAC + PHY eliminates external Ethernet transceiver （对比 Microchip ENC28J60-I/SP (external SPI Ethernet controller))
- 64 KB Flash is right-sized for cost-sensitive Ethernet nodes （对比 PIC18F97J60T-I/PF (128 KB Flash))
- Industrial -40C to +85C operating temperature without added cost （对比 PIC18F96J60-E/PF (extended temperature variant))
设计说明
The PIC18F96J60T-I/PF operates from a single 3.3 V supply (3.0 V to 3.6 V) and is NOT 5 V tolerant. Use an MCP1700-3302E LDO or equivalent to derive 3.3 V from a 5 V rail. Place a 10 uF bulk cap plus a 0.1 uF decoupling cap within 5 mm of each VDD pin pair; the Ethernet PHY is sensitive to supply noise and can drop packets if decoupling is insufficient.
Place the 1:1 center-tapped Ethernet magnetics (e.g., Pulse H1102 or equivalent) within 25 mm of the Ethernet pins and keep the differential TXOP/TXON/RXIP/RXIN traces as a matched-length 100-ohm differential pair on the top layer only. Reference the analog ground (AGND/ETHVSS) to the digital ground at a single point under the IC. Keep ADC traces away from the Ethernet magnetics to preserve 10-bit ADC accuracy.
Do not omit the Ethernet transformer - the integrated PHY will NOT link without it. Do not apply 5 V to any I/O; the 'J' family has no internal 5V regulator. Ensure the 8 MHz primary oscillator is not loaded with long traces; use a 4-layer PCB if possible and tie the Ethernet RBIAS pin to ground through a 12.4 kohm 1% resistor per the datasheet reference circuit.
Series-terminate USART and SPI traces longer than 50 mm to suppress ringing on 41.667 MHz edges. For MSSP SPI bus running above 10 MHz, place 22-33 ohm series resistors at the driver output. Keep the Ethernet magnetics-to-RJ45 traces on a single layer and stitch ground vias along the differential pair to maintain 100-ohm impedance and reduce emissions.
合规信息
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified (consumer/industrial grade only).
