STM32F429NIH7 - 180MHz Cortex-M4 2MB MCU | STMicroelectronics
料号： STM32F429NIH7 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $17.1359 | $17.14 |
| 10 | $17.1359 | $171.36 |
| 100 | $17.1359 | $1,713.59 |
| 500 | $17.1359 | $8,567.95 |
| 1,000 | $17.1359 | $17,135.90 |
STM32F429NIH7 概述
A microcontroller is a compact embedded-computing semiconductor that integrates a CPU core, Flash program memory, RAM, peripherals, and interface controllers on one package. The STM32F4 family belongs to the embedded processor hierarchy of ARM Cortex-M MCUs, where the Cortex-M4 core combines deterministic real-time execution with floating-point and digital signal-processing support. This makes the STM32F429NIH7 suitable for control, communications, multimedia, and industrial automation systems.
The device provides 225 DMIPS at 180 MHz according to the cited technical features, along with an ART Accelerator that supports 0-wait-state execution from Flash memory. Its ARM Cortex-M4 core includes an FPU, memory protection capability, and DSP instructions. The verified product data identifies 2 MB of Flash memory organized as 2M x 8, while detailed RAM organization, voltage range, and peripheral assignments were not included in the supplied excerpts.
The STM32F429NIH7 is suitable for industrial control systems, networking equipment, audio and multimedia controllers, motor-control platforms, and high-speed data acquisition. Its 180 MHz processing capability can reduce control-loop latency and support more demanding protocol handling than lower-frequency general-purpose microcontrollers. The 2 MB Flash capacity also provides room for firmware, boot code, configuration data, and embedded assets.
Designers should verify the exact pin functions, exposed-ball assignments, power rails, decoupling requirements, and startup behavior against the manufacturer datasheet before layout. Because this is a 216-ball BGA package, PCB design requires careful ball assignment, via-in-pad or compatible escape-routing strategy, and assembly-process verification. Differential pairs and high-speed interfaces should follow the manufacturer’s recommended layout and impedance guidance.
This page consolidates verified distributor pricing, manufacturer product information, package identity, and engineering-focused application guidance. It also distinguishes confirmed specifications from unavailable data so engineers can make sourcing and design decisions without assuming unverified electrical details.
直接替换替代料： STM32F429NIH7 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： STM32F429NIH7 （相同外形与封装尺寸） ——差异在于 Flash Memory, Mounting Type, Package.
快速对比工具——选择替代料号进行并排对比：
该产品暂无直接替换替代料。
请求替代料STM32F429NIH7 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| CPU Core | ARM Cortex-M4 with FPU |
| Maximum CPU Frequency | 180 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 2 MB (2M x 8) |
| Performance | 225 DMIPS at 180 MHz |
| DSP Support | DSP instructions |
| Memory Protection | MPU supported |
| ART Accelerator | 0-wait-state Flash execution |
| 封装 | 216-TFBGA, 13 mm x 13 mm |
| 安装类型 | Surface mount |
| 引脚数量 | 216 balls |
| Manufacturer Product Family | STM32F429xx |
STM32F429NIH7 216-tfbga, 13 mm x 13 mm 引脚配置指南
STM32F429NIH7（216-tfbga, 13 mm x 13 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： STM32F429NIH7.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32F429NIH7 适用于 6 应用s: Industrial Control and Automation, Networking and Communications Equipment, Audio and Multimedia Control, Motor Control and Power Systems, Data Acquisition and Embedded Signal Processing, High-Speed Embedded Networking Gateway.
Industrial Control and Automation
The STM32F429NIH7 fits industrial controllers that need a fast control loop, substantial Flash space, and deterministic embedded processing. Its ARM Cortex-M4 core operates up to 180 MHz and provides FPU and DSP instructions, which can help execute control algorithms, manage multiple I/O tasks, and process machine data. The 2 MB Flash capacity supports application firmware, diagnostics, configuration data, and protocol stacks. The 216-TFBGA package requires careful BGA layout and assembly planning.
推荐
Networking and Communications Equipment
The STM32F429NIH7 is appropriate for communications equipment requiring a high-performance 180 MHz Cortex-M4 core and 2 MB of Flash for protocol firmware. Its DSP instructions and FPU can assist with packet handling, signal processing, and data transformations, while the MPU supports memory isolation in more complex embedded systems. The supplied data does not confirm Ethernet, USB, or specific transceiver interfaces, so those requirements must be checked in the manufacturer datasheet.
推荐
Audio and Multimedia Control
The STM32F429NIH7 can serve as the control processor in audio or multimedia systems where real-time computation, FPU support, and DSP instructions are valuable. Its 180 MHz core can manage control tasks and signal-processing workloads, while 2 MB of Flash provides storage for firmware and embedded control logic. The exact audio interfaces, sampling rates, and external codec support are not confirmed in the supplied excerpts and must be verified before selecting the device.
推荐
Motor Control and Power Systems
The STM32F429NIH7 can be evaluated for motor-control and power-system controllers where computational headroom improves algorithm execution and timing margins. The Cortex-M4 FPU and DSP instructions support common digital filtering and control techniques, while the 180 MHz operating frequency enables more responsive task scheduling. External power-stage characteristics, timers, ADC, motor-control peripherals, and safety requirements are not available in the supplied data and must be checked in the datasheet.
推荐
Data Acquisition and Embedded Signal Processing
The STM32F429NIH7 is a candidate for embedded data-acquisition systems that need more processing capability than a basic microcontroller. Its 180 MHz Cortex-M4 core, FPU, DSP instructions, and MPU can support filtering, calibration, and real-time data preparation. The supplied web results do not confirm ADC resolution, sampling rate, conversion time, or external interface assignments, so acquisition requirements must be validated against the full manufacturer documentation before design commitment.
推荐
High-Speed Embedded Networking Gateway
The STM32F429NIH7 can be used in gateway equipment that combines protocol management, local control, and data transformation in one embedded processor. Its 2 MB Flash capacity provides meaningful firmware space, and the Cortex-M4 architecture supports real-time task execution at up to 180 MHz. A gateway design still requires validation of memory availability, boot requirements, network peripherals, security requirements, and package-level routing; those specifications were not present in the supplied excerpts.
推荐
推荐产品汇总
工程参考数据： STM32F429NIH7 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 216-TFBGA (13 mm x 13 mm) |
| Brand | STMicroelectronics |
| CPU Core | ARM Cortex-M4 with FPU |
| Maximum Frequency | 180 MHz |
| Flash Memory | 2 MB (2M x 8) |
| Performance | 225 DMIPS at 180 MHz |
| DSP Instructions | Supported |
| Memory Protection Unit | Supported |
关键差异点
- Higher verified processing performance （对比 STM32F439NIH6)
- Large verified Flash configuration （对比 STM32F746NEH6)
- Integrated Cortex-M4 compute features （对比 STM32F746NEH6)
设计说明
Because the STM32F429NIH7 uses a 216-TFBGA package, begin PCB layout from the manufacturer’s exact ball map and recommended land pattern. Confirm ball functions, power balls, ground connections, and exposed thermal requirements before routing. Avoid relying on generic BGA assumptions; the supplied excerpts identify the package and dimensions but do not provide the complete 216-ball assignment.
Validate the complete power-supply requirements from the official datasheet before placing decoupling or selecting a regulator. The verified excerpts do not provide the STM32F429NIH7 supply-voltage range, current limits, or internal rail sequencing. Use the manufacturer’s recommended voltage tolerances and decoupling values rather than estimating them from the 180 MHz CPU frequency or 2 MB Flash specification.
For high-speed communication or memory-related interfaces, preserve the manufacturer-recommended topology, reference-plane continuity, impedance, and routing lengths. The available data confirms a 180 MHz Cortex-M4 core and 216-TFBGA package, but it does not identify all peripheral pin functions or interface constraints. Review the full datasheet before enabling high-speed signals or assigning differential pairs.
Estimate junction temperature from actual processor activity, supply voltage, core frequency, and the package thermal model after obtaining the missing operating and thermal data. The verified material does not provide thermal resistance or maximum junction temperature, so no dissipation calculation should be presented as a datasheet value. Board copper, thermal vias, and enclosure airflow should be evaluated using the manufacturer’s application guidance.
合规信息
The supplied verified results identify STM32F429NIH7 as an STMicroelectronics 216-TFBGA Cortex-M4 microcontroller, but they do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.
