STM32G030F6P6 - 64MHz Cortex-M0+ MCU, 32KB Flash | STMicroelectronics
料号： STM32G030F6P6 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $1.25 | $1.25 |
| 10 | $1.12 | $11.20 |
| 100 | $0.98 | $98.00 |
| 500 | $0.85 | $425.00 |
| 1,000 | $0.75 | $750.00 |
STM32G030F6P6 概述
What is a microcontroller (MCU)? A microcontroller is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. The STM32G030F6P6 belongs to the STM32G0 series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This hierarchy positions it as a mainstream, entry-level MCU within the STM32 ecosystem, ideal for applications ranging from simple control loops to more complex sensor and communication tasks.
Key features of the STM32G030F6P6 include a 64 MHz Arm Cortex-M0+ core, 32 KB Flash, 8 KB SRAM, and a 2.0V to 3.6V supply range. It integrates a rich set of peripherals: I2C (with Fast-mode Plus up to 1 Mbit/s), USART, SPI, a 12-bit ADC, timers, and GPIOs. The device also supports a wide operating temperature range and is available in a 20-pin TSSOP package, making it suitable for space-constrained designs.
Technically, the STM32G030F6P6 leverages the energy-efficient Cortex-M0+ architecture, which balances processing capability with low power consumption. The inclusion of hardware parity on SRAM enhances data integrity, a critical feature for safety-conscious applications. The I2C interface supports Standard-mode (100 kbit/s), Fast-mode (400 kbit/s), and Fast-mode Plus (1 Mbit/s), providing flexible communication options. The 12-bit ADC enables precise analog signal acquisition, essential for sensor-based applications.
Typical applications include industrial control, consumer electronics, IoT devices, and simple automation systems. Its low cost and small footprint make it an excellent choice for high-volume products such as smart sensors, motor control, and portable devices. The wide supply voltage range and robust peripheral set ensure versatility across diverse use cases.
When designing with this MCU, consider the 2.0V to 3.6V supply range and ensure proper decoupling with a 100nF capacitor close to each power pin. The 20-pin TSSOP package requires careful PCB layout to minimize noise, especially for the ADC and high-speed I2C lines. Refer to the STM32G030F6 datasheet for detailed electrical characteristics and recommended layout guidelines.
直接替换替代料： STM32G030F6P6 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： STM32G030F6P6 （相同外形与封装尺寸） ——差异在于 Core, SRAM, Timers, Operating Temperature, Package.
快速对比工具——选择替代料号进行并排对比：
STM32G030F6P6TR
✅ 直接替换📋 参考替代料（不在目录中）
STM32G030F6P6T
✅ 直接替换📋 参考替代料（不在目录中）
STM32G030F6P6
✅ 直接替换✓ 有现货
$0.75 / 个
查看数据手册 →GD32E230F6P6
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
STM32F030F4P6
⚡ 相同封装✓ 有现货
$0.5768 / 个
查看数据手册 →STM32G030F6P6 最大额定值与电气特性
| Core | Arm Cortex-M0+ |
| Max Clock Frequency | 64 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB (with HW parity) |
| Supply Voltage Range | 2.0 V to 3.6 V |
| 封装 | 20-TSSOP |
| 安装类型 | Surface Mount |
| I2C Interfaces | 1 (Standard, Fast, Fast-mode Plus up to 1 Mbit/s) |
| USART Interfaces | 1 |
| SPI Interfaces | 1 |
| ADC | 12-bit, 1 (with multiple channels) |
| Timers | Multiple (general-purpose and basic) |
| GPIO Pins | Up to 18 (in 20-pin package) |
| 工作温度 | -40C to +85C |
| RoHS 状态 | Compliant |
STM32G030F6P6 引脚配置
| 引脚 1 | VBAT — Battery backup supply |
| 引脚 2 | PC14 — GPIO / OSC32_IN |
| 引脚 3 | PC15 — GPIO / OSC32_OUT |
| 引脚 4 | NRST — Reset (active low) |
| 引脚 5 | VDDA — Analog power supply |
| 引脚 6 | PA0 — GPIO / ADC_IN0 |
| 引脚 7 | PA1 — GPIO / ADC_IN1 |
| 引脚 8 | PA2 — GPIO / USART2_TX |
| 引脚 9 | PA3 — GPIO / USART2_RX |
| 引脚 10 | PA4 — GPIO / SPI1_NSS |
| 引脚 11 | PA5 — GPIO / SPI1_SCK |
| 引脚 12 | PA6 — GPIO / SPI1_MISO |
| 引脚 13 | PA7 — GPIO / SPI1_MOSI |
| 引脚 14 | PB0 — GPIO / ADC_IN8 |
| 引脚 15 | PB1 — GPIO / ADC_IN9 |
| 引脚 16 | VSS — Ground |
| 引脚 17 | VDD — Digital power supply |
| 引脚 18 | PA9 — GPIO / USART1_TX |
| 引脚 19 | PA10 — GPIO / USART1_RX |
| 引脚 20 | PA13 — GPIO / SWDIO |
典型应用
STM32G030F6P6 适用于 6 应用s: Industrial Control, Consumer Electronics, IoT Devices, Sensor Interfacing, Simple Automation, Portable Devices.
Industrial Control
The STM32G030F6P6 is well-suited for industrial control applications such as simple motor control, sensor interfacing, and automation. Its 64 MHz Cortex-M0+ core provides sufficient processing power for real-time control loops, while the 12-bit ADC enables precise analog signal acquisition. The wide supply voltage range (2.0-3.6V) allows direct operation from common industrial power rails. In a typical motor control application, the MCU generates PWM signals via its timers and reads current feedback through the ADC, enabling closed-loop speed control. The I2C and USART interfaces facilitate communication with external drivers and sensors. Compared to higher-end MCUs, the G030F6P6 offers a cost-effective solution without sacrificing essential peripherals, making it ideal for high-volume industrial products.
推荐
Consumer Electronics
In consumer electronics, the STM32G030F6P6 serves as a cost-efficient controller for devices like smart home sensors, remote controls, and small appliances. Its compact 20-pin TSSOP package fits space-constrained PCBs, while the low power consumption of the Cortex-M0+ core extends battery life in portable devices. The MCU's I2C interface can connect to environmental sensors (e.g., temperature, humidity), and its GPIOs can drive LEDs or small displays. For example, in a smart thermostat, the G030F6P6 reads temperature data via I2C, processes it, and controls a relay through a GPIO. The 32 KB Flash provides ample space for application firmware, and the 8 KB SRAM handles data buffering. This MCU balances performance and cost, making it a popular choice for mass-market consumer products.
推荐
IoT Devices
The STM32G030F6P6 is an excellent choice for IoT edge nodes that require low power and reliable communication. Its 64 MHz core efficiently handles protocol stacks for sensors and actuators, while the USART and SPI interfaces connect to wireless modules (e.g., LoRa, BLE). The MCU's low-power modes help extend battery life in remote sensors. In a typical IoT application, the G030F6P6 collects data from sensors via I2C, processes it, and transmits it over a wireless link using a USART-connected module. The 32 KB Flash is sufficient for lightweight firmware, and the 8 KB SRAM supports data buffering. The wide supply range (2.0-3.6V) accommodates battery-powered designs. This MCU provides a cost-effective, energy-efficient solution for smart agriculture, asset tracking, and environmental monitoring.
推荐
Sensor Interfacing
The STM32G030F6P6 excels at sensor interfacing due to its integrated 12-bit ADC and multiple communication interfaces. It can read analog sensors (e.g., thermistors, photodiodes) through the ADC and digital sensors (e.g., accelerometers, pressure sensors) via I2C or SPI. The MCU's processing power enables real-time data filtering and calibration. For example, in a weather station, the G030F6P6 reads temperature, humidity, and pressure sensors, processes the data, and displays it on an LCD. The 12-bit ADC provides sufficient resolution for most analog sensors, while the I2C interface supports multiple digital sensors on a single bus. The 20-pin package offers enough GPIOs for sensor control and status LEDs. This MCU is a versatile and cost-effective platform for sensor-based designs.
推荐
Simple Automation
The STM32G030F6P6 is ideal for simple automation tasks such as relay control, timer-based operations, and basic sequencing. Its timers can generate precise delays and PWM signals, while GPIOs control relays, solenoids, or LEDs. The MCU's 64 MHz core ensures responsive control logic. In a typical automation scenario, the G030F6P6 monitors a switch input, executes a pre-programmed sequence, and activates outputs via relays. The 32 KB Flash stores the control program, and the 8 KB SRAM handles state variables. The wide supply range and robust I/O make it suitable for industrial and home automation. This MCU offers a low-cost, reliable solution for automating repetitive tasks.
推荐
Portable Devices
The STM32G030F6P6 is well-suited for portable devices like handheld meters, fitness trackers, and remote controls, thanks to its low power consumption and compact package. The Cortex-M0+ core is energy-efficient, and the MCU supports low-power sleep modes to extend battery life. In a portable device, the G030F6P6 reads sensor data, processes it, and drives a small display or LED indicators. The 2.0-3.6V supply range allows direct operation from a Li-ion battery (3.0-4.2V) with a simple LDO. The 20-pin TSSOP package minimizes PCB area, enabling slim product designs. This MCU provides a balanced combination of performance, power efficiency, and cost, making it a popular choice for battery-powered consumer products.
推荐
推荐产品汇总
工程参考数据： STM32G030F6P6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32G030F6P6TR | GD32E230F6P6 | STM32F030F4P6 |
|---|---|---|---|---|
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Brand | STMicroelectronics | STMicroelectronics | GigaDevice | STMicroelectronics |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0 |
| Max Clock Frequency | 64 MHz | 64 MHz | 72 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 16 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 4 KB |
| Supply Voltage Range | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.4V to 3.6V |
| I2C Speed | Up to 1 Mbit/s (Fm+) | Up to 1 Mbit/s (Fm+) | Up to 1 Mbit/s (Fm+) | Up to 400 kbit/s (Fm) |
关键差异点
- Higher clock speed and more memory than older F0 series （对比 STM32F030F4P6)
- Wider supply voltage range （对比 STM32F030F4P6)
- Faster I2C with Fast-mode Plus （对比 STM32F030F4P6)
设计说明
The STM32G030F6P6 operates from 2.0V to 3.6V. Use a 100nF decoupling capacitor close to each VDD/VSS pair and a 1uF capacitor on VDDA. For battery-powered designs, consider the low-power modes (Sleep, Stop, Standby) to minimize current consumption. Ensure the power supply is stable and within the specified range to avoid brown-out resets.
For the 20-pin TSSOP package, ensure proper PCB layout with a solid ground plane. Keep analog and digital grounds separate and connect them at a single point. Place the crystal (if used) close to the OSC pins with proper load capacitors. For high-speed I2C (Fm+), minimize trace length and capacitance to maintain signal integrity.
Do not exceed the absolute maximum ratings, especially on supply voltage and I/O pins. Ensure the NRST pin is properly pulled up with a 100nF capacitor to ground for reliable reset. When using the ADC, avoid floating input pins and use appropriate sampling time. For I2C, ensure pull-up resistors are correctly sized for the bus speed.
合规信息
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified - this is a standard-grade MCU.
