STM32G030K6T6TR 64MHz 32KB MCU 32-LQFP | STMicroelectronics (Tape & Reel)
料号： STM32G030K6T6TR ✓ 量产中STM32G030K6T6TR 概述
What is a microcontroller? A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral interfaces into one component. An Arm Cortex-M0+ core provides a compact, energy-efficient architecture for real-time control tasks, while the STM32G0 family sits within the broader hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control component categories.
The STM32G030K6T6TR provides the verified headline resources of 64 MHz operating frequency, 32 KB Flash, and 8 KB SRAM. The 32-LQFP package exposes the device in a 7 x 7 mm surface-mount form factor suitable for compact control boards. Its mainstream value-line positioning makes it applicable to cost-sensitive embedded products where a small, general-purpose 32-bit MCU is sufficient.
The Arm Cortex-M0+ processor architecture supports firmware-driven control without requiring a separate processor, while integrated Flash and SRAM reduce the number of external memory components in simpler designs. Exact peripheral counts, voltage limits, I/O ratings, and electrical timing values are not included in the supplied verified snippets and are therefore not asserted here.
Typical application domains include industrial control, consumer electronics, small embedded controllers, sensor interfaces, and compact automation products. The verified product information identifies industrial control and consumer electronics as common applications, and the 64 MHz core and 32 KB memory footprint provide a clear platform for embedded logic, peripheral coordination, and control-loop software.
Designers should verify the complete electrical limits, pin multiplexing, clock configuration, memory programming requirements, and package drawing in the official STMicroelectronics product documentation before layout release. For a purchase decision, compare the required peripheral mix and software ecosystem against the exact device revision and package variant.
This product summary consolidates the verified manufacturer identity, distributor specifications, package information, and application context. Pricing and availability remain subject to distributor confirmation as of 2026-10-22, while detailed technical values not present in the supplied data are deliberately left for datasheet verification.
直接替换替代料： STM32G030K6T6TR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： STM32G030K6T6TR （相同外形与封装尺寸） ——差异在于 Flash Memory, Package, SRAM, Communication Interfaces, Product Type.
STM32G030K8T6
✅ 直接替换联系询价
查看数据手册 →STM32G070KBT6
✅ 直接替换联系询价
查看数据手册 →STM32F030K6T6TR
✅ 直接替换联系询价
查看数据手册 →STM32G030C8T6
✅ 直接替换✗ 无现货
$1.47 / 个
查看数据手册 →STM32G030K6T6TR 最大额定值与电气特性
| Product Type | 32-bit Arm Cortex-M0+ microcontroller |
| Maximum Core Frequency | 64 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 |
| SRAM | 8 KB |
| Processor Core | Arm Cortex-M0+ |
| Architecture | 32-bit RISC |
| Product Family | STM32G0 |
| Series Positioning | Mainstream value line |
| 封装 | 32-LQFP |
| Package Dimensions | 7 x 7 mm |
| 安装类型 | Surface mount |
| RoHS 状态 | Compliant |
| Moisture Sensitivity Level | MSL 3 |
STM32G030K6T6TR 7 x 7 mm 引脚配置指南
STM32G030K6T6TR（7 x 7 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： STM32G030K6T6TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32G030K6T6TR 适用于 6 应用s: Compact Industrial Control, Consumer Electronics Control, Sensor Interface Module, Small Automation Controller, Motor and Relay Interface, Communication-Enabled Embedded Node.
Compact Industrial Control
The STM32G030K6T6TR is a candidate for compact industrial-control boards because its Arm Cortex-M0+ core operates at up to 64 MHz and provides 32 KB of Flash plus 8 KB of SRAM. It can coordinate sensors, actuators, status indicators, and control logic in a 32-LQFP 7 x 7 mm footprint. Before committing, verify the required voltage, temperature range, I/O count, timer channels, communication peripherals, and protection requirements in the official datasheet.
推荐
Consumer Electronics Control
The STM32G030K6T6TR suits cost-sensitive consumer electronics that need a small embedded controller for user inputs, indicators, and low- to medium-complexity sequencing. Its 64 MHz Cortex-M0+ core and 8 KB SRAM provide embedded processing without requiring an external processor, while the 32-LQFP package supports conventional surface-mount assembly. Exact peripheral requirements and EMC-related implementation details must be checked for the target product.
推荐
Sensor Interface Module
The STM32G030K6T6TR can serve as the control MCU in a small sensor-interface module that acquires digital or mixed-signal sensor information and presents a local control output. The verified 32 KB Flash and 8 KB SRAM provide a defined firmware budget, while the 64 MHz core supports responsive peripheral handling. ADC characteristics, I/O voltage limits, sampling requirements, and sensor-specific timing are not available in the supplied snippets and must be verified before design selection.
推荐
Small Automation Controller
The STM32G030K6T6TR is suitable as a low-cost controller in small automation products where the design needs deterministic embedded firmware, local I/O, and compact packaging. The STM32G0 value-line positioning can fit relay, timer, and sequencing products where the full STM32 performance range is unnecessary. Confirm available timers, ADC channels, output-drive ratings, watchdog behavior, and any environmental qualification requirements in the manufacturer documentation.
推荐
Motor and Relay Interface
The STM32G030K6T6TR can manage sequencing and control logic for small relay or motor-interface boards where a 32-bit MCU and compact 32-LQFP package are useful. The verified resources support embedded coordination, but external transistors, flyback protection, current sensing, and protection components are still required for inductive loads. Confirm timer output capability, pin drive limits, and electrical isolation needs before selecting the MCU for a given power stage.
推荐
Communication-Enabled Embedded Node
The STM32G030K6T6TR can form the basis of a compact embedded communications node when its verified Cortex-M0+ performance and memory are sufficient for local protocol handling. An external transceiver may be required for RS-485, CAN, or another physical layer; the supplied data does not specify which communication peripherals are integrated. Pin multiplexing, timing, bus-level requirements, and firmware porting must therefore be validated before a hardware release.
推荐
推荐产品汇总
工程参考数据： STM32G030K6T6TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32G030K8T6 | STM32G030K6T6TRTR | STM32G070KBT6 | STM32F030K6T6TR | STM32G030C8T6 |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Series | STM32G0 | STM32G0 | STM32G0 | STM32G0 | STM32F0 | STM32G0 |
关键差异点
- Mainstream STM32G0 Cortex-M0+ platform （对比 STM32F030K6T6TR)
- Compact 32-LQFP footprint （对比 STM32G030C8T6)
- Defined embedded memory budget （对比 STM32G070KBT6)
设计说明
Use the official STM32G030K6 package drawing and pinout rather than relying on a generic 32-LQFP footprint. Confirm the exposed pad or thermal arrangement, pin-1 orientation, and every power and ground connection against the manufacturer documentation. The supplied verified data establishes the 32-LQFP 7 x 7 mm package but does not provide the complete pin map.
Follow the manufacturer’s recommended decoupling and power-supply startup requirements. Because the supplied snippets do not specify operating voltage, current limits, or regulator sequencing, do not infer those values from the 64 MHz frequency or package size. Verify the power tree, voltage tolerances, and grounding strategy in the official datasheet and reference design.
Place the MCU, bypass capacitors, clock components, and programming/debug access according to the official reference layout. Keep sensitive timing and communication paths short, provide a clean return path for digital signals, and reserve test points for firmware bring-up. Exact pin multiplexing and peripheral constraints must be checked for the selected STM32G030K6 device.
合规信息
The verified PartGenie result states RoHS compliant and MSL 3. The supplied data does not verify REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status.