PIC24FJ96GA006T-I/PT - 16-bit 96KB Flash MCU, 64-TQFP | Microchip
料号： PIC24FJ96GA006T-I/PT ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $4.08 | $4.08 |
| 10 | $3.85 | $38.50 |
| 100 | $3.42 | $342.00 |
| 500 | $3.05 | $1,525.00 |
| 1,000 | $2.78 | $2,780.00 |
| 1,200 | $2.71 | $3,252.00 |
PIC24FJ96GA006T-I/PT 概述
Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC24F family is Microchip's 16-bit MCU line using a modified Harvard RISC architecture, positioned between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families. PIC24F devices specifically target low-power and cost-sensitive embedded applications requiring more performance and code density than 8-bit MCUs.
Key features of the PIC24FJ96GA006T-I/PT include eXtreme Low Power (XLP) technology for battery-friendly operation, dual I2C, dual SPI, and dual UART communication peripherals, multiple 16-bit timers, a 10-bit ADC, and a 16-bit Parallel Master Port. The integrated Peripheral Pin Select (PPS) feature allows flexible digital peripheral remapping, simplifying PCB layout. The 64-pin TQFP provides ample I/O for human-interface, sensor, and motor-control front-ends.
Technical depth: The PIC24FJ core operates from 2.0 V to 3.6 V, supports 16 MIPS performance, and includes hardware multiply/divide and a deterministic interrupt response. The 96 KB Flash is organized as 32K x 24 words, allowing C-compiler-friendly code density, while the 8 KB SRAM supports moderate data buffering. The device also features a Real-Time Clock Calendar (RTCC) with dedicated 32 kHz oscillator input.
Typical applications include industrial sensor nodes, portable medical devices, USB peripherals, graphical user interfaces with segmented LCDs, low-power wireless sensor hubs, and consumer appliance controllers. The wide peripheral mix suits connected-embedded designs that require multi-protocol communication and ample code space.
Design consideration: ensure the selected programming toolchain (MPLAB X IDE with XC16 compiler) is set for the PIC24FJ target, and respect the 3.3 V supply range to avoid damaging the core logic. For lowest standby power, leverage the deep-sleep mode with RTCC retention.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, helping engineers select and source the right MCU for volume production.
直接替换替代料： PIC24FJ96GA006T-I/PT ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC24FJ96GA006T-I/PT （相同外形与封装尺寸） ——差异在于 Core Architecture, Package, ADC, Program Memory (Flash), Mounting Type.
快速对比工具——选择替代料号进行并排对比：
PIC24FJ64GA006T-I/PT
✅ 直接替换✓ 有现货
$3.1 / 个
查看数据手册 →PIC24FJ128GA006T-I/PT
✅ 直接替换✓ 有现货
$3.78 / 个
查看数据手册 →PIC24FJ96GA006-I/PT
✅ 直接替换✓ 有现货
$3.94 / 个
查看数据手册 →PIC24FJ96GA006T-I/MR
✅ 直接替换📋 参考替代料（不在目录中）
PIC24FJ64GC006T-I/PT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC24FJ96GA006T-I/PT 最大额定值与电气特性
| Core Architecture | PIC24F (16-bit RISC, modified Harvard) |
| Maximum CPU Speed | 32 MHz (16 MIPS at 3.3 V) |
| Program Memory (Flash) | 96 KB (32K x 24 words) |
| Data Memory (SRAM) | 8 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| I/O Pins | 53 |
| 封装 | 64-pin TQFP (10x10 mm) |
| ADC | 10-bit |
| Communication Peripherals | 2x I2C, 2x SPI, 2x UART |
| Timers | Multiple 16-bit timers |
| Peripheral Pin Select (PPS) | Yes |
| Real-Time Clock Calendar (RTCC) | Yes |
| 工作温度 | -40C to +85C (Industrial) |
| 安装类型 | Surface Mount (Tape & Reel) |
| RoHS 状态 | Compliant |
PIC24FJ96GA006T-I/PT 引脚配置
| 引脚 1 | RC1 — Digital I/O with PPS remap capability |
| 引脚 2 | RC2 — Digital I/O with PPS remap capability |
| 引脚 3 | RC3 — Digital I/O with PPS remap capability |
| 引脚 4 | RC4 — Digital I/O with PPS remap capability |
| 引脚 5 | RC5 — Digital I/O with PPS remap capability |
| 引脚 6 | VSS — Ground reference |
| 引脚 7 | RC6 — Digital I/O with PPS remap capability |
| 引脚 8 | RC7 — Digital I/O with PPS remap capability |
| 引脚 9 | RC8 — Digital I/O with PPS remap capability |
| 引脚 10 | RC9 — Digital I/O with PPS remap capability |
| 引脚 11 | VDD — Positive supply (2.0V-3.6V) |
| 引脚 12 | VSS — Ground reference |
| 引脚 13 | RA0 — Analog input / digital I/O |
| 引脚 14 | RA1 — Analog input / digital I/O |
| 引脚 15 | RA2 — Analog input / digital I/O |
| 引脚 16 | RA3 — Analog input / digital I/O |
| 引脚 17 | RA4 — Analog input / digital I/O |
| 引脚 18 | RA5 — Analog input / digital I/O |
| 引脚 19 | RA6 — Analog input / digital I/O |
| 引脚 20 | RA7 — Analog input / digital I/O |
| 引脚 21 | VSS — Ground reference |
| 引脚 22 | VDD — Positive supply (2.0V-3.6V) |
| 引脚 23 | RB0 — Digital I/O / analog input |
| 引脚 24 | RB1 — Digital I/O / analog input |
| 引脚 25 | RB2 — Digital I/O / analog input |
| 引脚 26 | RB3 — Digital I/O / analog input |
| 引脚 27 | RB4 — Digital I/O / analog input |
| 引脚 28 | RB5 — Digital I/O / analog input / PGED3 |
| 引脚 29 | RB6 — Digital I/O / analog input / PGEC3 |
| 引脚 30 | RB7 — Digital I/O / analog input |
| 引脚 31 | RB8 — Digital I/O / analog input |
| 引脚 32 | RB9 — Digital I/O / analog input |
| 引脚 33 | RB10 — Digital I/O / analog input |
| 引脚 34 | RB11 — Digital I/O / analog input |
| 引脚 35 | VSS — Ground reference |
| 引脚 36 | VDD — Positive supply (2.0V-3.6V) |
| 引脚 37 | RD0 — Digital I/O with PPS remap capability |
| 引脚 38 | RD1 — Digital I/O with PPS remap capability |
| 引脚 39 | RD2 — Digital I/O with PPS remap capability |
| 引脚 40 | RD3 — Digital I/O with PPS remap capability |
| 引脚 41 | RD4 — Digital I/O with PPS remap capability |
| 引脚 42 | RD5 — Digital I/O with PPS remap capability |
| 引脚 43 | RD6 — Digital I/O with PPS remap capability |
| 引脚 44 | RD7 — Digital I/O with PPS remap capability |
| 引脚 45 | VSS — Ground reference |
| 引脚 46 | OSC1 — Crystal oscillator input |
| 引脚 47 | OSC2 — Crystal oscillator output |
| 引脚 48 | RD8 — Digital I/O with PPS remap capability |
| 引脚 49 | RD9 — Digital I/O with PPS remap capability |
| 引脚 50 | RD10 — Digital I/O with PPS remap capability |
| 引脚 51 | RD11 — Digital I/O with PPS remap capability |
| 引脚 52 | RD12 — Digital I/O with PPS remap capability |
| 引脚 53 | RD13 — Digital I/O with PPS remap capability |
| 引脚 54 | RD14 — Digital I/O with PPS remap capability |
| 引脚 55 | RD15 — Digital I/O with PPS remap capability |
| 引脚 56 | VSS — Ground reference |
| 引脚 57 | VDD — Positive supply (2.0V-3.6V) |
| 引脚 58 | RE0 — Digital I/O / analog input |
| 引脚 59 | RE1 — Digital I/O / analog input |
| 引脚 60 | RE2 — Digital I/O / analog input |
| 引脚 61 | RE3 — Digital I/O / analog input |
| 引脚 62 | RE4 — Digital I/O / analog input |
| 引脚 63 | RE5 — Digital I/O / analog input |
| 引脚 64 | RE6 — Digital I/O / analog input |
典型应用
PIC24FJ96GA006T-I/PT 适用于 6 应用s: Industrial Sensor Hubs, Portable Medical Devices, USB Peripherals, Graphical User Interfaces with LCD, Low-Power Wireless Sensor Hubs, Consumer Appliance Controllers.
Industrial Sensor Hubs
The PIC24FJ96GA006T-I/PT is well suited for industrial sensor hubs where multiple analog and digital sensors converge on a single processor. Its 10-bit ADC handles sensor signal conditioning while 96 KB Flash accommodates protocol stacks such as Modbus RTU or IO-Link. The wide 2.0-3.6 V supply range tolerates industrial 24 V rails after buck conversion. Low-power XLP modes suit battery-backed remote sensor nodes where sleep current is critical. PPS allows flexible PCB layout when routing SPI sensors.
推荐
Portable Medical Devices
In portable medical devices, the PIC24FJ96GA006T-I/PT offers the code space needed for FDA-class firmware while the 16 MIPS performance executes filtering algorithms at adequate sample rates. The 8 KB SRAM buffers sensor data between ADC reads and display updates. Industrial -40C to +85C temperature range covers clinical and home-use environments. With low sleep current, the device preserves battery life between measurements. USB device firmware fits in 96 KB Flash with stacks.
推荐
USB Peripherals
The PIC24FJ96GA006T-I/PT supports USB device applications via an external USB transceiver or the PIC24 USB-capable siblings, with 96 KB Flash accommodating USB stacks and HID/CDC class drivers. The 16 MIPS performance handles enumeration and bulk transfers with comfortable headroom. Dual UARTs and SPIs interface to wireless modules, sensors, or external storage. With 53 I/O pins, multiple endpoints (buttons, LEDs, displays) connect without expanders, simplifying BOM.
推荐
Graphical User Interfaces with LCD
For HMI panels driving segmented LCDs, the PIC24FJ96GA006T-I/PT integrates segmented LCD drivers in some family variants and provides PPS for flexible key-scan wiring. 96 KB Flash stores multi-language menus, font tables, and state machine code. The 32 MHz CPU refreshes displays smoothly while polling touch sensors and driving backlights via PWM. With 53 I/O pins, ample headroom exists for additional buttons and LED indicators.
推荐
Low-Power Wireless Sensor Hubs
The PIC24FJ96GA006T-I/PT serves as a low-power host for wireless sensor nodes with sub-GHz or BLE modules over UART/SPI. XLP deep-sleep with RTCC retention allows duty-cycled wake patterns that extend battery life to years. 96 KB Flash fits simple LoRaWAN or BLE beacon firmware profiles. Dual I2C/SPI/UART interfaces accommodate multiple sensors and radio modules simultaneously, while PPS reduces PCB routing complexity.
推荐
Consumer Appliance Controllers
In consumer appliance controllers such as coffee machines, washing machines, or smart kitchen devices, the PIC24FJ96GA006T-I/PT offers enough Flash for user-interface logic, sensor fusion, and motor-control algorithms. Its 16 MIPS performance handles PID loops for temperature or motor speed control. The 53 I/O pins connect directly to buttons, displays, relays, and TRIAC drivers, while PPS allows routing flexibility to simplify PCB layout.
推荐
推荐产品汇总
工程参考数据： PIC24FJ96GA006T-I/PT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24FJ64GA006T-I/PT | PIC24FJ128GA006T-I/PT | PIC24FJ96GA006-I/PT | PIC24FJ96GA006T-I/MR | PIC24FJ64GC006T-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Flash Memory | 96 KB | 64 KB | 128 KB | 96 KB | 96 KB | 64 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Max CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| I/O Pins | 53 | 53 | 53 | 53 | 53 | 53 |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
关键差异点
- 96 KB Flash in PIC24F family with XLP ultra-low-power technology （对比 PIC24FJ64GA006T-I/PT)
- Drop-in upgrade path to 128 KB Flash （对比 PIC24FJ128GA006T-I/PT)
- Tape & Reel packaging for high-volume assembly （对比 PIC24FJ96GA006-I/PT)
设计说明
Operate the PIC24FJ96GA006T-I/PT from a regulated 3.3 V supply within the 2.0 V-3.6 V range. Place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair (multiple VDD pins exist on this 64-pin package). For battery applications, add a bulk 10 uF capacitor near the VDD pin to handle inrush during radio transmissions when peripherals are co-located.
Route the crystal traces (OSC1/OSC2) short and symmetric to minimize stray capacitance. Keep the trace length under 5 mm and surround them with a ground pour for noise immunity. If using the internal oscillator, leave OSC1/OSC2 unconnected or grounded to reduce EMI pickup. Place the ICSP programming pins (PGECx/PGEDx) on accessible test points for in-circuit programming.
Do not exceed 3.6 V on any pin or VDD - the PIC24FJ core is not 5 V tolerant. When migrating from PIC18 to PIC24F, ensure C code uses 16-bit aware types; default int is 16 bits on PIC24, but pointer and arithmetic behaviors differ. Always configure the Configuration bits (FOSC, FWDT, JTAG, etc.) in code to avoid debugger-locked or runaway-watched devices after reset.
合规信息
RoHS and REACH compliance per Microchip product page. Industrial temperature grade -40C to +85C; not AEC-Q100 qualified (automotive).
