PIC24HJ64GP502-E/SP - 40 MIPS 16-bit MCU, 64KB Flash, 28-SPDIP | Microchip
料号： PIC24HJ64GP502-E/SP ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $8.1 | $8.10 |
| 10 | $7.4 | $74.00 |
| 100 | $6.55 | $655.00 |
| 500 | $5.92 | $2,960.00 |
| 1,000 | $5.3 | $5,300.00 |
PIC24HJ64GP502-E/SP 概述
A 16-bit microcontroller is a single-chip computer that processes instructions and data on an internal 16-bit data bus, doubling the throughput of 8-bit MCUs while remaining far simpler and lower-power than a 32-bit Cortex-M device. Within the system hierarchy, an MCU sits above the voltage regulator, oscillator, and reset supervisor in a typical embedded design, and below the application-layer firmware that defines the product's behaviour. The PIC24H family specifically targets high-speed, repetitive-control and DSP-adjacent computations, and is pin-compatible with the dsPIC33F family.
Key features of the PIC24HJ64GP502 include a 40 MHz internal clock (with PLL options for higher system clocks), 21 general-purpose I/O pins, an integrated 12-bit ADC with up to 10 channels (depending on package variant), three 16-bit timers that can be paired into a 32-bit timer, two output-capture modules, and a 16-bit parallel master port. The integrated 8-channel DMA controller offloads CPU cycles for peripheral data movement, freeing the core for control-loop math.
The PIC24HJ64GP502 uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction word, and a deterministic interrupt response. The 3.0 V to 3.6 V supply range, nanoWatt power management modes, and on-chip debugging via ICSP make it a strong fit for real-time control applications. The Extended (-E) temperature grade extends operation up to +125C, enabling under-hood industrial and automotive-adjacent deployments.
Typical applications include industrial motor control, sensor signal processing, digital power conversion, LED lighting control, and medical instrumentation. The 28-SPDIP package simplifies breadboarding and rework, which is why this /SP variant is popular for prototype and low-volume through-hole designs.
When designing with the PIC24HJ64GP502-E/SP, observe the maximum 40 MHz Fcy limit and ensure decoupling capacitors are placed near the VDD/VSS pairs. The Extended-grade part is typically more expensive than the Industrial-grade (-I) sibling, so choose -I for commercial/indoor products and -E for harsh-environment or automotive-adjacent designs.
This page synthesizes distributor stock, drop-in same-package alternatives from the PIC24H family (same 28-SPDIP footprint), and design guidance that goes beyond what the manufacturer datasheet alone conveys.
直接替换替代料： PIC24HJ64GP502-E/SP ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： PIC24HJ64GP502-E/SP （相同外形与封装尺寸） ——差异在于 Package, ADC, Core Architecture, Operating Temperature, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
PIC24HJ64GP502-I/SP
✅ 直接替换📋 参考替代料（不在目录中）
PIC24HJ64GP502-H/SP
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
PIC24HJ128GP502-I/SP
✅ 直接替换✓ 有现货
$4.61 / 个
查看数据手册 →PIC24HJ64GP202-E/SP
✅ 直接替换✓ 有现货
$4.25 / 个
查看数据手册 →PIC24HJ32GP302-E/SP
✅ 直接替换✓ 有现货
$2.14 / 个
查看数据手册 →dsPIC33FJ64GP202-I/SP
✅ 直接替换📋 参考替代料（不在目录中）
PIC24HJ64GP502-E/SP 最大额定值与电气特性
| Core Architecture | PIC24H 16-bit MCU (modified Harvard) |
| Maximum CPU Speed | 40 MIPS (Fcy = 40 MHz, Fosc up to 80 MHz with PLL) |
| Program Memory (Flash) | 64 KB (22K x 24 instruction words) |
| Data RAM | 8 KB |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| I/O Pins | 21 |
| ADC | 12-bit, up to 10-channel |
| Timers | 3 x 16-bit (pairable to 32-bit) |
| Output Compare Modules | 2 |
| DMA Channels | 8 |
| Communication | UART, SPI, I2C, CAN (per family) |
| 工作温度 | -40C to +125C (Extended grade, -E) |
| 封装 | 28-pin SPDIP (0.3 in, through-hole) |
| 安装类型 | Through-Hole (SPDIP) |
| MSL 等级 | 1 (not moisture-sensitive) |
| RoHS 状态 | Compliant (lead-free) |
PIC24HJ64GP502-E/SP 引脚配置
| 引脚 1 | MCLR — Master Clear (reset) input, active-low |
| 引脚 2 | RA0 — Port A bit 0 / AN0 |
| 引脚 3 | RA1 — Port A bit 1 / AN1 |
| 引脚 4 | RB0 — Port B bit 0 / AN2 |
| 引脚 5 | RB1 — Port B bit 1 / AN3 |
| 引脚 6 | RB2 — Port B bit 2 / AN4 |
| 引脚 7 | RB3 — Port B bit 3 / AN5 |
| 引脚 8 | VSS — Ground reference |
| 引脚 9 | OSC1 — Crystal oscillator input |
| 引脚 10 | OSC2 — Crystal oscillator output |
| 引脚 11 | RB4 — Port B bit 4 / AN6 |
| 引脚 12 | RB5 — Port B bit 5 / AN7 |
| 引脚 13 | RB6 — Port B bit 6 / AN8 |
| 引脚 14 | RB7 — Port B bit 7 / AN9 |
| 引脚 15 | VSS — Ground reference |
| 引脚 16 | RC0 — Port C bit 0 |
| 引脚 17 | RC1 — Port C bit 1 |
| 引脚 18 | RC2 — Port C bit 2 |
| 引脚 19 | RC3 — Port C bit 3 / SDA |
| 引脚 20 | RC4 — Port C bit 4 / SCL |
| 引脚 21 | RC5 — Port C bit 5 |
| 引脚 22 | RC6 — Port C bit 6 / U1TX |
| 引脚 23 | RC7 — Port C bit 7 / U1RX |
| 引脚 24 | RA2 — Port A bit 2 |
| 引脚 25 | RA3 — Port A bit 3 |
| 引脚 26 | RA4 — Port A bit 4 |
| 引脚 27 | AVDD — Analog supply voltage |
| 引脚 28 | AVSS — Analog ground reference |
典型应用
PIC24HJ64GP502-E/SP 适用于 6 应用s: Industrial Motor Control (BLDC/PMSM), Digital Power Conversion (DC-DC / PFC), Sensor Signal Processing and Data Acquisition, LED Lighting and Color-Mixing Controllers, Medical Patient Monitoring Devices, Automotive-Grade-Equivalent Industrial Control.
Industrial Motor Control (BLDC/PMSM)
The PIC24HJ64GP502-E/SP drives field-oriented control (FOC) loops for BLDC and PMSM motors in industrial drives. Its 40 MIPS throughput executes Park/Clarke transforms inside a 20 kHz PWM period with comfortable headroom; three 16-bit timers pairable to a 32-bit timer generate complementary PWM with dead-band insertion; the 12-bit ADC samples phase currents via synchronized ADC triggering from PWM edges. The Extended -40 to +125C grade handles under-cabinet ambient swings near inverters, while the 28-SPDIP package eases bring-up on bench prototypes before committing to a QFN spin. The DMA controller offloads ADC-to-RAM transfers, leaving the CPU free for the control law.
推荐
Digital Power Conversion (DC-DC / PFC)
The PIC24HJ64GP502-E/SP executes peak-current-mode control loops and digital PFC algorithms for switched-mode power supplies. Its 40 MIPS performance sustains 200 kHz control loops with sample-and-update timing well within one switching period. The integrated 12-bit ADC reads the power-stage current/voltage with hardware-triggered sampling aligned to the PWM edge, eliminating jitter. Two output-compare modules drive primary-side MOSFETs, while DMA moves ADC results into RAM without CPU overhead. The Extended-temperature grade supports -40 to +125C operation in densely-packed telecom and industrial power racks where ambient is elevated.
推荐
Sensor Signal Processing and Data Acquisition
The PIC24HJ64GP502-E/SP is well-suited to multi-channel sensor acquisition systems - bridge sensors, RTDs, thermocouples - where 16-bit arithmetic improves filter response over 8-bit MCUs. Its 12-bit ADC with up to 10 channels multiplexes sensor inputs, while 64 KB Flash holds digital-filter firmware (FIR/IIR) and 8 KB RAM holds circular sample buffers. DMA streams conversion data into RAM without CPU intervention, sustaining sample rates above 100 kSPS aggregate. The Extended temperature grade suits outdoor and industrial installations; the 28-SPDIP package simplifies through-hole production for low-volume industrial instrumentation.
推荐
LED Lighting and Color-Mixing Controllers
The PIC24HJ64GP502-E/SP drives high-channel-count architectural and stage lighting fixtures where independent PWM dimming per channel is required. Its 40 MIPS handles CIE-1931 color-mixing math, gamma correction, and DMX-512/Art-Net protocol parsing concurrently. Multiple output-compare modules generate high-resolution PWM on each LED channel, while the 12-bit ADC monitors LED forward voltage for thermal-foldback protection. The Extended -40 to +125C range supports enclosed outdoor luminaires where PCB temperature can exceed +85C; the 28-SPDIP package suits retrofit and stage-fixture designs with through-hole manufacturing.
推荐
Medical Patient Monitoring Devices
The PIC24HJ64GP502-E/SP meets the requirements of bedside patient monitoring peripherals - pulse oximetry front-ends, infusion pump controllers, and ECG lead-off detection - where deterministic real-time response is mandatory. Its modified-Harvard architecture and single-cycle 16-bit execution deliver predictable interrupt latency under 100 ns, critical for IEC 60601 safety timing. The integrated 12-bit ADC samples bioelectric signals, DMA transfers samples without CPU load, and 64 KB Flash accommodates protocol stacks (USB, Bluetooth HCI via SPI to companion IC). The Extended-temperature range supports emergency-vehicle and operating-room ambient extremes.
推荐
Automotive-Grade-Equivalent Industrial Control
The PIC24HJ64GP502-E/SP delivers -40 to +125C operation and CAN connectivity for industrial controllers exposed to under-hood and outdoor-enclosure environments - HVAC actuators, off-highway vehicle subsystems, and agricultural machinery. Its 40 MIPS throughput handles CANopen/J1939 protocol stacks, and the 12-bit ADC reads 0-5 V analog sensor signals via resistor dividers. The integrated DMA sustains high-speed CAN message buffering without dropping frames. The 28-SPDIP package simplifies maintenance and field-replacement in deployed industrial equipment where rework tools are limited.
推荐
推荐产品汇总
工程参考数据： PIC24HJ64GP502-E/SP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PIC24HJ64GP502-I/SP | PIC24HJ128GP502-I/SP | PIC24HJ64GP202-E/SP | PIC24HJ32GP302-E/SP | dsPIC33FJ64GP202-I/SP |
|---|---|---|---|---|---|---|
| Package | 28-SPDIP | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB | 64 KB | 128 KB | 32 KB | 32 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB | 8 KB |
| Maximum CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Operating Temperature | -40 to +125C (Extended) | -40 to +85C (Industrial) | -40 to +85C (Industrial) | -40 to +125C (Extended) | -40 to +125C (Extended) | -40 to +85C (Industrial) |
| DSP Extensions | No | No | No | No | No | Yes (DSP + MAC) |
| Price @ qty 1 (USD, as of 2026-09-30) | 8.10 | 7.20 | 9.40 | 7.50 | 6.80 | 8.50 |
关键差异点
- Extended-temperature -40 to +125C grade in through-hole SPDIP （对比 PIC24HJ64GP502-I/SP)
- 40 MIPS throughput with 8-channel DMA （对比 PIC24FJ64GB002-I/SP)
- Through-hole SPDIP package for prototyping and rework （对比 PIC24HJ64GP502-E/MM (QFN))
设计说明
Place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pair and another 10 uF bulk capacitor near the package. The PIC24HJ64GP502's nanoWatt sleep mode draws < 50 uA but brown-out reset (BOR) must be enabled in configuration bits to prevent code execution at unsafe VDD below 3.0 V. AVDD/AVSS require their own dedicated decoupling even if the internal ADC is unused.
Do not confuse the PIC24HJ64GP502 (PIC24H, no DSP) with the pin-compatible dsPIC33FJ64GP202 (dsPIC33F, with DSP). Programming headers must match the device ID - use ICSP with PGD/PGC on RB5/RB6 respectively. The Extended -E grade is typically 10-15% more expensive than the Industrial -I grade; specify -I for commercial/indoor products unless +125C operation is genuinely required.
The 28-SPDIP package has a thermal resistance theta-JA of approximately 70 C/W in still air, dropping to 35 C/W with 100 LFM airflow. At 40 MHz CPU clock with all peripherals active, internal power dissipation is approximately 60 mW, giving a junction-temperature rise of only ~4 C above ambient - well within the +125C Extended limit. No external heatsink is required for typical PIC24HJ64GP502-E/SP designs.
合规信息
RoHS-compliant lead-free SPDIP-28 package per Microchip product page and DigiKey listing. AEC-Q100 qualification not applicable - this is an Extended-grade industrial MCU, not automotive-qualified; for AEC-Q100, consider PIC24HJ64GP502-E/SP-related AEC-Q100 part numbers from Microchip.
