SP3232EBCT-L/TR - 2/2 RS-232 Transceiver, 3-5.5V | MaxLinear
料号: SP3232EBCT-L/TR ✓ 量产中SP3232EBCT-L/TR 概述
An RS-232 transceiver is a physical-layer interface IC that converts between digital logic levels and the voltage-defined RS-232 interface used for serial communications. The SP3232EB family combines two transmit channels, two receive channels, on-chip level translation, and a charge-pump voltage source for the bipolar RS-232 signal. This places it in the hierarchy of interface ICs, transceiver ICs, serial-interface ICs, and semiconductor devices.
The SP3232EBCT-L/TR operates from +3.0 V to +5.5 V and can therefore be powered from common 3.3 V or 5 V system rails. Its stated 250 kbps transmission rate under load is suitable for moderate-speed data links, configuration interfaces, instrumentation, and embedded control links. The 16-SOIC package allows direct use of a familiar surface-mount footprint and simplifies assembly where a larger quad-channel RS-232 device is unnecessary.
The internal charge-pump supply generates the positive and negative voltages required by true RS-232 drivers. According to the MaxLinear product page, the SP3222EB/SP3232EB series uses only 0.1 uF charge-pump capacitors in 3.3 V operation. A dual-channel architecture can also reduce the number of external interface ICs compared with a quad transceiver, although signal-routing and channel-count requirements still determine the final choice.
Typical applications include portable data terminals, hand-held test equipment, industrial control modules, point-of-sale equipment, and embedded serial adapters. The integrated level translation allows a low-voltage controller to communicate with a conventional RS-232 host while keeping the external power-supply design relatively simple.
Designers should follow the manufacturer’s recommended charge-pump capacitor values, place them close to the associated pins, and observe the external capacitor requirements of the transmitter and receiver network. PCB layout should keep the RS-232 connector and interface traces away from sensitive analog or high-speed digital paths. The maximum cable length, termination, grounding, and protection arrangement should be selected for the intended communication standard and operating environment.
This product summary combines the manufacturer family specifications with practical application, package, and replacement guidance. It also highlights the distinctions that matter when evaluating the SP3232EBCT-L/TR against other dual RS-232 transceivers.
直接替换替代料: SP3232EBCT-L/TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: SP3232EBCT-L/TR (相同外形与封装尺寸) ——差异在于 Package, Operating Temperature, Product Type, Supply Voltage Range, Maximum Data Rate.
SP3232EEN-L/TR
✅ 直接替换联系询价
查看数据手册 →SP3232EEY-L/TR
✅ 直接替换联系询价
查看数据手册 →SP3232ECT-L/TR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →SP3232EET-L/TR
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →ST3232ECWR
✅ 直接替换📋 参考替代料(不在目录中)
SP3232EBCT-L/TR 规格参数
| Product Type | 2/2 RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | +3.0 V to +5.5 V |
| Maximum Transmission Rate | 250 kbps under load |
| Protocol | RS-232 |
| Compliance Standard | EIA/TIA-232-F |
| ESD Protection, Human Body Model | +15 kV |
| ESD Protection, IEC 61000-4-2 Air Discharge | +15 kV |
| ESD Protection, IEC 61000-4-2 Contact Discharge | +8 kV |
| Charge-Pump Capacitor Value at 3.3 V | 0.1 uF |
| 封装 | 16-SOIC |
| Package Body Width | 7.50 mm |
| Packaging | Tube |
| 安装类型 | Surface mount |
| Low-Power Shutdown Current | 1 uA with receivers active on SP3222EB |
| Interoperability Supply Lower Limit | +2.7 V |
SP3232EBCT-L/TR 7.50 mm 引脚配置指南
SP3232EBCT-L/TR(7.50 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: SP3232EBCT-L/TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SP3232EBCT-L/TR 适用于 6 应用s: Portable RS-232 Data Terminals, Industrial Control Modules, Point-of-Sale Equipment, Instrumentation and Test Equipment, Embedded Serial Adapters, Networking and Communications Equipment.
Portable RS-232 Data Terminals
The SP3232EBCT-L/TR fits portable and hand-held equipment that needs two RS-232 communication channels without a separate level translator. Its +3.0 V to +5.5 V operating range allows use with a 3.3 V system rail, while the 250 kbps under-load rate covers common configuration and control links. The two-driver, two-receiver arrangement reduces the number of interface ICs compared with a quad-channel device. A practical implementation places the transceiver beside the connector, follows the manufacturer’s 0.1 uF charge-pump capacitor guidance for 3.3 V operation, and routes the RS-232 traces away from sensitive circuitry.
推荐
Industrial Control Modules
The SP3232EBCT-L/TR is appropriate for industrial modules that exchange commands or status data with an RS-232 master. Two drivers and two receivers support two logical links while the single +3.0 V to +5.5 V supply simplifies integration with 3.3 V or 5 V control electronics. The 250 kbps maximum rate is suitable for moderate-speed supervisory traffic rather than high-bandwidth protocols. Industrial implementations should add appropriate connector-side protection and verify grounding, cable length, and noise margins under the expected electromagnetic environment.
推荐
Point-of-Sale Equipment
The SP3232EBCT-L/TR can provide two RS-232 channels for peripherals such as a receipt printer, scanner, customer display, or weighing interface. Its two transmit and two receive paths give the equipment designer more flexibility than a single-channel transceiver while retaining a compact 16-SOIC footprint. The device operates directly from +3.0 V to +5.5 V, and the 250 kbps under-load rating is appropriate for transactional serial traffic. Follow the manufacturer capacitor and grounding guidance, and place external protection where cables can be exposed to user-accessible connectors.
推荐
Instrumentation and Test Equipment
The SP3232EBCT-L/TR is useful in portable and bench instrumentation that communicates with legacy RS-232 test equipment. Its two bidirectional interface paths can support a control channel and a status or measurement channel, while the low-voltage supply operation reduces the number of power rails required by the instrument. The 250 kbps under-load capability is suitable for command and data-transfer functions that do not require continuous high-rate streaming. Validate the complete channel with the intended cable and instrument because capacitance, grounding, and driver loading can affect the usable distance.
推荐
Embedded Serial Adapters
The SP3232EBCT-L/TR is well suited to small adapters that bridge a modern low-voltage controller to two conventional RS-232 ports. Its single-supply range of +3.0 V to +5.5 V allows the adapter to operate from 3.3 V or 5 V logic rails, and the integrated charge pump removes the need for a separate bipolar RS-232 supply. The 16-SOIC package supports compact assembly. Designers should follow the exact charge-pump capacitor connections, include the required interface-network components, and provide connector-side protection if the adapter will be field-installed.
推荐
Networking and Communications Equipment
The SP3232EBCT-L/TR can support low-speed management or service interfaces on communications equipment that retains an RS-232 port. Two transmit and two receive channels allow concurrent command and diagnostic functions, while the 250 kbps under-load rating fits supervisory protocols. Its 3.0 V to 5.5 V operation is useful in systems using mixed digital rails. In network equipment, maintain a defined grounding strategy, keep transceiver charge-pump loops compact, and verify EMC and ESD performance at the external connector rather than assuming on-chip ratings eliminate the need for system protection.
推荐
推荐产品汇总
工程参考数据: SP3232EBCT-L/TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SP3232EEN-L/TR | SP3232EEY-L/TR | SP3232ECT-L/TR | SP3232EET-L/TR | ST3232ECWR |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | MaxLinear | Exar Corporation | Exar Corporation | Exar Corporation | Exar Corporation | STMicroelectronics |
| Transceiver Configuration | 2/2 | 2/2 SP3232EB family | 2/2 SP3232EB family | 2/2 SP3232EB family | 2/2 SP3232EB family | 2/2 |
关键差异点
- Two full-duplex RS-232 channels in one 16-SOIC device (对比 ST3232ECWR)
- Operation from a single +3.0 V to +5.5 V supply (对比 SP3232EEN-L/TR)
- Specified 250 kbps transmission rate under load (对比 SP3232EEY-L/TR)
- Enhanced system-facing ESD ratings (对比 SP3232ECT-L/TR)
设计说明
Place the charge-pump capacitors close to their designated SP3232EBCT-L/TR pins and use the capacitance and tolerance specified by the manufacturer for the selected supply voltage. Keep the high-current charge-pump loop compact to reduce radiated and conducted emissions. Place the interface components near the associated driver or receiver pins, and route connector-side protection components directly to the appropriate ground reference.
Do not substitute a related SP3232EB ordering code solely because the family name matches. Confirm the package drawing, pin functions, temperature grade, supply limits, data rate, and ESD ratings for every suffix. In particular, an apparently equivalent 16-SOIC transceiver can differ in receiver fail-safe behavior or operating-temperature limits, so a production substitution requires a complete electrical comparison.
Keep the RS-232 connector and cable entry away from sensitive analog sections and high-speed digital clocks. Provide a solid ground reference, route the interface as a differential-ish bipolar pair according to the system’s grounding strategy, and avoid long unprotected stubs. If the port is user-accessible, use external protection because the device’s specified ESD capability does not eliminate connector-side system requirements.
Separate the charge-pump area from precision measurement circuits and place input, receiver, and charge-pump decoupling according to the manufacturer layout guidance. Avoid connecting transient or surge current directly through the logic ground path. For compact boards, verify the 16-SOIC body width of 7.50 mm and the complete land pattern, including lead pitch and solder mask clearance, before releasing artwork.
合规信息
The family documentation references EIA/TIA-232-F and IEC 61000-4-2 ESD test levels. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not confirmed for this exact ordering code.