STM32F107VCT7 - 72MHz 256KB MCU | STMicroelectronics
料号: STM32F107VCT7 ✓ 量产中STM32F107VCT7 概述
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one device. The STM32F107VCT7 provides the architecture hierarchy ARM Cortex-M3 core → 32-bit microcontroller → embedded system controller. Its connectivity-oriented feature set allows it to serve as the central controller for Ethernet-connected equipment, USB peripherals, industrial controllers, and human-machine-interface equipment rather than serving only as a simple sensor processor.
The device operates at 72 MHz and includes 256 KB of Flash for firmware, 64 KB of SRAM for working data, USB OTG, and an Ethernet MAC. Its 100-LQFP package provides 100 electrical pins in a compact 14 x 14 mm surface-mount footprint. The STM32F107VCT7 therefore supports connected embedded designs requiring substantially more I/O and program storage than small 8-bit or 32-pin microcontroller families.
The STM32F107VC family uses a 32-bit ARM Cortex-M3 RISC core and combines USB OTG with Ethernet connectivity. The C density designation corresponds to 256 KB of Flash, while the T7 order code identifies the specified temperature-grade variant. Designers should use the manufacturer’s pin-description table and reference manual when assigning alternate-function signals because the complete peripheral multiplexing and alternate-function mapping extend beyond the basic package outline.
Typical uses include industrial Ethernet gateways, USB-to-Ethernet equipment, network-control modules, embedded data-acquisition systems, and compact industrial controllers. In these applications, the Ethernet MAC and USB OTG interfaces reduce the need for external communication controllers, while 256 KB of Flash provides room for networking stacks, control logic, diagnostics, and application firmware.
A key design consideration is power and signal-integrity implementation. Place decoupling capacitors close to the supply pins, route Ethernet differential pairs according to the manufacturer’s layout guidance, and provide a clean low-impedance ground path. Firmware, peripheral configuration, pin multiplexing, and operating conditions should be validated against the manufacturer’s device documentation before production release.
This page combines the exact order-code specifications with package guidance, interface-focused application analysis, verified drop-in options, and practical engineering notes. It is designed to help engineers identify whether the STM32F107VCT7’s combination of 72 MHz processing, 256 KB Flash, USB OTG, Ethernet, and 100-pin LQFP packaging fits a connected embedded-control design.
直接替换替代料: STM32F107VCT7 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32F107VCT7 (相同外形与封装尺寸) ——差异在于 Package, Core, Flash Memory, Supply Voltage, Timers.
STM32F107VCT6
✅ 直接替换联系询价
查看数据手册 →STM32F107VCT7 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 64 KB |
| Ethernet Interface | Ethernet MAC |
| USB Interface | USB OTG |
| 电源电压 | 2.5 V / 3.3 V |
| 封装 | 100-pin LQFP (14 x 14 mm) |
| 引脚数量 | 100 pins |
| 安装类型 | Surface mount |
| Manufacturer Product Family | STM32F105xx and STM32F107xx connectivity line |
STM32F107VCT7 100-pin lqfp (14 x 14 mm) 引脚配置指南
STM32F107VCT7(100-pin lqfp (14 x 14 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32F107VCT7.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32F107VCT7 适用于 6 应用s: Industrial Ethernet Gateway, USB-to-Ethernet Connectivity Module, USB-C Peripheral Controller, Industrial Data-Acquisition System, Network-Control and HMI Module, Connected Embedded Control Platform.
Industrial Ethernet Gateway
The STM32F107VCT7 is well suited to an industrial Ethernet gateway because it combines a 72 MHz ARM Cortex-M3 core, 256 KB of Flash, 64 KB of SRAM, and an Ethernet MAC in one 100-pin LQFP device. The processor can handle protocol processing, local control, diagnostics, and configuration tasks while USB OTG provides an additional service or maintenance connection. The Ethernet physical layer still needs to be implemented separately, and the board should use controlled-impedance differential routing and a properly designed isolation strategy. Compared with a small low-pin-count MCU, this device provides substantially more communication capability and general-purpose I/O without requiring a second controller solely for Ethernet.
推荐
USB-to-Ethernet Connectivity Module
The STM32F107VCT7 can serve as the main controller in a USB-to-Ethernet connectivity module because USB OTG and Ethernet are both integrated into the MCU. Its 72 MHz Cortex-M3 core provides capacity for USB and network protocol handling, while 256 KB of Flash can hold firmware, descriptors, and protocol code. The 64 KB SRAM supports stack state, packet buffers, and transient data. A production design must still include an Ethernet transceiver, magnetics or magnetics-integrated circuitry, connector protection, and careful separation between communications and power domains. Firmware validation should cover USB enumeration, network timing, recovery behavior, and simultaneous bus activity.
推荐
USB-C Peripheral Controller
For a USB-C peripheral controller, the STM32F107VCT7 provides a 72 MHz processing core, USB OTG, 256 KB of program memory, and 64 KB of working RAM within a single 100-pin LQFP package. These resources are suitable for device enumeration, configuration storage, status reporting, and user-interface logic. The USB data path requires careful connector, ESD, impedance, and routing decisions, while the MCU’s supply rails need local high-frequency decoupling. Engineers should confirm the selected USB connector’s current direction and role requirements, validate suspend and resume behavior, and use the manufacturer’s USB electrical and firmware guidance before releasing the design.
推荐
Industrial Data-Acquisition System
The STM32F107VCT7 fits compact data-acquisition equipment that must sample local signals, manage storage or communications, and provide Ethernet or USB connectivity. Its 100-pin LQFP package offers more peripheral connections than compact 32-pin MCUs, while the 72 MHz core supports time-critical sampling, filtering, and control tasks. The 256 KB Flash and 64 KB SRAM are adequate for embedded firmware, calibration data, working buffers, and communication stacks. Analog front-end design remains independent of the MCU, so the system should separate sensitive measurement paths from switching supplies and Ethernet signals. Conversion latency, sampling synchronization, input protection, and calibration strategy should be verified at the complete system level.
推荐
Network-Control and HMI Module
The STM32F107VCT7 is appropriate for a network-control module or human-machine interface that combines local control with Ethernet communication. Its 100-pin package provides the pin count needed for buttons, indicators, displays, communications, and expansion signals, and its 72 MHz core leaves performance headroom for a graphical or menu-driven interface alongside network tasks. USB OTG can support service access, configuration export, or peripheral connectivity. Designers should partition display and switching-power signals from Ethernet, maintain short return paths, and validate boot time and interrupt responsiveness. The MCU’s 256 KB Flash should be monitored when firmware includes a display stack, fonts, bootloader, and network services.
推荐
Connected Embedded Control Platform
The STM32F107VCT7 can act as the central controller in a connected embedded platform that links local sensors and actuators to Ethernet or USB infrastructure. Its 72 MHz Cortex-M3 core handles real-time control, the 256 KB Flash supports application and communications firmware, and the 64 KB SRAM provides space for protocol stacks and working buffers. The broad 100-pin LQFP interface simplifies access to peripheral I/O compared with smaller packages, although it also increases routing complexity and board area. A robust design should include local bulk and high-frequency decoupling, defined reset and boot behavior, watchdog-based fault recovery, and tested firmware update paths. Field functionality should be confirmed across power-up, network disconnection, and peripheral fault conditions.
推荐
推荐产品汇总
工程参考数据: STM32F107VCT7 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32F107VCT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) - same |
| Core | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 72 MHz | 72 MHz |
| Flash Memory | 256 KB | 256 KB |
| SRAM | 64 KB | 64 KB |
| Ethernet Interface | Ethernet MAC | Ethernet MAC |
| USB Interface | USB OTG | USB OTG |
| Order-Code Temperature Grade | T7 | T6 |
关键差异点
- Maintains the same complete order-code hardware configuration (对比 STM32F107VCT6)
- Combines Ethernet, USB OTG, and substantial memory in one controller (对比 STM32F105VCT7)
- Provides 100 pins for connected embedded-control designs (对比 GD32F103 variants)
设计说明
Use the manufacturer’s 100-pin LQFP land pattern and pin-1 orientation exactly. Place every supply decoupling capacitor close to its associated power pin, with the shortest possible ground return and minimal loop area. The STM32F107VCT7 combines Ethernet, USB, and high-speed digital signaling, so supply and return paths should be planned before fan-out. Avoid routing Ethernet or USB signals beneath the MCU unless the reference design explicitly permits it, and preserve adequate copper around thermal and power-distribution structures.
Treat USB and Ethernet as controlled-impedance interfaces rather than ordinary low-speed logic routes. Follow the manufacturer’s reference layout for Ethernet differential pairs, including pair symmetry, continuous reference planes, connector placement, and return-path continuity. USB routing should use the device guidance for differential impedance and ESD-protection placement. Keep switching regulators, inductors, and high-current paths spatially separated from communication nets, and verify the complete stack-up before fabrication rather than relying on geometric approximation alone.
Confirm the exact operating-voltage conditions and external component values from the manufacturer documentation for the STM32F107VC configuration. The product listing identifies 2.5 V and 3.3 V operation, but the complete design must also satisfy each supply rail’s timing, tolerance, sequencing, and current requirements. Fit local bulk capacitance for load transients and separate high-frequency bypass from bulk-energy storage. Account for the total load of the MCU, communications circuitry, external memories, and attached peripherals rather than sizing the supply only for the controller.
Do not treat an STM32F105-family part as a drop-in substitute merely because both devices use a Cortex-M3 core and similar Flash capacity. Ethernet availability, USB implementation, package size, pin multiplexing, and peripheral assignments must match the target board. For the documented STM32F107VCT6 alternative, verify the T6 temperature grade against the product’s ambient requirements and review related errata. Firmware should also be tested for startup, clock configuration, Ethernet recovery, USB suspend/resume, and peripheral initialization.
合规信息
The manufacturer product page and component listings do not state the requested compliance results. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation for the exact order code and current manufacturing status.