STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
料号： STM32F767IIT6 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $17.92 | $17.92 |
| 10 | $16.13 | $161.30 |
| 100 | $14.49 | $1,449.00 |
| 500 | $13.21 | $6,605.00 |
| 1,000 | $11.95 | $11,950.00 |
STM32F767IIT6 概述
An ARM Cortex-M7 microcontroller (MCU) is a 32-bit processor core designed for high-performance, deterministic embedded applications such as motor control, audio processing, and industrial networking. The Cortex-M7 sits at the top of the Cortex-M family, above Cortex-M4/M33, in the broader taxonomy of microcontrollers -> embedded processors -> semiconductors. It adds dual-issue pipeline, tightly-coupled memory, and SIMD DSP instructions while retaining the deterministic interrupt response that made Cortex-M ubiquitous in real-time designs.
Key features of the STM32F767IIT6 include integrated crypto/hash peripherals (AES, SHA, MD5, HMAC), a TFT LCD controller, a JPEG codec, two USB OTG controllers (FS + HS with PHY), two CAN 2.0B interfaces, an Ethernet MAC, an SDMMC interface, three I2C, six SPI (two with I2S), four USART plus two UART, and 12-bit ADC/DAC blocks. Chrom-ART (DMA2D) acceleration and the proprietary Chrom-GRC graphics functions simplify TFT GUI development.
Architecturally, the part pairs the Cortex-M7 core with a multi-AHB bus matrix, dual-bank Flash for safe field updates, and a flexible low-power run/sleep/stop/standby/shutdown power profile. Internal regulators plus VBAT domain preserve RTC and backup registers during main-rail loss, and four PWM-capable 16-bit timers plus two 32-bit timers support complex motor-control or digital-power topologies.
Typical applications include HMI panels with TFT LCD, industrial PLCs and inverters, audio processing and codec bridging, secure IoT gateways, and USB-based peripherals or test instruments. The wide peripheral mix makes it a single-chip solution for products that previously required an MPU plus external peripherals.
When designing with this MCU, allocate PCB area for LQFP-176 fanout and provide bulk decoupling on each VDDS/VDD pair. Use ST's STM32CubeMX to generate pin mux and clock-tree configurations and validate trace routing for the parallel TFT interface if used.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet, giving engineers a single reference for sourcing and design validation.
直接替换替代料： STM32F767IIT6 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： STM32F767IIT6 （相同外形与封装尺寸） ——差异在于 ADC, Package, SRAM, Core, DAC.
快速对比工具——选择替代料号进行并排对比：
STM32F769IIT6
✅ 直接替换📋 参考替代料（不在目录中）
STM32F767IGT6
✅ 直接替换📋 参考替代料（不在目录中）
STM32F777IIT6
✅ 直接替换📋 参考替代料（不在目录中）
STM32F767BIT6
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$11.85 / 个
查看数据手册 →STM32F756IIT6
✅ 直接替换📋 参考替代料（不在目录中）
STM32F746IGT6
✅ 直接替换✓ 有现货
$13.76 / 个
查看数据手册 →STM32F767IIT6 最大额定值与电气特性
| Core | ARM Cortex-M7 32-bit RISC with FPU |
| 最大时钟频率 | 216 MHz |
| DMIPS | 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) |
| DSP Instructions | Yes (single-precision SIMD) |
| L1 Cache | 16 KB I-cache + 16 KB D-cache |
| ART Accelerator | Yes (0-wait-state Flash execution) |
| Flash Memory | 2 MB |
| SRAM | 512 KB |
| 封装 | 176-pin LQFP (24x24 mm) |
| Supply Voltage (VDD) | 1.7 V to 3.6 V |
| 工作温度 | -40 C to +85 C |
| USB | 2x USB OTG (FS + HS with on-chip PHY) |
| CAN | 2x CAN 2.0B |
| Ethernet | 10/100 MAC (MII/RMII) |
| SDMMC | 2x SDMMC |
| SPI / I2S | 6x SPI (2 with I2S) |
| I2C | 3x I2C |
| USART/UART | 4x USART + 2x UART |
| ADC | 3x 12-bit, up to 2.4 MSPS |
| DAC | 2x 12-bit |
| Timers | 12x 16-bit + 2x 32-bit |
| Crypto/Hash | AES-128/192/256, SHA-1/2, MD5, HMAC |
| Graphics | TFT LCD controller, JPEG codec, Chrom-ART DMA2D |
| 安装类型 | Surface Mount |
| MSL 等级 | 3 (168 hours) |
| RoHS 状态 | Compliant |
STM32F767IIT6 176-pin lqfp (24x24 mm) 引脚配置指南
STM32F767IIT6（176-pin lqfp (24x24 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： STM32F767IIT6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32F767IIT6 适用于 6 应用s: Industrial HMI with TFT LCD Panel, USB-Based Test and Measurement Instrument, Secure Industrial IoT Gateway, Motor Control and Industrial Drive, Audio Processing and USB Audio Class Device, Data Logger with Ethernet and SD Card.
Industrial HMI with TFT LCD Panel
The STM32F767IIT6 is purpose-built for industrial HMI applications, combining the integrated TFT LCD controller (up to 24-bit parallel RGB) with the Chrom-ART DMA2D accelerator and hardware JPEG codec. Its 2 MB Flash stores UI assets and fonts while 512 KB SRAM accommodates double-buffered framebuffers for flicker-free animation at WXGA resolutions. The 176-pin LQFP exposes the full parallel display interface plus SDRAM bus, allowing direct connection to a TFT panel without an external graphics controller. Industrial temperature range (-40 to +85 C) and EMC-robust GPIO support deployment on factory floors.
推荐
USB-Based Test and Measurement Instrument
The dual USB OTG controllers (FS + HS with on-chip PHY) make the STM32F767IIT6 ideal for USB instruments that stream high-bandwidth data to a host PC. The 216 MHz Cortex-M7 with FPU performs real-time DSP on analog inputs while the HS USB pipe delivers samples without CPU intervention via DMA. Combined with three 12-bit ADCs at up to 2.4 MSPS and 512 KB SRAM for sample buffering, the MCU replaces discrete DSP+USB-controller solutions. USB-C power delivery can be implemented on the FS port for self-powered bench instruments.
推荐
Secure Industrial IoT Gateway
The hardware AES-128/192/256, SHA-1/2, MD5 and HMAC engines on the STM32F767IIT6 enable TLS/DTLS termination without CPU load - critical for IoT gateways handling MQTT or CoAP traffic at scale. The integrated 10/100 Ethernet MAC with MII/RMII and dual CAN 2.0B interfaces support bridged connectivity between factory-floor PLCs and cloud backends. 2 MB Flash accommodates a full TLS stack plus application code while 512 KB SRAM runs lwIP or mbedTLS concurrently. TrustZone-M is not present on F7, but secure-boot via the integrated RNG and read-protected Flash provides adequate protection for edge deployments.
推荐
Motor Control and Industrial Drive
The 12 general-purpose 16-bit timers plus two 32-bit timers on the STM32F767IIT6 deliver the PWM channels needed for three-phase motor control of BLDC, PMSM, or stepper motors. Advanced timers with complementary outputs and programmable dead-time insertion simplify inverter half-bridge drive. The 216 MHz core executes field-oriented control loops within microseconds while the fast 12-bit ADC (2.4 MSPS) samples phase currents synchronously. CAN 2.0B integration allows direct connection to industrial fieldbus networks without an external transceiver MCU.
推荐
Audio Processing and USB Audio Class Device
The STM32F767IIT6 is popular for USB audio interfaces, MIDI controllers, and digital mixers because of its I2S-capable SPI ports, SAI interface, and 12-bit DAC for monitoring outputs. The hardware AES block can encrypt audio streams for secure conferencing applications. 512 KB SRAM buffers audio frames while the HS USB delivers multichannel uncompressed audio at low latency. The integrated TFT controller doubles the MCU as a touchscreen control surface for digital mixers, eliminating the need for a separate display MCU.
推荐
Data Logger with Ethernet and SD Card
The two SDMMC interfaces on the STM32F767IIT6 support simultaneous SD card storage plus Wi-Fi module SDIO connectivity, ideal for remote data loggers. The integrated Ethernet MAC and 2 MB Flash provide ample code space for FATFS plus HTTP/Modbus servers, while 512 KB SRAM accommodates TCP/IP socket buffers for high-throughput logging. RTC with VBAT domain plus low-power standby modes allows battery-backed timestamped logging across power cycles. The hardware CRC and AES accelerators ensure logged data integrity and optional encryption at rest.
推荐
推荐产品汇总
工程参考数据： STM32F767IIT6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32F769IIT6 | STM32F767IGT6 | STM32F777IIT6 | STM32F767BIT6 | STM32F756IIT6 | STM32F746IGT6 |
|---|---|---|---|---|---|---|---|
| Package | 176-LQFP (24x24) | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same | 176-LQFP (24x24) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core / Max Clock | Cortex-M7 / 216 MHz | Cortex-M7 / 216 MHz | Cortex-M7 / 216 MHz | Cortex-M7 / 216 MHz | Cortex-M7 / 216 MHz | Cortex-M7 / 216 MHz | Cortex-M7 / 216 MHz |
| Flash / SRAM | 2 MB / 512 KB | 2 MB / 512 KB | 1 MB / 320 KB | 2 MB / 512 KB | 2 MB / 512 KB | 1 MB / 320 KB | 1 MB / 320 KB |
| Crypto/Hash Block | Yes (AES/SHA) | Yes (AES/SHA) | Yes (AES/SHA) | Yes (AES/SHA) | Yes (AES/SHA) | No | No |
| MIPI-DSI Display Interface | No | Yes | No | Yes | No | No | No |
| USB OTG | 2x (FS + HS PHY) | 2x (FS + HS PHY) | 2x (FS + HS PHY) | 2x (FS + HS PHY) | 2x (FS + HS PHY) | 2x (FS + HS PHY) | 2x (FS + HS PHY) |
| Approx. Unit Price (qty 1) | $17.92 | higher (MIPI-DSI premium) | lower (less Flash/RAM) | highest (full-featured F7) | similar (revision B silicon) | lower (no crypto) | lowest in this list |
关键差异点
- Highest memory in 176-LQFP F7 family （对比 STM32F767IGT6)
- Hardware crypto accelerators integrated （对比 STM32F746IGT6)
- Built-in TFT + JPEG + Chrom-ART （对比 STM32F765IGT6)
- Dual USB OTG with on-chip PHY （对比 STM32F205VGT6)
设计说明
Provide at least 4.7 uF bulk decoupling on each VDD/VDDA/VDDUSB pin plus 100 nF ceramic caps within 2 mm of every supply pin. The 216 MHz core draws up to ~300 mA peak and inrush during Flash programming requires 4.7 uF minimum to prevent voltage droop. Place a ferrite bead between VDD and VDDA to isolate the analog domain from switching noise of the USB PHY and Ethernet MAC.
The 176-pin LQFP (24x24 mm) has 0.5 mm pitch - fanout requires either a 4-layer PCB with buried vias or a 2-layer PCB with via-in-pad if area is constrained. Route the parallel RGB bus with matched-length tracks (tolerance +/-100 mil) and keep SDRAM traces away from switching supplies. Use a continuous ground pour under the package thermal pad area to improve thermal dissipation and provide return-path continuity.
Do not enable the L1-cache in startup code without flushing - cache coherency issues with DMA buffers are the most common bug on STM32F7 designs. Use the cache maintenance macros (SCB_CleanDCache_by_Addr / SCB_InvalidateDCache_by_Addr) around DMA buffers that the CPU also reads. Estimated: at 216 MHz, with cache disabled the core runs at ~75% of the rated performance so benchmark your critical loops.
Keep the HSE crystal traces within 2 mm of the OSC_IN/OSC_OUT pins with a ground guard ring to minimize EMI. Place the 32.768 kHz LSE crystal close to the RTC domain and route VBAT through a ferrite if VBAT is shared with a backup battery. The USB HS PHY requires 90 ohm differential impedance on D+/D- traces - calibrate trace width to your stackup before PCB fabrication.
合规信息
RoHS compliant per ST product page. Not AEC-Q100 qualified - choose STM32F767IIT7 or specific automotive-grade part numbers for automotive deployments.