STM32F446ZEJ6TR - 180MHz Cortex-M4 MCU 512KB Flash UFBGA-144 | STMicroelectronics
料号： STM32F446ZEJ6TR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $11.2 | $11.20 |
| 10 | $9.95 | $99.50 |
| 100 | $8.62 | $862.00 |
| 500 | $7.49 | $3,745.00 |
| 1,000 | $6.65 | $6,650.00 |
STM32F446ZEJ6TR 概述
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and programmable peripherals. The STM32 family is built on the ARM Cortex-M architecture; the Cortex-M4 specifically adds single-precision floating-point unit (FPU) and DSP instructions, making it suitable for signal-processing tasks. The STM32F4 line sits at the high-performance tier of the STM32 portfolio, above Cortex-M0/M0+ entry parts and below Cortex-M7 lines, and is widely used as a system controller in industrial, audio, motor, and consumer designs.
Key features of the STM32F446ZEJ6TR include: a Chrom-ART Accelerator for fast 2D graphics, two dedicated audio PLLs (I2S / SAI), a 12-bit ADC (2.4 MSPS), two 12-bit DACs, three I2C, four USART/UART, three SPI, two CAN 2.0B, USB 2.0 Full-Speed and USB 2.0 High-Speed with on-chip PHY, SDMMC, Quad-SPI, FMC for external SDRAM/NOR/NAND, and an integrated RTC with calendar. The UFBGA-144 package exposes 114 GPIO, three 16-bit timers plus one 32-bit timer, and 12-channel DMA.
Architecturally, the part uses a multi-AHB bus matrix with separate bridges for SRAM and Flash, giving it the throughput to drive external SDRAM and TFT displays without wait states. The on-chip PHY for USB HS removes the need for an external ULPI transceiver, shrinking BOM cost.
Typical applications: digital audio systems, USB audio interfaces, motor control (FOC / six-step), industrial PLCs, point-of-sale terminals, and high-speed USB peripherals. For designs requiring flexible audio and USB with deterministic real-time performance, the STM32F446ZEJ6TR provides a strong balance of peripherals, memory, and MHz.
When laying out the UFBGA-144, use 0.8 mm-pitch escape routing and at least 4-layer stack-up with a continuous ground plane. Decouple each VDD pin with 100 nF + 4.7 uF ceramic capacitors placed within 1-2 mm of the ball, and reserve an optional ferrite bead on VDDA. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： STM32F446ZEJ6TR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： STM32F446ZEJ6TR （相同外形与封装尺寸） ——差异在于 Package, Core, ADC, Flash Organization, Timers.
快速对比工具——选择替代料号进行并排对比：
STM32F446ZEJ6
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →STM32F446ZET6
✅ 直接替换✓ 有现货
$6.0455 / 个
查看数据手册 →STM32F446ZET6TR
✅ 直接替换📋 参考替代料（不在目录中）
STM32F446ZEH6TR
✅ 直接替换📋 参考替代料（不在目录中）
STM32F446ZCH6
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →STM32F446ZEJ6TR 最大额定值与电气特性
| Core | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 180 MHz |
| CoreMark / DMIPS | 608 CoreMark / 225 DMIPS |
| Program Memory (Flash) | 512 KB |
| SRAM | 128 KB |
| Supply Voltage (VDD) | 1.7 V to 3.6 V |
| 工作温度 | -40 C to +85 C (grade 6) |
| 封装 | 144-ball UFBGA, 10x10 mm, 0.8 mm pitch |
| GPIO Count | 114 |
| ADC | 3x 12-bit, 2.4 MSPS |
| DAC | 2x 12-bit |
| Timers | 10 general-purpose 16-bit, 2 32-bit, low-power, SysTick |
| DMA Channels | 16 (2x 8-stream DMA controllers) |
| Communication Interfaces | USB FS, USB HS w/ on-chip PHY, 3x SPI, 3x I2C, 4x USART/UART, 2x CAN 2.0B, SDMMC, SAI, Quad-SPI |
| External Memory Bus | FMC (SDRAM, NOR, NAND, PSRAM) |
| RoHS 状态 | Compliant |
| MSL 等级 | 3 (168 hours) |
STM32F446ZEJ6TR 144-ball ufbga, 10x10 mm, 0.8 mm pitch 引脚配置指南
STM32F446ZEJ6TR（144-ball ufbga, 10x10 mm, 0.8 mm pitch 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： STM32F446ZEJ6TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32F446ZEJ6TR 适用于 6 应用s: USB Audio Interface (Class Compliant), Field-Oriented Control (FOC) Motor Drive, Industrial PLC / HMI Controller, USB-to-UART / USB-to-SPI Bridge Device, Portable Data Acquisition / Logging System, Point-of-Sale (POS) Terminal / Barcode Scanner.
USB Audio Interface (Class Compliant)
The STM32F446ZEJ6TR's 180 MHz Cortex-M4 with FPU plus integrated USB 2.0 High-Speed on-chip PHY and dual dedicated audio PLLs (I2S/SAI) make it a strong host for USB Audio Class 1.0/2.0 interfaces, headphone DACs, and USB microphones. The 128 KB SRAM provides 4x audio sample buffers at 192 kHz / 24-bit without DMA underrun, while the 512 KB dual-bank Flash supports field-upgradeable firmware via DFU. Compared to F0-class Cortex-M0 USB devices, the F4 adds deterministic interrupt latency critical for isochronous USB audio streams.
推荐
Field-Oriented Control (FOC) Motor Drive
The 180 MHz Cortex-M4 with single-precision FPU and DSP extensions runs FOC algorithms on a 3-phase PMSM or BLDC motor at 20+ kHz PWM without CPU saturation. Three 12-bit ADCs sampled at 2.4 MSPS capture phase currents with sub-microsecond latency, and the 16-bit advanced timers produce center-aligned PWM with hardware dead-time insertion. The 512 KB Flash stores full state-space controllers and speed-loop firmware, while the FMC bus connects to external SDRAM for data logging.
推荐
Industrial PLC / HMI Controller
The STM32F446ZEJ6TR's combination of CAN 2.0B (2x), USB HS, RS-485-capable UARTs (4x), and a 2.4 MSPS 12-bit ADC suits it for compact industrial PLCs, distributed I/O nodes, and small HMI panels. The 144-ball UFBGA exposes 114 GPIO to drive keypads, character or TFT displays, and digital I/O. The Cortex-M4 DSP extensions accelerate PLC instruction scans and floating-point PID loops, and the dedicated RTC with calendar handles timestamped event logging.
推荐
USB-to-UART / USB-to-SPI Bridge Device
The on-chip USB HS PHY plus 4x USART and 3x SPI make the STM32F446ZEJ6TR a high-performance USB-to-serial bridge, replacing FTDI-class parts with an open-source ST firmware stack. The 180 MHz core sustains 12 Mbps USB bulk throughput with negligible CPU load, freeing 70%+ of CPU for protocol conversion. The 512 KB Flash stores multi-protocol translation tables, while the RTC and watchdog timers support unattended industrial deployments.
推荐
Portable Data Acquisition / Logging System
With 3x 12-bit ADCs at 2.4 MSPS, 128 KB SRAM, and an SDMMC host, the STM32F446ZEJ6TR can stream multi-channel analog data directly to a microSD card at 1 MSPS aggregate sample rate. The 1.7 V to 3.6 V VDD range supports direct Li-ion battery operation, and the low-power Run, Sleep, and Stop modes extend battery life to multi-month standby. The Quad-SPI interface allows high-speed serial Flash expansion for long-duration log files.
推荐
Point-of-Sale (POS) Terminal / Barcode Scanner
The STM32F446ZEJ6TR's USB HS host, 2x CAN, multiple UARTs, and TFT-capable FMC bus fit a compact POS terminal that drives a 480x272 LCD, a 1D/2D barcode imager, an EMV card reader, and a receipt printer. The Cortex-M4 DSP extensions accelerate AES-256 encryption for PCI PIN transactions, and the dedicated RTC timestamps every transaction. The 144-ball UFBGA provides the 100+ GPIO such a system needs without external I/O expanders.
推荐
推荐产品汇总
工程参考数据： STM32F446ZEJ6TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32F446ZEJ6 | STM32F446ZET6 | STM32F446ZET6TR | STM32F446ZEH6TR | STM32F446ZCH6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | UFBGA-144 (10x10 mm) | UFBGA-144 - same | UFBGA-144 - same | UFBGA-144 - same | UFBGA-144 - same | UFBGA-144 - same |
| Core / Frequency | Cortex-M4F / 180 MHz | Cortex-M4F / 180 MHz | Cortex-M4F / 180 MHz | Cortex-M4F / 180 MHz | Cortex-M4F / 180 MHz | Cortex-M4F / 180 MHz |
| Flash / SRAM | 512 KB / 128 KB | 512 KB / 128 KB | 512 KB / 128 KB | 512 KB / 128 KB | 512 KB / 128 KB | 256 KB / 128 KB (-50% Flash) |
| Operating Temperature | -40 C to +85 C (grade 6) | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| USB HS on-chip PHY | Yes | Yes | Yes | Yes | Yes | Yes |
| Shipping Medium | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tray |
关键差异点
- Best-in-class Cortex-M4 frequency at 180 MHz with on-chip USB HS PHY （对比 STM32F446ZCH6)
- Production-ready Tape & Reel packaging （对比 STM32F446ZEJ6)
- Dual dedicated audio PLLs (I2S/SAI) and Chrom-ART accelerator （对比 STM32F407IGH6)
设计说明
The 144-ball UFBGA at 0.8 mm pitch demands 4-layer PCB with HDI microvia-in-pad. Place 100 nF + 4.7 uF ceramic decoupling pairs within 1-2 mm of every VDD/VSS ball pair. Provide a continuous uninterrupted ground plane directly under the package to minimise ground bounce on the high-speed USB HS signals; reference ST AN4013 (STM32F4 PCB design guidelines) for the full decoupling and stack-up checklist.
The USB HS PHY and PLL blocks are noise-sensitive. Power VDDA from a dedicated ferrite bead plus 2.2 uF + 100 nF + 10 nF capacitor network, isolated from the noisy digital VDD. A bulk 10 uF + 100 nF pair on each VDD pin set is also recommended. Do not power VDDA directly from the same rail as the I/O bank; the resulting digital switching noise on VDDA will degrade ADC SNR and USB HS eye performance.
Estimated: total package thermal dissipation is dominated by the CPU core. With theta_JA around 30 C/W for a 4-layer JEDEC board at 180 MHz, the part is fine for most applications, but adding a small copper pour under the central ball array reduces junction temperature by 10-15 C. Always configure the unused balls per ST AN4013 - leaving them floating can create antenna effects on the SDRAM bus.
合规信息
RoHS and REACH compliant per ST product page. Not AEC-Q100 qualified - use STM32F446 grade 7 variant for automotive. Halogen-free status not stated in verified data.
