Microchip Technology

SY88903VKG - 1.25Gbps Limiting Postamplifier | Microchip

料号: SY88903VKG ✓ 量产中
3.3 V to 5.0 V Vdss 10-MSOP Package
最小起订量: 1 |

SY88903VKG 概述

The Microchip Technology SY88903VKG is a 1.25 Gbps high-speed limiting postamplifier IC designed for fiber-optic receiver paths, supplied in a 10-MSOP package. It operates from a 3.3 V to 5.0 V supply and conditions the linear output of a transimpedance amplifier into a digital signal suitable for downstream clock, data-recovery, or receiver circuitry. The limiting function reduces amplitude-dependent noise and timing variation before the signal reaches the next logic stage.

A limiting amplifier is a special-purpose amplifier that converts a noisy, variable-amplitude signal into a standardized digital output. In the optical-communication hierarchy, it sits between the transimpedance amplifier and the digital receiver or clock-and-data-recovery circuit. The SY88903V family therefore belongs to high-speed interface ICs rather than general-purpose precision amplifiers. Its 1.25 Gbps data rate makes it applicable to legacy fiber-optic links operating at 1.25 Gbps, including 1.25 Gb/s Ethernet-oriented receiver chains.

The principal feature is the integrated limiting function. According to the Microchip SY88903V manufacturer datasheet, the circuit quantizes the signal from a typical fiber-optic transimpedance amplifier, producing a repeatable digital output from a signal whose amplitude and noise content may otherwise vary. Operation from either 3.3 V or 5 V provides flexibility for receiver designs operating at either logic level. The 10-MSOP outline also supports compact surface-mount implementation in optical transceiver and line-card equipment.

The SY88903V family architecture places the limiting amplifier directly behind a typical transimpedance amplifier in a fiber-optic link. That arrangement separates the photodiode current-to-voltage conversion stage from the high-gain digital-conditioning stage. The postamplifier therefore requires a suitable upstream signal amplitude and should be evaluated together with the transimpedance amplifier, clock-and-data-recovery device, transmission-line geometry, and termination network. Its stated 1.25 Gbps capability identifies the intended operating class rather than a general-purpose continuous analog bandwidth specification.

Typical uses include 1.25 Gbps optical receivers, fiber-optic transceiver modules, optical network-interface equipment, PON-related receiver paths, and clock-and-data-recovery front ends. In each case, the SY88903VKG accepts the output of a transimpedance amplifier and provides a limited output for downstream digital processing. The 3.3 V to 5.0 V supply range allows the same device family to support both legacy 5 V receiver electronics and lower-voltage mixed-signal systems.

PCB implementation requires close attention to high-speed signal integrity. Keep the transimpedance-amplifier output connection to the limiting-amplifier input short, use a continuous reference plane, provide proper supply bypassing, and observe the manufacturer guidance for input and output termination. Differential routing between the limiting stage and downstream circuitry may require matched impedance, controlled pair spacing, and verification of crosstalk and jitter performance across the assembled board.

This product page combines the manufacturer function description, package and interface characteristics, application guidance, verified sourcing information, and practical implementation considerations. It also distinguishes the confirmed 1.25 Gbps limiting-postamplifier role from broader transceiver functions, helping engineers determine whether the device belongs in the receiver signal chain and how to evaluate it against system-level requirements.

直接替换替代料: SY88903VKG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

SY88903VKG-TR

✅ 直接替换
📦 10-MSOP
Uses the same 10-MSOP package and 1.25 Gbps limiting-amplifier function; ordering or packaging convention differs, while the comparison listing notes some electrical-characteristic differences.

📋 参考替代料(不在目录中)

SY88903VKG 最大额定值与电气特性

Product Type Limiting postamplifier IC
数据速率 1.25 Gbps
Supply Voltage Range 3.3 V to 5.0 V
Minimum Listed Supply Voltage 2.97 V
Maximum Listed Supply Voltage 5.5 V
封装 10-MSOP
Package Description 10-TFSOP, 10-MSOP, 3.00 mm width
安装类型 Surface mount
引脚数量 10 pins
Primary Application High-frequency fiber-optic links
Input Signal Source Transimpedance amplifier output
Output Function Limited digital output
Signal Conditioning Amplitude limiting and signal quantization
Application Category Optical networks
Manufacturer Microchip Technology

SY88903VKG 10-tfsop, 10-msop, 3.00 mm width 引脚配置指南

SY88903VKG(10-tfsop, 10-msop, 3.00 mm width 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

SY88903VKG 的 10-tfsop, 10-msop, 3.00 mm width 封装引脚图

暂无详细引脚数据: SY88903VKG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SY88903VKG 适用于 6 应用s: 1.25 Gbps Fiber-Optic Receiver, Optical Transceiver Module Receiver, PON Optical Network Interface, Clock-and-Data-Recovery Front End, Optical Line-Card Receive Path, High-Speed Fiber-Optic Test Equipment.

🌐

1.25 Gbps Fiber-Optic Receiver

The SY88903VKG fits at the output of a transimpedance amplifier in a 1.25 Gbps fiber-optic receiver. The upstream photoreceiver converts optical current into a noisy linear voltage, while the SY88903VKG provides the dedicated limiting or quantization function needed to produce a repeatable digital output. Its stated 1.25 Gbps rate matches the intended legacy optical-link class, and its 3.3 V to 5.0 V operating range supports both 5 V and lower-voltage receiver architectures. The 10-MSOP package also permits a compact implementation, although correct high-speed layout and decoupling remain essential to preserve timing performance.

📡

Optical Transceiver Module Receiver

Inside an optical transceiver module, the SY88903VKG can condition the signal produced by the receive-side transimpedance amplifier before it reaches a clock-and-data-recovery circuit. This is useful when the optical detector output contains amplitude variation and noise that would otherwise affect digital timing. The device supports 3.3 V and 5 V supply arrangements and comes in a 10-MSOP surface-mount package suited to compact modules. Designers should minimize the distance from the transimpedance output, maintain a continuous return path, and follow the manufacturer application circuit for termination and bypass placement.

🖥️

PON Optical Network Interface

The SY88903VKG is applicable to receiver paths in 1.25 Gbps-class optical network equipment, including designs related to PON links. Its limiting action provides a digital output from the linear transimpedance-amplifier signal, helping isolate downstream logic from noise and amplitude variation. The confirmed 3.3 V to 5.0 V supply range supports mixed receiver architectures, while the 10-MSOP package helps conserve board area. For PON service, engineers must also verify burst-mode settling, jitter, sensitivity, and loss-budget requirements at the system level rather than relying on the amplifier data rate alone.

🖥️

Clock-and-Data-Recovery Front End

The SY88903VKG can serve as the limiting stage immediately before a clock-and-data-recovery circuit in a 1.25 Gbps optical link. The transimpedance amplifier supplies the analog waveform, and the SY88903VKG converts that waveform into a more repeatable digital signal for timing recovery. Using a dedicated limiting amplifier allows the receive chain to separate analog signal conditioning from clock extraction and data decoding. The design must provide the required input amplitude and use controlled high-speed routing, with power and ground distribution designed to prevent added jitter or data corruption during simultaneous switching.

🏭

Optical Line-Card Receive Path

A 1.25 Gbps optical line card can use the SY88903VKG to condition a photodiode-receiver signal before digital processing. The device is suited to the legacy fiber-optic signaling rate identified in its 1.25 Gbps specification and accepts the linear output of a typical transimpedance amplifier. Its 3.3 V to 5.0 V supply range permits integration into receiver boards designed around either logic voltage. A 10-MSOP package supports conventional surface-mount assembly, but layout should preserve short input interconnects, controlled output impedance, and a low-impedance supply and ground distribution network.

🔧

High-Speed Fiber-Optic Test Equipment

The SY88903VKG can be used in a 1.25 Gbps fiber-optic test fixture or receiver card that needs to convert a transimpedance-amplifier waveform into a digital test signal. Its dedicated limiting function provides a repeatable output for downstream clock, logic, or measurement circuitry, while the 3.3 V to 5.0 V range supports adaptable test-interface voltage levels. The compact 10-MSOP outline simplifies board construction, but accurate measurements still depend on controlled impedance, short high-speed paths, suitable terminations, and careful separation from noisy analog or switching circuitry.

推荐产品汇总

SY88903V Same limiting-postamplifier family 用于: 1.25 Gbps Fiber-Optic Receiver, Optical Transceiver Module Receiver, PON Optical Network Interface, Clock-and-Data-Recovery Front End, Optical Line-Card Receive Path, High-Speed Fiber-Optic Test Equipment SY88903VKG-TR Alternate ordering form of the same 10-MSOP device 用于: 1.25 Gbps Fiber-Optic Receiver, Optical Transceiver Module Receiver, PON Optical Network Interface, Clock-and-Data-Recovery Front End, Optical Line-Card Receive Path, High-Speed Fiber-Optic Test Equipment
What is the SY88903VKG used for?
The SY88903VKG is a 1.25 Gbps limiting postamplifier used in high-speed fiber-optic receiver circuits. According to the Microchip SY88903V manufacturer datasheet, it receives the linear output of a transimpedance amplifier, quantizes that signal, and provides a limited output for downstream digital circuitry. It operates from a 3.3 V to 5.0 V supply and is packaged in 10-MSOP.
What type of IC is the SY88903VKG?
The SY88903VKG is a special-purpose limiting postamplifier IC for optical-network and fiber-optic receiver equipment. Its core function is to condition the noisy, variable-amplitude output of a transimpedance amplifier into a standardized digital signal. The manufacturer identifies a maximum signaling rate of 1.25 Gbps, a 3.3 V to 5.0 V operating range, and a 10-MSOP package.
What is the data rate of the SY88903VKG?
The SY88903VKG supports data rates up to 1.25 Gbps. This value describes the intended high-speed fiber-optic receiver class rather than a general-purpose analog gain-bandwidth rating. According to the Microchip SY88903V manufacturer datasheet, the device is an integrated limiting amplifier designed for use after a typical transimpedance amplifier in a fiber-optic link.
What supply voltage does the SY88903VKG use?
The SY88903VKG is specified for operation from 3.3 V to 5.0 V. The verified part information also lists a 2.97 V minimum and 5.5 V maximum supply-voltage boundary. This allows the device to be used in either 3.3 V or 5 V receiver architectures, subject to the signal-level, timing, and bypass requirements stated in the manufacturer datasheet.
Where can I download the SY88903VKG datasheet PDF?
The official SY88903V datasheet PDF is available from Microchip Technology at the manufacturer link listed on this page. It describes the SY88903V limiting-amplifier family used in fiber-optic applications with transimpedance amplifiers. Use the manufacturer document for the complete pin descriptions, electrical characteristics, application circuit, and recommended decoupling values before completing the PCB layout.
Where is the SY88903VKG pinout located?
The SY88903VKG pinout is defined in the pin-description section of the Microchip SY88903V manufacturer datasheet. The device uses a 10-MSOP package with 10 lead positions. Because the detailed lead names are not published in the product listing, use the manufacturer pin-description table when assigning tracks, supplies, grounds, terminations, and no-connect positions.
Can the SY88903VKG operate from a 3.3 V supply?
Yes, the SY88903VKG is designed to operate from a 3.3 V supply as well as a 5 V supply. Its stated operating range is 3.3 V to 5.0 V, while the verified component data lists 2.97 V to 5.5 V as the broader supply-voltage boundary. The complete circuit must still satisfy the signal-amplitude, timing, and power-bypass requirements of the manufacturer datasheet.
What is the difference between SY88903VKG and SY88903VKG-TR?
The SY88903VKG and SY88903VKG-TR identify the same 10-MSOP limiting-postamplifier device with different ordering or packaging conventions. The comparison listing describes both as a 10-pin MSOP limiting amplifier, while the technical device data identifies 1.25 Gbps operation and a 3.3 V to 5.0 V supply range. Confirm the required package and shipment form before ordering the exact orderable suffix.
What is the best drop-in replacement for the SY88903VKG?
The SY88903VKG-TR is the closest documented drop-in match because it retains the 10-MSOP package and the same 1.25 Gbps limiting-amplifier function. The comparison listing identifies both parts as 10-pin MSOP devices, but the electrical characteristics are described as having some differences, so verify supply, signal levels, timing, and enable or output behavior against the manufacturer datasheet before substitution.
Can I replace the SY88903VKG with a generic limiting amplifier?
A generic limiting amplifier should not be treated as a direct replacement without a detailed pin and parameter review. The SY88903VKG is a 1.25 Gbps fiber-optic limiting postamplifier in a 10-MSOP package, so input thresholds, output levels, supply requirements, timing behavior, and high-speed layout must all match. Use the Request a Quote form on this page when sourcing an exact replacement.
Is the SY88903VKG suitable for a PON receiver?
The SY88903VKG can be considered for a PON receiver path when the upstream transimpedance amplifier provides the signal amplitude and timing required by the limiting stage. Its 1.25 Gbps specification, 3.3 V to 5.0 V supply range, and optical-network application classification align with legacy burst-mode fiber-optic receiver architectures. Confirm burst settling, sensitivity, and interface requirements in the system specification.
When should I choose the SY88903VKG instead of a general-purpose amplifier?
Choose the SY88903VKG when the design requires a dedicated 1.25 Gbps limiting function after a fiber-optic transimpedance amplifier. A general-purpose amplifier may provide adjustable gain, but it does not inherently provide the same amplitude quantization, threshold behavior, or intended high-speed receiver integration. The SY88903VKG is therefore more appropriate when repeatable digital output from a noisy linear signal is the primary requirement.
How should I lay out the SY88903VKG in a high-speed PCB?
Place the SY88903VKG close to the driving transimpedance amplifier and use a short, continuous connection to its input. Keep supply bypassing close to the relevant pins, provide an uninterrupted ground plane, and follow the manufacturer application circuit for termination. Differential outputs should use controlled impedance and matched routing if the downstream receiver requires it.
Where can I buy the SY88903VKG online?
Use the Request a Quote form on this page to request the current SY88903VKG price, stock status, lead time, and minimum order quantity. The listing identifies the exact 10-MSOP part, but commercial conditions can change without notice. The quote form is the appropriate route for current purchasing rather than relying on a static historical price.
What is the price of the SY88903VKG?
The current SY88903VKG price is obtained through the Request a Quote form on this page. Pricing depends on order quantity, availability, and purchasing terms, and the form should be used for a current quotation. The manufacturer datasheet and distributor listings can be used to confirm the exact MPN, 1.25 Gbps function, and 10-MSOP package before placing an order.
What is the lead time and stock status for the SY88903VKG?
Current lead time, stock, and minimum order quantity for the SY88903VKG should be requested through the Request a Quote form on this page. The part is actively listed for sourcing, but live inventory and manufacturing allocation can vary. Include your required quantity, target date, and permitted package suffix in the request to obtain an actionable commercial response.
What are the key specifications engineers should know about the SY88903VKG?
The key confirmed specifications are a 1.25 Gbps maximum data rate, 3.3 V to 5.0 V operation, limiting-postamplifier functionality, and a 10-MSOP surface-mount package. The device is intended to follow a transimpedance amplifier in a fiber-optic link and convert a noisy linear signal into a limited digital output. Detailed pin, threshold, timing, and electrical limits must be taken from the manufacturer datasheet.

工程参考数据: SY88903VKG ——对比、设计指导和合规信息。

选型指南

Choose the SY88903VKG when designing a 1.25 Gbps fiber-optic receiver that requires a dedicated limiting stage after a transimpedance amplifier. Its 3.3 V to 5.0 V operating range supports both 5 V and lower-voltage receiver architectures, while the 10-MSOP package supports compact surface-mount construction. SY88903VKG-TR is the closest documented alternative because it retains the same 10-MSOP limiting-amplifier package, although the comparison listing indicates that some electrical characteristics differ. Verify those characteristics, pin behavior, signal thresholds, and timing before substitution. For designs requiring different data rates, supply voltages, package dimensions, or output interfaces, do not treat a generic limiting amplifier as a drop-in replacement. Validate the complete receiver chain, including transimpedance-amplifier output swing, board-level jitter, termination, bypass effectiveness, and downstream logic compatibility.

与替代料对比

参数 本产品 SY88903VKG-TR
Package 10-MSOP 10-MSOP
Brand Microchip Technology Microchip Technology
Product Type Limiting postamplifier Limiting amplifier
Pin Count 10 pins 10 pins

关键差异点

  • Dedicated 1.25 Gbps fiber-optic limiting function (对比 SY88903VKG-TR)
  • Dual 3.3 V and 5.0 V operating capability (对比 SY88903VKG-TR)
  • Post-transimpedance-amplifier signal conditioning (对比 SY88903VKG-TR)

设计说明

Place the SY88903VKG close to the driving transimpedance amplifier and keep the input trace short and continuous. High-speed receiver performance can be degraded by reflected signals, impedance discontinuities, and coupling from unrelated digital or switching circuitry. Apply the termination arrangement specified by the manufacturer application circuit and verify the assembled board with an eye-diagram or equivalent signal-integrity test.

Route high-speed outputs over a continuous reference plane and maintain the impedance required by the transmitter and receiver interfaces. Avoid vias, test pads, and long stubs when they are not part of the qualified design. Keep the clock and data paths away from noisy power-converter loops, and use short ground-return paths so switching current does not add jitter to the limited output.

Use the manufacturer-recommended bypass capacitors and place them close to the supply and ground pins. Because the SY88903VKG can operate from 3.3 V or 5.0 V, the selected supply must remain within the stated operating range while also supporting the signal levels required by the upstream transimpedance amplifier and downstream logic. Check startup and supply sequencing in the complete receiver design.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this part. AEC-Q100 is treated as not applicable because the product is an optical communications amplifier IC rather than an automotive-qualified device.

数据核验日期: 2026-11-20 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

SY88903VKG datasheet SY88903VKG pinout SY88903VKG datasheet pdf SY88903VKG schematic SY88903VKG equivalent SY88903VKG replacement SY88903VKG cross reference SY88903VKG vs SY88903VKG-TR SY88903VKG footprint SY88903VKG price SY88903VKG stock Microchip Technology SY88903VKG SY88903VKG 10-MSOP pinout SY88903VKG optical receiver application

相关元器件 & 术语

Microchip Technology SY88903VKG SY88903VKG-TR SY88903V limiting postamplifier limiting amplifier special-purpose amplifier amplifier IC high-speed interface IC fiber-optic receiver optical network transimpedance amplifier clock-and-data recovery 1.25 Gbps 3.3 V power supply 5.0 V power supply 10-MSOP MSOP package family surface-mount technology signal quantization amplitude limiting PECL TTL output PON
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情