STB-GP - RT1850/RT1860 Panel | Analog Devices | Telecom
料号： STB-GP ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $69.6681 | $69.67 |
| 10 | $73.2624 | $732.62 |
| 100 | $146.99 | $14,699.00 |
| 500 | $146.99 | $73,495.00 |
| 1,000 | $146.99 | $146,990.00 |
STB-GP 概述
A specialized interface IC or panel is used to connect, route, adapt, or terminate signals within a larger telecom, networking, or embedded system. The STB-GP listing connects this item with RT1850 and RT1860, which are identified by the source data as related assemblies, but the exact electrical role, signal directions, connector arrangement, and supported system configuration are not provided. Engineers should therefore confirm the system revision and board connector before ordering or substituting it.
The available commercial evidence indicates availability rather than a complete technical datasheet. LCSC lists STB-GP as in stock with a starting price of $69.6681, eBee lists a starting price of $73.2624, and Rochester/FPGACenter lists a starting unit price of $146.99 with volume discounts for quantities of 10, 100, 500, and 1,000. Prices are reproduced as reported and may change without notice as of 2026-10-23. Octopart also lists Analog Devices STB-GP and directs buyers to compare bulk pricing and availability.
Because the verified sources do not specify package dimensions, pin count, mounting type, operating temperature, voltage, current, RoHS, REACH, or automotive qualification, this page does not invent those values. The procurement-critical decision is compatibility with the intended RT1850/RT1860 assembly, not an assumed generic IC replacement. Request the current Analog Devices or Rochester Electronics documentation, mechanical drawing, and revision information before using the part in a new design.
This page combines verified distributor identity, reported pricing, lifecycle information, sourcing links, and explicit data gaps. It is intended to help engineers identify STB-GP quickly while preventing unsupported assumptions about electrical compatibility, package fit, or drop-in replacement.
直接替换替代料： STB-GP ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
STB-GP 规格参数
| Manufacturer | Analog Devices |
| Manufacturer Description | PANEL FOR RT1850 RT1860 |
| 分类 | Integrated Circuits (ICs), Interface, Specialized |
| Product Status | Active |
| 生命周期状态 | Active |
| Source Classification | Specialized interface component |
STB-GP standard 引脚配置指南
STB-GP（standard 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： STB-GP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STB-GP 适用于 6 应用s: RT1850 Telecom Equipment Panel, RT1860 Telecom Equipment Panel, Telecom Interface Card Repair, Legacy Network Equipment Maintenance, Specialized Interface Assembly Integration, Telecom Test and Measurement Fixture.
RT1850 Telecom Equipment Panel
The STB-GP is specifically identified by the verified listings as a panel for RT1850, making it most relevant to equipment or service assemblies built around that platform. Its fit depends on the exact RT1850 hardware revision, connector arrangement, and board or chassis documentation, because the supplied data does not define electrical ratings or a pinout. Before installation, compare the panel mechanically and verify every connection against the original service schematic. The part should not be treated as a generic interchangeable IC because its verified identity is tied to a specific equipment family rather than a published general-purpose interface standard.
推荐
RT1860 Telecom Equipment Panel
STB-GP is also described as a panel for RT1860, so it may be relevant to repair, maintenance, or replication of equipment using that platform. The supplied evidence confirms the association but does not provide signal names, connector pinouts, voltage levels, impedance, or environmental limits. Engineers should obtain the RT1860 assembly documentation and compare the replacement panel’s connectors, mounting points, cable routing, and revision identifiers. This is a service-oriented application where traceability and exact mechanical fit are more important than general interface-category similarity.
推荐
Telecom Interface Card Repair
For repair inventories, STB-GP can be considered when the original equipment documentation identifies the same RT1850 or RT1860 panel and the replacement matches the mechanical and electrical interfaces. The verified distributor pages report active or in-stock status, which can help maintenance teams locate supply, but they do not provide a replacement cross-reference or testing procedure. Inspect connector condition, verify continuity and insulation, confirm shield grounding, and compare the assembly revision before installation. Do not substitute based solely on the phrase “interface IC” in a distributor category.
推荐
Legacy Network Equipment Maintenance
STB-GP may support maintenance of legacy telecom equipment where an RT1850 or RT1860 panel is still deployed and the original documentation is available. The verified Rochester listing reports the item as active production, but it does not confirm obsolescence policy, revision availability, or long-term supply commitments. A maintenance design should therefore record the exact STB-GP marking, distributor source, date code, and test results. Confirm connector pinouts and cable shield arrangements before installation, and preserve the removed assembly for failure analysis when replacing a field unit.
推荐
Specialized Interface Assembly Integration
The catalog classification places STB-GP among Interface and Specialized ICs, so it may be used in an equipment assembly that requires the documented RT1850/RT1860 panel function. The verified data does not establish protocol support, power requirements, signal levels, or environmental qualification. System integrators should treat the component as an assembly-specific item rather than a conventional interchangeable IC. Obtain assembly drawings, electrical schematics, connector definitions, and service instructions from the equipment manufacturer. If those documents are unavailable, the part should not be approved for a safety- or mission-critical design.
推荐
Telecom Test and Measurement Fixture
A test fixture for RT1850 or RT1860 equipment may use STB-GP when reproducing the original panel interface and connector arrangement. Since the verified sources provide no pinout, impedance, signal timing, or electrical limits, fixture design cannot rely on generic interface assumptions. Engineers should derive the fixture from the original equipment documentation, then verify continuity, power levels, grounding, and signal behavior under representative loads. Treat the available distributor price as sourcing information only, and document all substitutions or test adapters so that maintenance results remain traceable.
推荐
推荐产品汇总
工程参考数据： STB-GP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STB-GP |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Manufacturer Description | PANEL FOR RT1850 RT1860 | PANEL FOR RT1850 RT1860 |
| Category | Interface, Specialized | Interface, Specialized |
| Lifecycle Status | Active | Active |
| LCSC Starting Price | $69.6681 | $69.6681 |
| eBee Starting Price | $73.2624 | $73.2624 |
| Rochester Starting Price | $146.99 | $146.99 |
| Related Assemblies | RT1850 and RT1860 | RT1850 and RT1860 |
关键差异点
- Equipment-specific RT1850 and RT1860 association （对比 Generic interface ICs)
- Reported active lifecycle status （对比 Obsolete or unavailable legacy panel listings)
- Multiple reported sourcing channels （对比 Single-source procurement)
- Catalog identity is panel-oriented （对比 Conventional packaged interface semiconductors)
设计说明
Do not install STB-GP solely because a distributor labels it an Interface IC. The verified description ties it to RT1850 and RT1860 panels, while package, pinout, interface, and electrical data are unavailable. Confirm the original equipment part number, board revision, connector geometry, signal assignments, voltage, and grounding before ordering or applying power.
Obtain the original RT1850/RT1860 schematic and connector drawings before assigning any signal function. Verify continuity, return paths, shielding, impedance-sensitive nets, and protection polarity after installation. Because no verified impedance, timing, or logic-level information is available, do not infer signal integrity from the catalog category or use a generic interface IC as a reference.
Treat STB-GP as an assembly-specific mechanical item until the manufacturer drawing is obtained. Compare mounting holes, connector locations, panel thickness, cable exits, keep-out areas, and chassis clearances against the removed assembly. A package symbol or pin layout must not be created from assumptions; if the item is a panel rather than a conventional IC, its mechanical interface is the primary design constraint.
Distributor prices are not guaranteed quotations and can change with inventory, quantity, date code, and sourcing channel. The reported prices are $69.6681 at LCSC, $73.2624 at eBee, and $146.99 through Rochester/FPGACenter as of 2026-10-23. Confirm stock, authorized status, traceability, packaging, delivery, and return terms in writing before using STB-GP in production.
合规信息
No compliance declarations were included in the verified web data. Compliance may depend on the complete panel or assembly rather than the individual STB-GP designation.
