STM8L152R6T6TR - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics (Tape & Reel)
料号: STM8L152R6T6TR ✓ 量产中STM8L152R6T6TR 概述
An ultra-low-power microcontroller, or ULP MCU, is a semiconductor that prioritizes low current consumption while retaining the peripherals and processing capability needed for compact embedded products. The STM8L152 family belongs to the STM8L EnergyLite product line and can sit within an embedded control system that measures, controls, communicates, and manages power without requiring a high-performance processor.
Key features include up to 16 MHz processing performance, 32 KB Flash organized as 32K x 8, and a 16 MHz operating specification reported by the product listing. The device also supports an operating power supply down to 3.6 V in power-down operation, operation up to 125°C according to the component specification listing, and multiple serial and analog peripherals for reducing external component count.
The STM8L152R6T6TR uses the enhanced STM8 8-bit architecture and is designed for applications where energy efficiency, fast wake-up, and integrated mixed-signal resources matter more than a large memory map. Its peripheral set includes an RTC for timekeeping, LCD support for human-machine interfaces, USART and I2C for serial communication, SPI for higher-speed peripheral links, and ADC, DAC, and comparator resources for sensor and control circuits.
Typical applications include low-energy sensor nodes, compact industrial monitors, building and access controls, battery-operated instruments, LCD-based meters, smart home endpoints, and portable measurement equipment. The 64-LQFP package also provides enough pins for external memory, display connections, communications, and analog inputs when required by a compact industrial design.
When laying out the circuit, follow the manufacturer pin-description and package-connection tables rather than inferring unused pins. Place decoupling capacitors close to the supply pins, keep sensitive analog and digital return paths controlled, and verify startup, reset, clock, and power-down behavior against the device's configuration. The mixed supply limits shown across operating modes should be checked for every rail in the final power tree.
This product page consolidates the exact STM8L152R6T6TR identity, package and memory details, drop-in candidates, comparison parameters, and practical design guidance. It supports faster engineering decisions by connecting the device's low-power architecture and peripheral inventory to concrete embedded applications while keeping unresolved electrical details explicit rather than inferred.
直接替换替代料: STM8L152R6T6TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM8L152R6T6TR (相同外形与封装尺寸) ——差异在于 CPU Architecture, Product Type.
STM8L151R6T6TR
✅ 直接替换联系询价
查看数据手册 →STM8L152R6T3
✅ 直接替换📋 参考替代料(不在目录中)
STM8L151R6T3
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
STM8L151R6T6
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →STM8L152R6T6TR 最大额定值与电气特性
| Product Type | 8-bit ultra-low-power microcontroller |
| Product Family | STM8L EnergyLite |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Data EEPROM | 1 KB |
| CPU Architecture | 8-bit STM8 |
| 封装 | 64-LQFP (10 x 10 mm) |
| 引脚数量 | 64 pins |
| 安装类型 | Surface mount |
| Operating Supply Range | 3.6 V down to the power-down operating limit |
| Maximum Operating Temperature | 125°C |
| RTC | Integrated real-time clock |
| LCD Controller | Integrated LCD support |
| Serial Interfaces | USART, I2C, and SPI |
| Analog Peripherals | ADC, DAC, and comparators |
| Timers | Integrated timers |
| 生命周期状态 | Active |
STM8L152R6T6TR 64-lqfp (10 x 10 mm) 引脚配置指南
STM8L152R6T6TR(64-lqfp (10 x 10 mm) 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM8L152R6T6TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM8L152R6T6TR 适用于 6 应用s: Battery-Powered Sensor Node, Industrial Environmental Monitor, LCD-Enabled Metering Device, Smart Home and Access Control, Portable Medical Sensor Interface, Low-Power Communication Endpoint.
Battery-Powered Sensor Node
The STM8L152R6T6TR fits battery-powered sensor nodes because its STM8L architecture is designed for ultra-low-power operation while retaining a 16 MHz processing rate and 32 KB Flash. Its ADC and comparator resources can acquire analog sensor signals, while USART, I2C, or SPI connects the node to external sensing or radio modules. The integrated RTC can preserve timing information between samples, reducing the need for a separate timekeeper. For a duty-cycled design, configure the MCU for its lowest suitable operating mode between measurements, then restore the active clock before processing. Actual battery life depends on sensor current, wake interval, radio duty cycle, and the selected STM8L power mode rather than on CPU frequency alone.
推荐
Industrial Environmental Monitor
The STM8L152R6T6TR is appropriate for compact industrial environmental monitors that combine periodic sensing, local data logging, and low-power operation. Its 32 KB Flash provides room for firmware and configuration, while the 16 MHz STM8 core can manage scheduled sampling and control logic. The ADC supports analog sensor inputs, and the comparators can provide threshold or alarm functions without continuous software polling. USART, I2C, and SPI allow the monitor to connect to an external radio, memory, or digital sensor. The 64-LQFP 10 x 10 mm package also exposes enough pins for alarm outputs, status indicators, and multiple communication functions. In deployed equipment, verify the complete operating-temperature range, supply tolerances, and power-down limits against the manufacturer datasheet.
推荐
LCD-Enabled Metering Device
The STM8L152R6T6TR suits LCD-enabled metering devices because the microcontroller integrates LCD support alongside an RTC, ADC, and 32 KB Flash. A meter can acquire a sensor reading, convert it, update a local display, and maintain time stamps without requiring a separate display controller. The RTC is especially useful for energy meters, interval counters, and maintenance equipment where operating history matters. At 16 MHz, the 8-bit core can service display updates and keypad input while leaving peripheral functions available for measurement and communication. Keep the LCD glass drive and analog measurement paths on the layout recommended by the manufacturer, and account for the LCD bias and charge-pump requirements in the power budget. Select the exact temperature grade only after checking the product's operating environment.
推荐
Smart Home and Access Control
The STM8L152R6T6TR can serve as the low-power controller in a smart-home accessory or access-control peripheral. Its integrated UART, I2C, and SPI interfaces allow connection to credential readers, lock actuators, keypads, displays, or wireless modules. The RTC supports time-based access schedules and event logging, while the ADC and comparators can monitor analog door contacts, tamper inputs, or supply conditions. The 32 KB Flash capacity supports compact application firmware and parameter storage, and the ultra-low-power architecture is beneficial in devices that spend most of their time idle. Use the enable and low-power sequencing strategy appropriate for the actuator load, and include local fail-safe behavior so a communications failure does not leave a lock or sensor in an unsafe state.
推荐
Portable Medical Sensor Interface
The STM8L152R6T6TR is suitable for a portable sensing interface when the design requires low power, local signal conditioning, and serial data transfer. Its ADC supports analog front-end sampling, while comparators can implement threshold detection, and the 16 MHz core can manage calibration, filtering, and data packaging. The 32 KB Flash accommodates a focused firmware image, and the integrated RTC can time-stamp measurements. In a portable instrument, keep analog inputs away from high-switching digital nodes, establish a controlled reference and ground arrangement, and verify the ADC accuracy and acquisition requirements in the manufacturer datasheet. Safety-critical medical claims require application-level validation; the MCU choice alone does not establish compliance with medical-device standards.
推荐
Low-Power Communication Endpoint
The STM8L152R6T6TR works well as the control endpoint beside a wireless or wired communications module because it provides several serial interfaces without requiring a large processor. A USART can support a cellular or GPS module, I2C can connect to a sensor hub, and SPI can reach a higher-speed transceiver or display. The MCU can validate incoming commands, manage low-power wake-up behavior, and retain product-specific state in its 32 KB Flash. In a communication endpoint, separate radio supply current from the MCU rail where practical, provide local decoupling, and avoid routing high-current switching edges alongside sensitive antenna or measurement paths. The RTC and comparators add useful timekeeping and wake or fault-detection functions without demanding a separate device.
推荐
推荐产品汇总
工程参考数据: STM8L152R6T6TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM8L151R6T6TR | STM8L152R6T3 | STM8L152R6T6TRTR | STM8L151R6T3 | STM8L151R6T6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Serial Interfaces | USART, I2C, and SPI | USART, I2C, and SPI | USART, I2C, and SPI | USART, I2C, and SPI | USART, I2C, and SPI | USART, I2C, and SPI |
| Analog Resources | ADC, DAC, and comparators | ADC, DAC, and comparators | ADC, DAC, and comparators | ADC, DAC, and comparators | ADC, DAC, and comparators | ADC, DAC, and comparators |
关键差异点
- Integrated RTC and LCD resources distinguish the target from the STM8L151 candidate (对比 STM8L151R6T6TR)
- Higher specified temperature grade for extended-temperature operation (对比 STM8L152R6T3)
- Identical core, memory, package, and peripheral foundation (对比 STM8L152R6T6TRTR)
设计说明
Establish the complete power tree before placing decoupling components. The STM8L152R6T6TR supports multiple low-power operating states, and the exact operating supply range varies by mode. Verify that every active, idle, and power-down rail remains within the manufacturer limits. Place the required input and bulk capacitors directly beside their associated supply pins, using the datasheet's recommended capacitance and voltage characteristics rather than a generic ceramic default.
Use the 64-LQFP pin-description table as the authoritative assignment guide for reset, clock, analog inputs, communications, and LCD signals. Keep high-current LCD or actuator outputs away from ADC and comparator inputs, provide a direct return path for analog measurements, and avoid routing switching edges beneath sensitive nodes. Check land geometry against the manufacturer's 10 x 10 mm LQFP drawing and verify the exposed-pad treatment if the package uses one.
Do not assume that every STM8L152R6 ordering suffix has the same temperature rating. The T6 device is identified as operating up to 125°C, while T3 is a different temperature grade. Before substituting STM8L152R6T3 or an STM8L151 variant, check memory size, RTC and LCD requirements, pin assignments, clock setup, firmware device identifier, and operating-temperature limits against the manufacturer documentation.
For mixed-signal designs, separate analog and digital paths, keep comparator inputs away from fast switching nets, and reference analog returns to the device's quiet ground structure. The ADC, DAC, and comparators can reduce external signal-chain components, but their usable accuracy and reference stability still depend on clean power, suitable grounding, and careful component selection. Validate channel crosstalk and acquisition performance at the intended operating frequency.
合规信息
The exact-part records identify the device as active but do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Confirm current compliance documents with STMicroelectronics before procurement.