PIC24FJ32GA004-I/ML - 32MHz 16-Bit MCU | Microchip Technology
料号: PIC24FJ32GA004-I/ML ✓ 量产中PIC24FJ32GA004-I/ML 概述
A PIC24F microcontroller is a general-purpose 16-bit embedded controller positioned between 8-bit microcontrollers and higher-performance 32-bit processors. Its modified Harvard architecture separates program and data memory access, while its C-compiler-optimized instruction set supports efficient control routines. Within the broader semiconductor hierarchy, the PIC24F family belongs to the microcontroller class of embedded processors and combines general-purpose processing with programmable peripherals for control, communication, measurement, and timing.
Key features include a 17-bit single-cycle hardware multiplier, a 16-bit hardware divider, a 16-bit working-register array, an 8 MHz internal oscillator with a 4x PLL option, and multiple divide options. The combination of 32 KB Flash and 8192 bytes of RAM gives embedded designers enough memory for compact control firmware, parameter storage, state machines, and moderate protocol handling. The 44-QFN package also keeps the footprint compact while exposing 35 I/O pins for external sensors, actuators, communications, and human-interface circuitry.
The core can reach 16 MIPS at 32 MHz. This processing headroom is useful for time-critical control, digital filtering, communication protocols, and mixed analog-and-digital monitoring without moving to a larger 32-bit processor. The internal 8 MHz oscillator and selectable PLL provide a practical clocking foundation for systems that need accurate timing but cannot depend on an external crystal. Exact ADC, timer, communications, voltage, and current-limit details should be confirmed against the manufacturer datasheet for the selected package and temperature grade.
Typical uses include industrial sensor nodes, building controls, compact instrumentation, motor-control peripherals, communications modules, and consumer-equipment subcontrollers. Its 35 I/O pins make it particularly useful when a design needs several digital interfaces while retaining space for analog measurements or an external bus. The device can also serve as the core of a small control board assembled around the manufacturer's Explorer 16/32 platform.
When laying out a PCB, treat the exposed pad and thermal path as part of the electrical design. Place decoupling capacitors close to the appropriate supply pins, preserve the manufacturer's recommended grounding arrangement, and confirm exposed-pad soldering and land-pattern requirements before fabrication. Programming, clock configuration, peripheral initialization, and brownout behavior must follow the device's programming and datasheet requirements.
This product page consolidates the core device ratings, package information, application guidance, design cautions, and technically relevant family alternatives. It is intended to accelerate engineering evaluation while keeping the final schematic, firmware, and qualification decisions tied to the manufacturer's authoritative documentation.
直接替换替代料: PIC24FJ32GA004-I/ML ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC24FJ32GA004-I/ML (相同外形与封装尺寸) ——差异在于 Package, Operating Temperature, Program Memory (Flash), ADC, Internal Oscillator.
PIC24FJ32GA004T-I/ML
✅ 直接替换📋 参考替代料(不在目录中)
PIC24FJ48GA004T-I/ML
✅ 直接替换联系询价
查看数据手册 →PIC24FJ64GA004-I/ML
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PIC24FJ32GA004-I/ML 最大额定值与电气特性
| Product Type | 16-bit Flash Microcontroller |
| Product Series | PIC24F |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Architecture | Modified Harvard Architecture |
| Program Flash Memory | 32 KB (11K x 24) |
| Static RAM | 8192 bytes |
| Multiplier | 17-bit x 17-bit single-cycle hardware multiplier |
| Hardware Divider | 16-bit hardware divider |
| Working Register Array | 16-bit |
| Internal Oscillator | 8 MHz |
| PLL Multiplication | 4x option |
| I/O Pin Count | 35 pins |
| 封装 | 44-QFN (8 mm x 8 mm) |
| 工作温度 | -40 °C to +85 °C |
| 生命周期状态 | Active |
PIC24FJ32GA004-I/ML 44-qfn (8 mm x 8 mm) 引脚配置指南
PIC24FJ32GA004-I/ML(44-qfn (8 mm x 8 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC24FJ32GA004-I/ML.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC24FJ32GA004-I/ML 适用于 6 应用s: Industrial Sensor Node, Building Control Module, Compact Instrumentation, Motor and Actuator Control, Communications Gateway, Consumer Equipment Subcontroller.
Industrial Sensor Node
PIC24FJ32GA004-I/ML fits compact industrial sensor nodes that combine digital inputs, measurement, local filtering, and status communication. Its 16 MIPS execution rate provides useful margin for sampling schedules, debounce logic, and protocol servicing, while the 17-bit single-cycle multiplier accelerates common scaling and filtering operations. The 35 I/O pins allow digital sensors, status indicators, and communications devices to share one controller. Its -40 °C to +85 °C rating suits controlled industrial enclosures. The device is placed beside the sensor circuitry, and its firmware coordinates acquisition, filtering, threshold evaluation, and data transfer. Designers should budget clock configuration, sensor settling time, and communication latency against the available processor headroom.
推荐
Building Control Module
The PIC24FJ32GA004-I/ML is appropriate for building-control submodules that supervise lighting, HVAC interfaces, sensors, and occupancy-related digital inputs. Its 35 I/O pins reduce the need for external I/O expanders in compact controller designs, while 32 KB of Flash supports organized control logic, configuration data, and communication handlers. The 16 MIPS core can divide time among input scanning, state-machine execution, and periodic reporting. A practical implementation places the microcontroller between field-contact inputs and relay or communication interfaces. Firmware should include debounce, safe-state behavior, and watchdog recovery. Confirm the electrical limits of every connected field device and use suitable isolation or protection where wiring leaves the enclosure.
推荐
Compact Instrumentation
PIC24FJ32GA004-I/ML suits compact instrumentation where a 16-bit processor, moderate memory, and numerous mixed-signal connections are required in an 8 mm by 8 mm footprint. The 16 MIPS throughput allows control algorithms, calibration logic, and user-interface updates to share processing time, while the hardware multiplier and divider accelerate common numerical operations. Its 32 KB Flash accommodates firmware and constants, and 8192 bytes of RAM supports working buffers. In a measurement instrument, the controller can coordinate signal conditioning, conversion control, calibration storage, and front-panel updates. Layout must keep sensitive analog paths away from switching nodes and clocks, while firmware should verify that all timing assumptions remain valid at the selected system clock.
推荐
Motor and Actuator Control
PIC24FJ32GA004-I/ML can serve as the supervisory controller in compact motor or actuator systems that combine position sensing, limit inputs, local decision logic, and external drive signaling. Its 16-bit architecture and 16 MIPS throughput provide responsive task execution, while dedicated multiplication and division support common speed, ratio, and compensation calculations. The 35 available I/O pins allow sensor inputs and control outputs to be integrated without excessive logic glue. In operation, the firmware processes feedback, applies control states, and monitors fault conditions before updating drive commands. Designers should separate noisy motor wiring from sensitive control traces and verify whether the specific timer, PWM, and fault-management resources meet the application’s exact timing requirements.
推荐
Communications Gateway
PIC24FJ32GA004-I/ML is useful in small protocol-conversion or communications gateways that must manage a local serial interface, configuration storage, status reporting, and real-time housekeeping. Its 16 MIPS performance is sufficient for moderate protocol handling, while 32 KB of Flash and 8192 bytes of RAM support parsers, buffers, and application state. The 35 I/O pins provide flexibility for multiple logic-level interfaces, indicators, and configuration controls. A gateway implementation can use the microcontroller to validate incoming frames, translate data, maintain local status, and respond through another interface. Timing must be measured at the maximum expected traffic rate, and buffer sizing should be checked for burst arrival patterns. Add appropriate galvanic isolation or protection when the port connects outside the equipment enclosure.
推荐
Consumer Equipment Subcontroller
PIC24FJ32GA004-I/ML can serve as a subcontroller in consumer equipment where a main processor delegates local keypad scanning, indicator control, accessory monitoring, and configuration storage. Its compact 44-QFN package supports space-constrained boards, and the 16-bit core provides more arithmetic capability than a basic 8-bit controller without requiring a high-end processor. The 35 I/O pins simplify connection to switches, displays, and interface circuits, while 32 KB of Flash accommodates modular firmware. The device is typically initialized during startup, performs periodic input processing, and communicates status with the main controller. Firmware should handle switch debounce, stuck-input detection, and safe defaults for failed accessories. The package’s exposed-pad connection and recommended solder process must follow the manufacturer layout requirements.
推荐
推荐产品汇总
工程参考数据: PIC24FJ32GA004-I/ML ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24FJ32GA004T-I/ML | PIC24FJ48GA004T-I/ML | PIC24FJ64GA004-I/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8 mm x 8 mm) | 44-QFN (8 mm x 8 mm) | 44-QFN (8 mm x 8 mm) | 44-QFN (8 mm x 8 mm) |
| Product Type | 16-bit Flash Microcontroller | 16-bit Flash Microcontroller | 16-bit Flash Microcontroller | 16-bit Flash Microcontroller |
| Program Flash Memory | 32 KB (11K x 24) | 32 KB (11K x 24) | 48 KB | 64 KB |
关键差异点
- Compact 16-bit processing with 35 I/O pins (对比 PIC24FJ48GA004T-I/ML)
- Direct industrial-temperature option (对比 PIC24FJ32GA004T-I/ML)
- Right-sized memory for compact control firmware (对比 PIC24FJ64GA004-I/ML)
设计说明
Use the manufacturer’s 44-QFN land pattern and exposed-pad recommendations exactly, including the thermal-via arrangement and solder-mask definition. The exposed pad is part of the package thermal and electrical design and should not be treated as an optional copper feature. Place the device so that decoupling paths can connect directly to the relevant supply pins, and preserve a short, low-impedance ground return beneath the package.
Separate clock, programming, and high-speed digital routes from sensitive analog inputs. Keep oscillator traces short and follow the recommended grounding and via arrangement, especially if an external crystal or resonator is used. Place bulk and high-frequency bypass capacitance according to the datasheet network and avoid routing noisy switching or motor-current paths beneath the QFN footprint. This reduces coupling into measurement and control signals.
Do not treat the 44-QFN footprint alone as proof of drop-in firmware compatibility. Confirm the complete pin-description table, alternate-function assignments, power pins, clock configuration, programming pins, and exposed-pad connection for the exact MPN. For a migration to another GA004 memory-density member, also compare startup code, linker memory assumptions, peripheral availability, and interrupt-vector layout before releasing the PCB.
Budget regulator capacity from the actual clock, active peripherals, and I/O load rather than from the 16 MIPS figure alone. Verify the chosen supply range against every operating mode and include startup current, I/O drive current, and accessory loading in the worst-case calculation. Place the required bypass capacitors close to the supply pins and verify that the ground reference remains low impedance across the operating frequency range.
The 8 mm by 8 mm QFN has a compact thermal path, so copper area and exposed-pad soldering directly influence junction-temperature performance. Review the manufacturer’s maximum power and junction-temperature limits against the calculated device dissipation, ambient temperature, and enclosure temperature. For sustained high activity, enlarge the thermal copper path and include thermal vias where permitted by the land pattern rather than relying only on the nominal package copper area.
合规信息
The device is an active industrial-temperature PIC24F microcontroller. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed in the manufacturer's current compliance documentation for the exact ordering code.