SPC560D40L3 - 32-bit MCU, 1.5MB Flash, 64MHz | STMicroelectronics
料号： SPC560D40L3 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.25 | $112.50 |
| 100 | $10 | $1,000.00 |
| 500 | $9 | $4,500.00 |
| 1,000 | $8.1 | $8,100.00 |
SPC560D40L3 概述
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The SPC560D40L3 belongs to the SPC56 family of automotive microcontrollers, which are part of the broader Power Architecture portfolio. These MCUs are optimized for real-time control, safety-critical applications, and harsh environments, offering a balance of performance, power efficiency, and reliability.
Key features of the SPC560D40L3 include a 64 MHz e200z0h core, 1.5 MB flash memory, 96 KB RAM, and a rich set of peripherals such as multiple CAN, LIN, SPI, and I2C interfaces. It also includes advanced timers, ADCs, and a flexible memory protection unit. The device supports a wide operating voltage range of 3.3V to 5V and is designed for extended temperature ranges from -40°C to +125°C, making it ideal for under-the-hood automotive applications.
Technically, the SPC560D40L3 is built on a 90nm process technology, offering a good balance of performance and power consumption. The e200z0h core is a single-issue, 32-bit Power Architecture core with a five-stage pipeline, providing efficient execution of control algorithms. The MCU includes a memory protection unit (MPU) and a cyclic redundancy check (CRC) unit for enhanced safety and data integrity. It also features a fail-safe clock monitor and a watchdog timer to ensure reliable operation in safety-critical systems.
Typical applications include engine control units (ECUs), transmission control, body control modules, and industrial automation. The SPC560D40L3 is particularly well-suited for automotive body electronics, where its robust communication interfaces and low-power modes are essential. In industrial settings, it can be used for motor control, PLCs, and process control systems.
When designing with the SPC560D40L3, it is important to consider proper decoupling of the power supply pins and careful layout of the crystal oscillator circuit. The device supports multiple low-power modes, which can be leveraged to reduce overall system power consumption. Additionally, the flash memory can be programmed in-circuit, simplifying firmware updates in the field.
直接替换替代料： SPC560D40L3 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： SPC560D40L3 （相同外形与封装尺寸） ——差异在于 Timers, AEC-Q100, Flash Memory, Package, ADC.
快速对比工具——选择替代料号进行并排对比：
SPC560D40L1
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$8.1 / 个
查看数据手册 →SPC560D40L3B
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
MPC5604B
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
SPC560D40L3 最大额定值与电气特性
| Core | e200z0h (Power Architecture) |
| Maximum Frequency | 64 MHz |
| Flash Memory | 1.5 MB |
| RAM | 96 KB |
| 封装 | LQFP-100 |
| Operating Voltage | 3.3V to 5V |
| 工作温度 | -40°C to +125°C |
| CAN Interfaces | 3 (FlexCAN) |
| LIN Interfaces | 2 |
| SPI Interfaces | 3 |
| I2C Interfaces | 1 |
| ADC Channels | 16 (12-bit) |
| Timers | eMIOS (24 channels) |
| RoHS 状态 | Compliant |
| AEC-Q100 | Qualified |
SPC560D40L3 引脚配置
| 引脚 1 | VDD — Digital power supply |
| 引脚 2 | VSS — Digital ground |
| 引脚 3 | P0 — General purpose I/O |
| 引脚 4 | P1 — General purpose I/O |
| 引脚 5 | P2 — General purpose I/O |
| 引脚 6 | P3 — General purpose I/O |
| 引脚 7 | P4 — General purpose I/O |
| 引脚 8 | P5 — General purpose I/O |
| 引脚 9 | P6 — General purpose I/O |
| 引脚 10 | P7 — General purpose I/O |
| 引脚 11 | VDD_HV — High voltage power supply |
| 引脚 12 | VSS_HV — High voltage ground |
典型应用
SPC560D40L3 适用于 6 应用s: Engine Control Unit (ECU), Body Control Module (BCM), Industrial Motor Control, Automotive Gateway, Industrial Automation PLC, Medical Device Control.
Engine Control Unit (ECU)
The SPC560D40L3 is ideal for engine control units due to its high-speed 64 MHz core, 1.5 MB flash for complex algorithms, and multiple CAN interfaces for vehicle networking. Its AEC-Q100 qualification ensures reliability in harsh automotive environments. The MCU's advanced timers and ADCs enable precise fuel injection and ignition timing control. In a typical ECU, the SPC560D40L3 reads sensor inputs, executes control loops, and communicates with other ECUs via CAN. Its low-power modes help reduce battery drain when the engine is off. The wide operating temperature range (-40°C to +125°C) ensures operation under hood. Compared to lower-end MCUs, the SPC560D40L3 provides the performance headroom needed for future software updates.
推荐
Body Control Module (BCM)
The SPC560D40L3 is well-suited for body control modules, which manage lighting, windows, locks, and other comfort features. Its multiple LIN interfaces allow connection to smart actuators and sensors. The MCU's low-power modes are critical for reducing quiescent current when the vehicle is parked. The 1.5 MB flash provides ample storage for body control algorithms and calibration data. In a BCM, the SPC560D40L3 communicates with door modules, seat controls, and lighting systems via LIN and CAN. Its robust I/O and ESD protection ensure reliable operation in the vehicle's electrical environment. The device's AEC-Q100 qualification guarantees long-term reliability. Compared to general-purpose MCUs, the SPC560D40L3 offers automotive-specific features like fail-safe clock monitoring and a watchdog timer.
推荐
Industrial Motor Control
The SPC560D40L3 is used in industrial motor control for its real-time performance and rich peripheral set. The e200z0h core at 64 MHz executes control loops efficiently, while the 12-bit ADC and eMIOS timers provide precise feedback and PWM generation. The MCU supports various motor types, including BLDC, PMSM, and AC induction motors. In a typical motor drive, the SPC560D40L3 reads current and position sensors, computes the control algorithm, and generates PWM signals to the inverter. Its multiple communication interfaces allow integration with PLCs and HMI systems. The device's wide operating temperature range and robust design make it suitable for factory automation. Compared to DSPs, the SPC560D40L3 offers a balance of performance and ease of use for motor control applications.
推荐
Automotive Gateway
The SPC560D40L3 serves as an automotive gateway, routing data between different vehicle networks. Its three CAN interfaces and two LIN interfaces allow it to bridge multiple buses. The MCU's 1.5 MB flash can store routing tables and diagnostic data. In a gateway application, the SPC560D40L3 receives messages from one network and forwards them to another, ensuring data integrity and security. Its high-speed core handles message filtering and routing with low latency. The device's fail-safe features, such as the watchdog timer and clock monitor, ensure reliable operation. The AEC-Q100 qualification makes it suitable for automotive use. Compared to dedicated gateway ICs, the SPC560D40L3 offers flexibility and programmability.
推荐
Industrial Automation PLC
The SPC560D40L3 is used in programmable logic controllers (PLCs) for industrial automation. Its multiple communication interfaces (CAN, SPI, I2C) allow connection to various field devices. The MCU's real-time performance ensures deterministic execution of control logic. In a PLC, the SPC560D40L3 scans inputs, executes user programs, and updates outputs. Its 1.5 MB flash can store complex ladder logic and function blocks. The device's wide operating temperature range and robust design make it suitable for factory floors. Compared to general-purpose MCUs, the SPC560D40L3 offers enhanced reliability and safety features. Its low-power modes help reduce energy consumption in always-on systems.
推荐
Medical Device Control
The SPC560D40L3 is suitable for medical devices that require reliable real-time control, such as infusion pumps and patient monitors. Its high-speed core and rich peripherals enable precise control of motors, sensors, and displays. The MCU's low-power modes are essential for battery-powered devices. In a medical device, the SPC560D40L3 manages user interfaces, sensor data acquisition, and actuator control. Its robust design and wide temperature range ensure reliable operation. The device's safety features, such as the watchdog timer and memory protection, are critical for patient safety. Compared to consumer-grade MCUs, the SPC560D40L3 offers higher reliability and longer product life. Its AEC-Q100 qualification, while automotive-focused, indicates high manufacturing quality.
推荐
推荐产品汇总
工程参考数据： SPC560D40L3 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SPC560D40L1 | SPC560D40L3B | MPC5604B |
|---|---|---|---|---|
| Package | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors |
| Core | e200z0h | e200z0h | e200z0h | e200z0h |
| Maximum Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
| Flash Memory | 1.5 MB | 1 MB | 1.5 MB | 1 MB |
| RAM | 96 KB | 64 KB | 96 KB | 64 KB |
| CAN Interfaces | 3 | 3 | 3 | 3 |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
关键差异点
- Higher memory capacity （对比 SPC560D40L1)
- Automotive-grade reliability （对比 MPC5604B)
- Same package and pinout as L1 （对比 SPC560D40L1)
设计说明
Ensure proper decoupling of VDD and VDD_HV pins with 100nF ceramic capacitors placed as close to the pins as possible. Use a 10uF bulk capacitor on the main power rail. The device operates from 3.3V to 5V, so verify the supply voltage is within this range under all load conditions.
For the crystal oscillator circuit, place the crystal and load capacitors close to the OSC pins to minimize parasitic capacitance and ensure stable startup. Use a ground plane under the MCU to reduce noise and improve EMC performance.
Do not exceed the absolute maximum ratings for VDD and VDD_HV. Ensure the reset pin is properly pulled up and that the watchdog timer is configured correctly to avoid unintended resets. When programming flash, follow the recommended sequence to prevent corruption.
合规信息
RoHS compliant and AEC-Q100 qualified per STMicroelectronics product page.
