PIC24FJ64GU205-E/PT - 32MHz 64KB USB MCU | Microchip Technology
料号: PIC24FJ64GU205-E/PT ✓ 量产中PIC24FJ64GU205-E/PT 概述
A microcontroller is a programmable semiconductor that combines a CPU, program memory, data memory, peripherals, and interface circuitry on one integrated circuit. The PIC24FJ64GU205 belongs to the 16-bit microcontroller hierarchy, combining a 32 MHz PIC24 processor core with dedicated USB and low-power peripherals. This makes it suitable for connected embedded products that need more processing capability and memory than an 8-bit MCU while retaining a compact package and low-power design.
Key features include 16 MIPS instruction performance, 64 KB of ECC Flash, 8 KB of SRAM, USB connectivity, and XLP low-power operation. ECC Flash supports reliable program storage, while SRAM provides working memory for protocol handling, control logic, and application state. The 48-pin TQFP provides a conventional fine-pitch surface-mount footprint with perimeter pins that are practical to inspect and route in production boards.
The PIC24 CPU executes 16-bit instructions and supports a 32 MHz operating frequency. USB connectivity allows the MCU to act as a USB device in applications such as data loggers, configuration interfaces, industrial peripherals, and USB-connected controls. The XLP feature set targets systems where standby, sleep, and wake behavior influence overall energy consumption, particularly in battery-powered instrumentation and portable accessories.
Typical applications include USB data acquisition, industrial control modules, compact environmental monitors, programmable instruments, communication interfaces, and low-power embedded control products. The same silicon family is also used by Microchip development platforms, including the PIC24FJ64GU205 Curiosity Nano board and the General Purpose Plug-in Module, which help engineers evaluate USB and low-power behavior before production hardware is finalized.
For PCB implementation, use the 48-pin TQFP land pattern and follow the pin-description and decoupling guidance in the manufacturer datasheet. Provide clean supply connections at both 3.3 V and core voltage pins, place decoupling capacitors close to their associated supply pins, and confirm external USB data-line impedance and ESD requirements before releasing the layout. The -E/PT orderable configuration is supplied in a tray, so pick-and-place and assembly planning must account for tray handling rather than reel-fed production.
直接替换替代料: PIC24FJ64GU205-E/PT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PIC24FJ64GU205-E/PT (相同外形与封装尺寸) ——差异在于 Package, Program Memory, RoHS Status, CPU Performance, Core Architecture.
PIC24FJ64GU205-I/PT
✅ 直接替换联系询价
查看数据手册 →PIC24FJ64GU205-E/PT 最大额定值与电气特性
| Product Type | 16-bit RISC Flash microcontroller |
| Processor Core | PIC24 CPU |
| Maximum CPU Frequency | 32 MHz |
| Instruction Performance | 16 MIPS |
| Program Memory | 64 KB (22K x 24 bits) ECC Flash |
| Data Memory | 8 KB SRAM |
| USB Interface | Integrated USB |
| Low-Power Feature | XLP eXtreme Low-Power |
| Operating Supply | 3.3 V |
| Temperature Grade | Extended temperature |
| 封装 | 48-pin TQFP (7 x 7 mm) |
| 安装类型 | Surface mount |
| Packaging | Tray |
| 引脚数量 | 48 pins |
| 接口类型 | USB |
| Product Family | PIC24FJ64GP205/GU205 |
PIC24FJ64GU205-E/PT 48-pin tqfp (7 x 7 mm) 引脚配置指南
PIC24FJ64GU205-E/PT(48-pin tqfp (7 x 7 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: PIC24FJ64GU205-E/PT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PIC24FJ64GU205-E/PT 适用于 6 应用s: USB Data Acquisition Module, Industrial Control Module, Portable Environmental Monitor, Programmable Test Instrument, USB Configuration Interface, Low-Power Embedded Controller.
USB Data Acquisition Module
The PIC24FJ64GU205-E/PT fits compact USB data-acquisition modules because its 32 MHz PIC24 CPU executes up to 16 MIPS while 64 KB of ECC Flash holds firmware and 8 KB of SRAM supports acquisition state. The integrated USB peripheral enables direct host communication without a separate interface controller. Place signal conditioning ahead of the appropriate analog inputs and provide USB ESD protection, while using the 48-pin TQFP footprint and local 3.3 V and core-voltage decoupling to preserve signal integrity.
推荐
Industrial Control Module
The PIC24FJ64GU205-E/PT is appropriate for industrial control modules that combine local logic, USB configuration, and low-power operation. Its 16-bit PIC24 architecture at 32 MHz provides more arithmetic and control headroom than an 8-bit MCU, while 64 KB of ECC Flash and 8 KB of SRAM support protocol handling and working state. The integrated USB interface enables commissioning and diagnostics. Select external interface protection appropriate to the industrial environment and validate timing against the final sensor and actuator load.
推荐
Portable Environmental Monitor
The PIC24FJ64GU205-E/PT supports portable environmental monitors by combining a 32 MHz control core with XLP low-power features and 8 KB of SRAM. The MCU can sample sensors, manage thresholds, buffer readings, and communicate through USB while retaining 64 KB of ECC Flash for application firmware and calibration data. Use the low-power operating modes intentionally, isolate sensitive analog paths from USB and switching circuitry, and confirm the temperature requirements of the intended enclosure and sensing location.
推荐
Programmable Test Instrument
The PIC24FJ64GU205-E/PT can serve as the control core of a programmable test instrument because its 32 MHz CPU, 64 KB ECC Flash, and 8 KB SRAM provide enough resource for sequencing, measurements, and USB-based command handling. Integrated USB permits connection to a host PC for calibration, result export, and remote configuration. Keep analog and digital return paths separated, use short ground references for measurement circuitry, and verify that the chosen connector and ESD strategy satisfy the target interface environment.
推荐
USB Configuration Interface
The PIC24FJ64GU205-E/PT is well suited to a USB configuration interface because USB connectivity and a 16-bit processor are integrated on the same device. At 32 MHz, the MCU can validate commands, update configuration, and provide status feedback without an external USB controller. The 64 KB ECC Flash is useful for storing firmware and persistent parameters, although actual write endurance and update strategy should be evaluated for the selected data rate. Use the manufacturer pin description to route USB D-plus and D-minus consistently.
推荐
Low-Power Embedded Controller
The PIC24FJ64GU205-E/PT works as a low-power embedded controller when a design needs more processing than an 8-bit MCU while retaining XLP operating features. The 32 MHz PIC24 CPU supports responsive control, the integrated USB peripheral permits periodic connectivity, and 8 KB of SRAM covers moderate working sets. Define wake sources and duty-cycle behavior before finalizing power-budget calculations. Decoupling should be placed close to both 3.3 V and core supply pins, and unused inputs should be configured according to the manufacturer recommendations.
推荐
推荐产品汇总
工程参考数据: PIC24FJ64GU205-E/PT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24FJ64GU205-I/PT |
|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology |
| Package | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) |
| CPU | 16-bit PIC24 RISC | 16-bit PIC24 RISC |
| Maximum Frequency | 32 MHz | 32 MHz |
| Program Memory | 64 KB ECC Flash (22K x 24 bits) | 64 KB ECC Flash (22K x 24 bits) |
| RAM | 8 KB SRAM | 8 KB SRAM |
| USB | Integrated USB | Integrated USB |
| Low-Power Features | XLP | XLP |
| Temperature Grade | Extended temperature (-E) | Industrial temperature (-I) |
| Performance | 16 MIPS | 16 MIPS |
关键差异点
- Extended-temperature ordering option (对比 PIC24FJ64GU205-I/PT)
- Integrated USB with substantial processing capacity (对比 PIC24FJ64GU205-I/PT)
- Compact 48-pin TQFP implementation (对比 PIC24FJ64GU205-I/PT)
设计说明
Use the 48-pin TQFP land pattern defined for the exact package and follow the manufacturer pin-description table when assigning signals. Place the required 3.3 V and core-voltage decoupling capacitors adjacent to their associated supply pins, with short ground returns. Route USB D-plus and D-minus as a controlled impedance pair, keep the USB interface away from switching nodes, and avoid placing test pads or unrelated high-current paths beneath the MCU footprint.
Separate analog measurement or sensor inputs from USB, clock, and fast digital return paths. Keep oscillator and decoupling connections compact, maintain continuous ground references beneath the device where the layout permits, and use a quiet analog region for sensitive components. The integrated USB interface does not remove the need for correct data-line routing, connector mechanics, and external ESD protection; those protections should be placed near the connector rather than beside the MCU.
Do not substitute PIC24FJ64GU205-I/PT for PIC24FJ64GU205-E/PT without confirming the system temperature requirement, because the ordering suffixes identify different temperature grades. Also verify whether the board assembler requires tray packaging specified by /PT; changing the packaging code is not an electrical substitution. Before production, confirm the exact MPN, firmware target, pin definitions, oscillator configuration, brownout settings, and USB implementation against the manufacturer documentation.
Treat the 3.3 V and internal core supplies as separate implementation points in the power tree. Check the family data sheet for the exact voltage domains, decoupling values, and power-up sequencing associated with the selected configuration before finalizing the supply network. For low-power designs, measure current in each operating mode rather than relying only on a single active-state value, and verify that USB attachment or wake events do not invalidate the intended sleep-state power budget.
合规信息
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this orderable configuration.