S912XEQ512J2MAA - 16-bit 50MHz 512KB MCU | NXP | Automotive (Tape & Reel)
料号： S912XEQ512J2MAA ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.4 | $114.00 |
| 100 | $10.2 | $1,020.00 |
| 500 | $9.35 | $4,675.00 |
| 1,000 | $8.6 | $8,600.00 |
S912XEQ512J2MAA 概述
A 16-bit microcontroller (MCU) is a single-chip computer whose ALU and registers process data 16 bits at a time. Within the embedded hierarchy, the MCU sits below 32-bit application processors and above 8-bit controllers, making 16-bit parts ideal for real-time control tasks such as body electronics, motor control, and instrumentation where deterministic interrupt latency matters more than raw throughput.
Key features of the S912XEQ512J2MAA include the enhanced S12X core with an XGATE co-processor concept for offloading interrupt handling, 512KB of on-chip Flash program memory, and 50 MHz bus-domain performance. Supply operation spans 1.8V/2.8V/5V domains per Arrow product data, supporting mixed-voltage automotive designs. The device is shipped in Tape & Reel (T/R) packing for automated assembly.
Technically, the HCS12X architecture is an evolution of Freescale (now NXP) proven HC12 family, adding an orthogonal instruction set, enhanced timing and communication peripherals, and automotive-grade process qualification. Flash endurance and retention are specified in the manufacturer datasheet for lifetime in-vehicle reprogramming scenarios.
Typical applications include automotive body control modules, gateway nodes, HVAC blowers, seat and mirror control, instrument clusters, and industrial controllers requiring CAN/LIN connectivity with high Flash density. The 80-QFP 14x14 footprint suits cost-sensitive 2-layer and 4-layer boards.
Design consideration: budget the 50 MHz core against Flash wait states and verify the J2 temperature ordering (-40/+125C) against your under-hood placement; PCB land pattern must match the 0.5 mm-pitch 80-QFP footprint per the datasheet mechanical drawing.
This page synthesizes distributor pricing tiers, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： S912XEQ512J2MAA ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： S912XEQ512J2MAA （相同外形与封装尺寸） ——差异在于 Operating Temperature, Package, Connectivity, EEPROM Size, Flash Memory.
快速对比工具——选择替代料号进行并排对比：
S912XET512J2VAGR
✅ 直接替换✓ 有现货
$1 / 个
查看数据手册 →S912XEG384J2VAL
✅ 直接替换✓ 有现货
$17.8 / 个
查看数据手册 →S912XEG256J2CAL
✅ 直接替换✓ 有现货
$15.4 / 个
查看数据手册 →MC9S12XDT512MAA
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →MC9S12XA256CAAR
✅ 直接替换✓ 有现货
$9.95 / 个
查看数据手册 →S912XEQ512J2MAA 最大额定值与电气特性
| Core Processor | HCS12X (S12X) |
| Core Size | 16-bit |
| 最大时钟频率 | 50 MHz |
| Flash Memory | 512KB (512K x 8) |
| 电源电压 | 1.8V / 2.8V / 5V |
| 工作温度 | -40C to +125C |
| 封装 | 80-QFP (14x14 mm), PQFP-80 |
| 安装类型 | Surface Mount |
| Qualification | Automotive AEC-Q100 Qualified |
| Packaging | Tape & Reel (T/R) |
| Lifecycle Stage | Active |
| Terminal Form | Gull Wing |
| Terminal Count | 80 |
S912XEQ512J2MAA 80-qfp (14x14 mm), pqfp-80 引脚配置指南
S912XEQ512J2MAA（80-qfp (14x14 mm), pqfp-80 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： S912XEQ512J2MAA.
请参阅 数据手册 以查看完整引脚配置。
典型应用
S912XEQ512J2MAA 适用于 6 应用s: Automotive Body Control Module, Vehicle Gateway / Network Node, HVAC Blower and Climate Control, Instrument Cluster, Seat and Mirror Control Modules, Industrial Control and Legacy S12X Retrofit.
Automotive Body Control Module
The S912XEQ512J2MAA fits body control modules (BCM) because its 16-bit S12X core at 50 MHz delivers deterministic real-time response for lamp, door, and wiper load management, while 512KB Flash accommodates OEM feature code, diagnostics (UDS/KWP), and calibration data without external memory. In a BCM the MCU drives high-side/low-side driver ICs and reads switch matrices through port pins, with the XGATE-style peripheral offload keeping interrupt latency predictable for PWM dimming and debouncing. Its AEC-Q100 -40C to +125C rating covers cabin and engine-bay-adjacent modules. The 5V-tolerant I/O simplifies direct interfacing with 12V-conditioned automotive signals, reducing component count versus mixed-voltage 32-bit solutions.
推荐
Vehicle Gateway / Network Node
As a network gateway node, the S912XEQ512J2MAA leverages the S12X family's on-chip CAN and serial communication peripherals to bridge multiple CAN/LIN buses in a vehicle. The 512KB Flash stores protocol stacks, routing tables, and diagnostic handlers, while the 50 MHz core keeps message-forwarding jitter low even under interrupt storms. The 80-QFP 14x14 package provides enough I/O for dual transceiver interfaces plus status GPIO. Because gateways run continuously, the automotive -40C to +125C qualification and Flash endurance ratings from the NXP family datasheet matter; pair with an SBC providing watchdog and CAN wake for a robust node that meets OEM sleep-current budgets.
推荐
HVAC Blower and Climate Control
Climate control units benefit from the S912XEQ512J2MAA's combination of 512KB Flash for look-up tables and control firmware, and the S12X core's fast, deterministic PWM generation for blower motor drive and stepper-based blend-door actuation. The -40C to +125C AEC-Q100 grade covers under-dash and plenum-mounted electronics exposed to thermal cycling. Analog multiplexed I/O on the S12X handles temperature sensor (NTC) reading, while the 5V I/O domain drives actuator H-bridges via gate drivers. Compared with a 32-bit solution, the 16-bit part meets the control-loop math requirements at lower cost and simpler EMC-friendly layout on the 14x14 mm QFP footprint.
推荐
Instrument Cluster
Entry-level and mid-range instrument clusters use the S912XEQ512J2MAA to read vehicle-speed and engine signals, drive stepper-motor gauge pointers, and manage telltale LEDs. The 50 MHz S12X core supplies the timing precision needed for smooth pointer sweeps, and 512KB Flash holds display logic, CAN/LIN stacks, and per-variant calibration sets - key for platform clusters reused across trims. The 80-QFP provides adequate I/O for keypads, backlight PWM, and buzzer outputs. Its AEC-Q100 qualification and -40C to +125C range address the cluster's cabin/firewall thermal environment, and the established HCS12X toolchain (CodeWarrior) shortens firmware development for legacy-cluster upgrades.
推荐
Seat and Mirror Control Modules
Seat adjustment and power-fold mirror modules require many I/O, moderate processing, and automotive qualification - a profile matching the S912XEQ512J2MAA exactly. The 80-pin QFP exposes sufficient port pins to drive multiple DC-motor H-bridges and read Hall-effect or current-sense feedback channels, while the 50 MHz core handles position counting, stall detection, and LIN/CAN messaging concurrently. The 512KB Flash supports position-memory tables and diagnostic flash (DTC) storage. The -40C to +125C AEC-Q100 rating suits door-mounted electronics, and the S12X family's low run and wait currents help meet module quiescent-current targets when the vehicle is parked.
推荐
Industrial Control and Legacy S12X Retrofit
Beyond automotive, the S912XEQ512J2MAA serves industrial controllers and legacy HCS12X retrofits where code reuse dominates the bill of materials. Existing S12X firmware ports with minimal changes, and the 512KB Flash plus 50 MHz performance headroom absorb added features such as Modbus or CANopen stacks. The -40C to +125C industrial-grade envelope covers unconditioned cabinets, and the 5V I/O domain interfaces directly with legacy PLC-style signaling. Designers should verify industrial-standard conformity (e.g., EMC immunity) at the system level, as the AEC-Q100 rating addresses the die qualification but not the end-equipment standard. The 14x14 mm QFP simplifies two-layer control boards.
推荐
推荐产品汇总
工程参考数据： S912XEQ512J2MAA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | S912XET512J2VAGR | S912XEG384J2VAL | S912XEG256J2CAL | MC9S12XDT512MAA | MC9S12XA256CAAR |
|---|---|---|---|---|---|---|
| Package | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same | 80-QFP-class - verify footprint |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Frequency | S12X 16-bit, 50 MHz | S12X 16-bit, 50 MHz | S12X 16-bit, 50 MHz | S12X 16-bit, 50 MHz | S12XD 16-bit, 50 MHz | S12XA 16-bit, 50 MHz |
| Flash Memory | 512KB | 512KB | 384KB | 256KB | 512KB | 256KB |
| Family / Peripheral Set | S12XE | S12XE (ET variant) | S12XE (EG variant) | S12XE (EG variant) | S12XD | S12XA |
关键差异点
- Maximum 512KB Flash density with 80-pin footprint （对比 S912XEG384J2VAL)
- Full -40C to +125C automotive grade （对比 S912XEG256J2CAL)
- S12XE enhanced peripheral set over legacy XD family （对比 MC9S12XDT512MAA)
设计说明
The S912XEQ512J2MAA operates with 1.8V/2.8V/5V supply domains per Arrow product data. Use a dedicated automotive system basis chip (e.g., NXP MC33989 class SBC) to sequence the 5V main domain and provide reset supervision and CAN wake. Estimated: at 50 MHz the S12X core draws in the tens-of-mA range on 5V (per family datasheet run-current figures); budget the module quiescent target by exploiting WAIT/STOP modes, which are essential for OEM sleep-current specs of typically <100 uA per module.
The 80-QFP 14x14 mm footprint has gull-wing terminals at a fine pitch; follow the mechanical drawing in the NXP family datasheet for the land pattern and use solder-mask-defined or non-solder-mask-defined pads per IPC guidance validated by your assembly house. Place the 0.1 uF decoupling capacitor within 2 mm of each VDD/VSS pair, and add bulk 10 uF at the regulator output. Keep the oscillator traces short and guarded by ground for EMC robustness in automotive EMC testing.
Do not confuse ordering-code suffixes: 'J2' fixes the 80-pin QFP package and the '-40/+125C' grade here, but sibling suffixes change both package pin count and temperature rating (e.g., J3V is a 112-pin, -40/+105C part). Verify the exact suffix on incoming reels. Also confirm Flash programming voltage and erase/write endurance limits from the family datasheet before implementing in-field reprogramming, and check that your CodeWarrior/PEMicro debugger version supports the S12XE family header files.
合规信息
Automotive AEC-Q100 qualification confirmed by Arrow and Mouser listings. RoHS/REACH/lead-free status not stated in the provided web data - confirm on NXP product page.
